Engineering Papers⌕ Search

Engineering topics

Nicholas, Austin K.

Publications and source records attributed to Nicholas, Austin K..

13 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Mars Sample Return mission concept status

This paper will provide an overview of current options and specific concepts for a potential Mars Sample Return (MSR) architecture being jointly studied by NASA and ESA. Overall objectives and mission options will be described, including the architecture’s constraints and notional timelines. The paper will highlight architecture-level trade studies, including specific elements and their status. The overall Sample Retrieval Lander (SRL) mission concept, including vehicle options will be described, including the Mars Ascent Vehicle (MAV), Sample Fetch Rover (being studied by ESA), Orbiting Sample container (OS), and tube transfer robotics systems. The concept and status of the Earth Return Orbiter (ERO) mission, being studied by ESA, and the Capture/Containment and Return System (CCRS) which would be the payload on the ERO, will be discussed.

Vijendran, Sanjay↗
NASA NTRS2019

Low-thrust trajectory Bacon plots for Mars mission design

The best way to understand a mission design trade space is by creating a good map of all the possibilities, and by knowing how to read it. Bacon plots, which are low-thrust analogs to porkchop plots, give insight into key parameters and sensitivities of possible transfers to Mars (or other destinations). They are mission and parameter specific, and can be created to represent single or multiple legs. This paper outlines the creation process and lessons learned in interpreting the results. An example is given on how bacon plots have been employed for complex mission-level optimization.

Olikara, Zubin↗
NASA NTRS2019

Simulaneous optimization of spacecraft and trajectory design for interplanetary missions utilizing solar electric propulsion

A major challenge in formulating interplanetary mission concepts utilizing electric propulsion is the large number of trajectory variables that must be considered (thrust profile, flyby options, launch vehicle delivery), all of which are affected by spacecraft design variables (power, mass, thruster, payload, staging). This is significantly more complex than traditional ballistic/chemical mission design and early concepts are often suboptimal as a result, potentially missing valuable options. This paper presents a novel tool (MORT) for simultaneously optimizing the spacecraft design alongside the trajectory given mission constraints and objectives, including example results relevant to the exploration of Mars.

Lock, Rob↗
NASA NTRS2019

Potential campaign architectures and mission design challenges for near-term international Mars Sample Return mission concepts

Mars Sample Return (MSR) continues to be a high priority in the planetary science community and a decades-long goal of international planetary exploration programs. Options for architectures and mission concepts are currently under study by NASA and ESA to find potential partnership opportunities to achieve MSR in the 2020s. The major elements of a potential MSR campaign have significant architectural flexibility and mission launch, arrival, and return options. The decision criteria often depend on mission design and functional allocations across many elements. This paper outlines the reference architecture and key trades among the campaign elements.

Olikara, Zubin↗
NASA NTRS2019

Mission analysis for a potential Mars Sample Return campaign in the 2020's

The Mars 2020 mission, currently under development by NASA, plans to acquire and cache carefully-selected rock and regolith samples from the surface of Mars for potential future return. NASA and ESA are jointly studying options for returning those samples to Earth with missions launching in the 2020s. This paper demonstrates a method for modeling the various campaign elements, synthesizing coordinated campaign timelines, and assuring trajectory feasibility in the presence of many constraints, and finally optimizing towards mission success. Options for complete sample return campaigns in multiple launch and arrival opportunities are explored and compared.

Huesing, Jakob↗
NASA NTRS2018

Methods for Passive Optical Detection and Relative Navigation for Rendezvous with a Non-Cooperative Object at Mars

Long-range passive optical detection of an orbiting inert sphere by a robotic Mars orbiter is investigated and trades are described in terms of detectability via reflected visible light in the presence of orbit uncertainty, gravitational perturbations, and camera electronics noise. A new approximate equation for signal-tonoise ratio (SNR) is developed to include most relevant camera imperfections, diffraction, and stray light from the Mars limb as relevant to this scenario. Using this method, a notional camera suite is designed to meet detection, navigation, and redundancy requirements for an example mission scenario. Results from a simulation tool demonstrate the long-range initial detection strategy in the presence of perturbations from various sources. Finally, navigation analysis shows that the information gathered using passive optical detection is sufficient to begin orbit matching.

Woolley, Ryan C.↗
NASA NTRS2017

Cargo Logistics for a Mars Base Using Solar Electric Propulsion

The current aim of NASA’s Journey to Mars is a stepwise approach towards landing humans on the Red Planet, culminating in a sustained presence. There are many recent studies on how this can be achieved in an evolvable and affordable manner. Most architectures begin with crewed missions to Phobos or Mars orbit in the mid-2030’s, progress toward short-stay missions on the surface, and then culminate with regular, long-stay missions at a permanent outpost in the 2040’s. A common factor of these architectures is that many robotic launches are required in order to support the crew by prepositioning mission elements and other needed supplies. In this paper, the use of 150 kW reusable Solar Electric Propulsion (SEP) tugs as a means to deliver elements both to orbit and the surface is studied. The SEP tugs make use of technology currently being developed for the proposed Asteroid Redirect Robotic Mission (ARRM). They would also be used to deliver food and supplies to sustain the crews similar to resupply missions for the International Space Station. These SEP tugs would cycle (with loitering) between staging orbits in cislunar space and Mars orbit.

Nicholas, Austin K.↗
NASA NTRS2015

SEP Mission Design Space for Mars Orbiters

The advancement of solar-electric propulsion (SEP) technologies and larger, light-weight solar arrays offer a tremendous advantage to Mars orbiters in terms of both mass and timeline flexibility. These advantages are multiplied for round-trip orbiters (e.g. potential Mars sample return) where a large total Delta V would be required. In this paper we investigate the mission design characteristics of mission concepts utilizing various combinations and types of SEP thrusters, solar arrays, launch vehicles, launch dates, arrival dates, etc. SEP allows for greater than 50% more mass delivered and launch windows of months to years. We also present the SEP analog to the ballistic Porkchop plot - the "Bacon" plot.

Woolley, Ryan C.↗
NASA NTRS2014

Round-Trip Solar Electric Propulsion Missions for Mars Sample Return

Mars Sample Return (MSR) missions could benefit from the high specific impulse of Solar Electric Propulsion (SEP) to achieve lower launch masses than with chemical propulsion. SEP presents formulation challenges due to the coupled nature of launch vehicle performance, propulsion system, power system, and mission timeline. This paper describes a SEP orbiter-sizing tool, which models spacecraft mass & timeline in conjunction with low thrust round-trip Earth-Mars trajectories, and presents selected concept designs. A variety of system designs are possible for SEP MSR orbiters, with large dry mass allocations, similar round-trip durations to chemical orbiters, and reduced design variability between opportunities.

Solar Electric Propulsion↗