Engineering topics

Nielander, Adam C.

Publications and source records attributed to Nielander, Adam C..

11 records

DOE OSTI2024

Electrodialysis and nitrate reduction (EDNR) to enable distributed ammonia manufacturing from wastewaters

Underutilized wastewaters containing dilute levels of reactive nitrogen (Nr) can help rebalance the nitrogen cycle. This study describes electrodialysis and nitrate reduction (EDNR), a reactive electrochemical separation architecture that combines catalysis and separations to remediate nitrate and ammonium-polluted wastewaters while recovering ammonia. By engineering operating parameters (e.g., background electrolyte, applied potential, electrolyte flow rate), we achieved high recovery and conversion of Nr in both simulated and real wastewaters. The EDNR process demonstrated long-term robustness and up-concentration that recovered >100 mM ammonium fertilizer solution from agricultural runoff that contained 8.2 mM Nr. EDNR is the first reported process to our knowledge that remediates dilute real wastewater and recovers ammonia from multiple Nr pollutants, with an energy consumption (245 MJ per kg NH 3 –N in simulated wastewater, 920 MJ per kg NH 3 –N in agricultural runoff) on par with the state-of-the-art. Demonstrated first at proof-of-concept and engineered to technology readiness level (TRL) 4–5, EDNR shows great promise for distributed wastewater treatment and sustainable ammonia manufacturing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Addressing challenges for operating electrochemical solar fuels technologies under variable and diurnal conditions

The outdoor operation of electrochemical solar fuels devices must contend with challenges presented by the cycles of solar irradiance, temperature, and other meteorological factors. Herein, we discuss challenges associated with these fluctuations presented over three timescales, including the effects of diurnal cycling over the course of many days, a single diurnal cycle over the course of hours, and meteorological phenomena that cause fluctuations on the order of seconds to minutes. We also highlight both reaction-independent and reaction-specific effects of variable conditions for the hydrogen evolution reaction and CO 2 reduction reaction. We identify key areas of research for advancing the outdoor operation of solar fuels technology and highlight the need for metrics and benchmarks to enable the comparison of diurnal studies across systems and geographical locations.

08 HYDROGEN↗

DOE OSTI2024

CO 2 Conversion to Butene via a Tandem Photovoltaic–Electrochemical/Photothermocatalytic Process: A Co-design Approach to Coupled Microenvironments

Here, we developed a tandem, unassisted, solar-driven electrochemical and photothermocatalytic process for the single-pass conversion of CO 2 to butene using only simulated solar irradiation as the energetic input. The two-step process involves electrochemical CO 2 reduction (CO 2 R) to ethylene followed by ethylene dimerization to butene. We assessed two unassisted electrochemical setups to concentrate ethylene in the CO 2 R reactor, achieving concentrations up to 5.4 vol.% with 1.8% average solar-to-ethylene conversion and 5.6% average CO 2 -to-ethylene single-pass conversion under 1-sun illumination. When passed through the photothermocatalytic ethylene oligomerization reactor, we generated 600 ppm of butene under 3-sun illumination. Through analysis of this process, we identified that the presence of H 2 , CO, and H 2 O leads to rapid deactivation of the Ni-based ethylene oligomerization catalyst.

14 SOLAR ENERGY↗

DOE OSTI2024

Modeling Diurnal and Annual Ethylene Generation from Solar-Driven Electrochemical CO 2 Reduction Devices

Integrated solar fuels devices for CO 2 reduction (CO 2 R) are a promising technology class towards achieving net-negative carbon emissions. Designing integrated CO 2 R solar fuels devices requires careful co-design of electrochemical and photovoltaic components as well as consideration of the diurnal and seasonal effects of solar irradiance, temperature, and other meteorological factors expected for ‘on-sun’ deployment. Here, using a photovoltaic-electrochemical (PV-EC) platform, we developed a temperature and potential-dependent diurnal and annual model using experimental CO 2 R performance of Cu-based electrocatalysts, local meteorological data from the National Solar Radiation Database (NSRD), and modeled performance of commercial c-Si PVs. We simulated diurnal product outputs with and without the effects of ambient temperature to determine gaseous product temperature sensitivity. From these outputs, we observed seasonal variation in gaseous product generation, with up to two-fold increases in ethylene productivity between the Winter and Summer, analyzed the consequences of dynamic cloud coverage, and identified periods where device cooling/heating mechanisms could be implemented to maximize ethylene generation. Finally, we modeled the annual ethylene generation for a scaled 1 MW solar farm at three different locations (Beijing, CN; Sydney, AUS; Barstow, CA) to determine the consequences of local meteorological climates on PV-EC CO 2 R product output, recording a maximum ethylene output of 18.5 tonne/yr at Barstow. Overall, this model presents a critical tool for streamlining the translation of experimental solar-driven electrochemical research to real-world implementation.

Yap, Kyra M. K.↗

DOE OSTI2024

Absolute band-edge energies are over-emphasized in the design of photoelectrochemical materials

The absolute band-edge potentials of semiconductors, i.e., the conduction-band minimum, valence-band maximum, and their relative positions to solution redox potentials, are often invoked as design principles for photoelectrochemical (PEC) devices, especially for particulate photocatalysts. Here we show that reliance on these criteria is not necessary and limits the exploration of materials that will advance the fields of photoelectrochemistry, photochemistry, and photocatalysis. We discuss how i) band-edge energies are not singular parameters and instead shift with pH, electrolyte type, and surface chemistry; ii) the free energy of electrons and holes in comparison to that of solution redox couples dictates overall reaction spontaneity and thus reactivity; and iii) favorable charge-transfer kinetics can occur even when the relevant electrolyte redox potential(s) appear ‘outside’ the bandgap, enabled by the inversion or accumulation of electronic charge at the semiconductor surface. As a result, this discussion informs design principles for photocatalyst systems engineering for both one-electron redox reactions as well as for more complex multi-electron transfer reactions (e.g, H 2 evolution, H 2 O oxidation, CO 2 reduction).

14 SOLAR ENERGY↗

DOE OSTI2024

Alkali cation-induced cathodic corrosion in Cu electrocatalysts

The reconstruction of Cu catalysts during electrochemical reduction of CO 2 is a widely known but poorly understood phenomenon. Herein, we examine the structural evolution of Cu nanocubes under CO 2 reduction reaction and its relevant reaction conditions using identical location transmission electron microscopy, cyclic voltammetry, in situ X-ray absorption fine structure spectroscopy and ab initio molecular dynamics simulation. Our results suggest that Cu catalysts reconstruct via a hitherto unexplored yet critical pathway - alkali cation-induced cathodic corrosion, when the electrode potential is more negative than an onset value (e.g., –0.4 V RHE when using 0.1 M KHCO 3 ). Having alkali cations in the electrolyte is critical for such a process. Consequently, Cu catalysts will inevitably undergo surface reconstructions during a typical process of CO 2 reduction reaction, resulting in dynamic catalyst morphologies. While having these reconstructions does not necessarily preclude stable electrocatalytic reactions, they will indeed prohibit long-term selectivity and activity enhancement by controlling the morphology of Cu pre-catalysts. Alternatively, by operating Cu catalysts at less negative potentials in the CO electrochemical reduction, we show that Cu nanocubes can provide a much more stable selectivity advantage over spherical Cu nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Sub-volt conversion of activated biochar and water for H 2 production near equilibrium via biochar-assisted water electrolysis

Sluggish water oxidation reactions limit water electrolysis for H 2 production, which can be alleviated by the use of carbon-based ma- terials like agricultural wastes as reducing agents. Biochar from such biomass can reduce equilibrium cell potentials at standard condi- tions from 1.23 V to 0.21 V by avoiding direct water splitting at the anode. However, some challenges hinder biochar oxidation, including poor biochar binding, electrode caking, and surface passivation. We find that enhanced C/O ratio, crystallinity, and negative zeta potential improve biochar oxidation kinetics at mod- erate temperatures. Smaller particle sizes and better mixing pre- vent electrode caking, enhancing biochar stability. Here, we report sub-volt biochar-coupled H 2 production, often referred to as a bio- char-assisted water electrolysis (BAWE), yielding 250 mA/g cat H 2 current at 100% Faradaic efficiency. Over 1 mA current was observed at a near-equilibrium cell potential of 0.2 V cell potential. Using a single-junction solar cell-powered BAWE, 15 mA H 2 is generated at 1 Sun, resulting in 4.8% solar-to-hydrogen efficiency, equivalent to 35% when the energy of H 2 relative to H 2 O (without biochar) is assumed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Modeling diurnal and annual ethylene generation from solar-driven electrochemical CO 2 reduction devices

Integrated solar fuels devices for CO 2 reduction (CO 2 R) are a promising technology class towards reducing carbon emissions. Designing integrated CO 2 R solar fuels devices requires careful co-design of electrochemical and photovoltaic components as well as consideration of the diurnal and seasonal effects of solar irradiance, temperature, and other meteorological factors expected for ‘on-sun’ deployment. Using a photovoltaic-electrochemical (PV-EC) platform, we developed a temperature and potential-dependent diurnal and annual model using experimentally-determined CO 2 R performance of Cu-based electrocatalysts, local meteorological data from the National Solar Radiation Database (NSRD), and modeled performance of commercial c-Si PVs. Here we simulated gaseous diurnal product outputs with and without the effects of ambient temperature. From these outputs, we observed seasonal variation in gaseous product generation, with up to two-fold increases in ethylene productivity between the Winter and Summer, analyzed the consequences of dynamic cloud coverage, and identified periods where device cooling/heating mechanisms could be implemented to maximize ethylene generation. Finally, we modeled the annual ethylene generation for a scaled 1 MW solar farm at three different locations (Beijing, CN; Sydney, AUS; Barstow, CA) to determine the consequences of local meteorological climates on PV-EC CO 2 R product output, recording a maximum ethylene output of 18.5 tonne per year at Barstow. Overall, this model presents a critical tool for streamlining the translation of experimental solar-driven electrochemical research to real-world implementation.

14 SOLAR ENERGY↗

DOE OSTI2024

Multi-scale physics of bipolar membranes in electrochemical processes

Bipolar membranes (BPMs) enable control of ion concentrations and fluxes in electrochemical cells suitable for a wide range of applications. Here, in this work, we present the multi-scale physics of BPMs in an electrochemical engineering context and articulate design principles to drive the development of advanced BPMs. The chemistry, structure, and physics of BPMs are illustrated and related to the thermodynamics, transport phenomena, and chemical kinetics that dictate ion and species fluxes and selectivity. These interactions give rise to emergent structure–property–performance relationships that yield design criteria for BPMs that achieve high permselectivity, durability, and voltaic efficiency. The resulting performance trade-offs for BPMs are presented in the context of emerging applications in energy conversion or storage, and environmental remediation. By connecting the fundamental physical phenomena in BPMs to device-level performance and engineering, we aim to facilitate the development of next-generation BPMs for sustainable electrochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Protocol for assembling and operating bipolar membrane water electrolyzers

Renewable energy-driven bipolar membrane water electrolyzers (BPMWEs) are a promising technology for sustainable production of hydrogen from seawater and other impure water sources. Here, we present a protocol for assembling BPMWEs and operating them in a range of water feedstocks, including ultra-pure deionized water and seawater. We describe steps for membrane electrode assembly preparation, electrolyzer assembly, and electrochemical evaluation. For complete details on the use and execution of this protocol, please refer to Marin et al. (2023).

Rios Amador, Isabela↗

DOE OSTI2023

Calcium-mediated nitrogen reduction for electrochemical ammonia synthesis

Ammonia (NH 3 ) is a key commodity chemical for the agricultural, textile and pharmaceutical industries, but its production via the Haber–Bosch process is carbon-intensive and centralized. Alternatively, an electrochemical method could enable decentralized, ambient NH 3 production that can be paired with renewable energy. The first verified electrochemical method for NH 3 synthesis was a process mediated by lithium (Li) in organic electrolytes. So far, however, elements other than Li remain unexplored in this process for potential benefits in efficiency, reaction rates, device design, abundance and stability. In our demonstration of a Li-free system, we found that calcium can mediate the reduction of nitrogen for NH 3 synthesis. Here we verified the calcium-mediated process using a rigorous protocol and achieved an NH 3 Faradaic efficiency of 40 ± 2% using calcium tetrakis(hexafluoroisopropyloxy)borate (Ca[B(hfip) 4 ] 2 ) as the electrolyte. Our results offer the possibility of using abundant materials for the electrochemical production of NH 3 , a critical chemical precursor and promising energy vector

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗