Engineering Papers⌕ Search

Engineering topics

Ni, George

Publications and source records attributed to Ni, George.

Methods, apparatus and systems for generating and superheating vapor under sunlight

A solar vapor generator includes an absorber to absorb sunlight and an emitter, in thermal communication with the absorber, to radiatively evaporate a liquid under less than 1 sun illumination and without pressurization. The emitter is physically separated from the liquid, substantially reducing fouling of the emitter. The absorber and the emitter may also be heated to temperatures higher than the boiling point of the liquid and may thus may be used to further superheat the vapor. Solar vapor generation can provide the basis for many sustainable desalination, sanitization, and process heating technologies.

Chen, Gang↗

Localized solar collectors

A localized heating structure includes a spectrally-selective solar absorber, that absorbs incident solar radiation and reflects at wavelengths longer than 2 μm, with an underlying heat-spreading layer having a thermal conductivity equal to or greater than 50 W/(mK), a thermally insulating layer, adjacent to the spectrally-selective solar absorber, having a thermal conductivity of less than 0.1 W/(mK), one or more evaporation openings through the spectrally-selective solar absorber and the thermally insulating layer, and an evaporation wick, disposed in one or more of the evaporation openings in the thermally insulating layer, that contacts liquid and allows the liquid to be transported from a location beneath the thermally insulating layer through to the spectrally-selective solar absorber in order to generate vapor from the liquid. The thermally insulating layer is configured to have a density less than the liquid so that the localized heating structure is able to float on the liquid.

Ni, George↗

Solar-driven interfacial evaporation

As a ubiquitous solar-thermal energy conversion process, solar-driven evaporation has attracted tremendous research attention owing to its high conversion efficiency of solar energy and transformative industrial potential. In recent years, solar-driven interfacial evaporation by localization of solar-thermal energy conversion to the air/liquid interface has been proposed as a promising alternative to conventional bulk heating-based evaporation, potentially reducing thermal losses and improving energy conversion efficiency. In this Review, we discuss the development of the key components for achieving high-performance evaporation, including solar absorbers, evaporation structures, thermal insulators and thermal concentrators, and discuss how they improve the performance of the solar-driven interfacial evaporation system. We describe the possibilities for applying this efficient solar-driven interfacial evaporation process for energy conversion applications. The exciting opportunities and challenges in both fundamental research and practical implementation of the solar-driven interfacial evaporation process are also discussed.

charge transport↗

Engineering a Full Gamut of Structural Colors in All-Dielectric Mesoporous Network Metamaterials

Structural colors are a result of the scattering of certain frequencies of the incident light on micro- or nanoscale features in a material. This is a quite different phenomenon from that of colors produced by absorption of different frequencies of the visible spectrum by pigments or dyes, which is the most common way of coloring used in our daily life. However, structural colors are more robust and can be engineered to span most of the visible spectrum without changing the base material, only its internal structure. They are abundant in nature, with examples as colorful as beetle shells and butterfly wings, but there are few ways of preparing them for large-scale commercial applications for real-world uses. In this work, we present a technique to create a full gamut of structural colors based on a low-cost, robust, and scalable fabrication of periodic network structures in porous alumina as well as the strategy to theoretically predict and engineer different colors on demand. We experimentally demonstrate mesoporous network metamaterial structures with engineered colors spanning the whole optical spectrum and discuss their applications in sensing, environmental monitoring, biomimetic tissues engineering, etc.

36 MATERIALS SCIENCE↗

Synthesis and optical characterization of carbon nanotube arrays

Highlights: • Controlling metallicity and vertical alignment of CNT forest by changing hydrogen catalyst annealing time and growth pressure. • Verifying metallicity using Raman spectroscopy of top CNT layer. • Optical characterization of CNT forest using UV–vis–NIR spectrophotometer. - Abstract: Catalyst annealing time and growth pressure play a crucial role in the chiral selective and high-efficiency growth of single-walled carbon nanotubes (SWCNTs) during low pressure chemical vapor deposition (LPCVD). We achieved a high growth rates for SWCNTs and a change the chiral distribution towards metallic (n, m) increasing the catalyst annealing time in hydrogen. A strong correlation is revealed between the catalyst annealing time at lower growth pressures and the shape of the G band, which indicates the metallic or semiconducting nature of the SWCNT and predict the chirality distribution. Under a 15 min annealing time and 10 mbar of growth pressure, the bottom of the G band is broadened with a sharp G{sup −} peak, and the G-band exhibited asymmetrical Breit–Wigner–Fano (BWF) shape. In addition, the growth of SWCNTs with smaller diameters and rich in metallic character is confirmed by the shift of the G-band to a smaller Raman frequency. Homogeneity and vertical alignment of as-grown SWCNT arrays are optically studied using UV/vis/NIR Spectrophotometer. Wavelength-independent and low reflectance resulted from the growth of uniform arrays of SWCNTs. Because of their tunable electronic and optical properties, selective growth of SWCNTs promises great application potential, particularly in electronics and solar industries.

36 MATERIALS SCIENCE↗

Enhancement of thermoelectric figure-of-merit by resonant states of aluminium doping in lead selenide

In this study, by adding aluminium (Al) into lead selenide (PbSe), we successfully prepared n-type PbSe thermoelectric materials with a figure-of-merit (ZT) of 1.3 at 850 K. Such a high ZT is achieved by a combination of high Seebeck coefficient caused by very possibly the resonant states in the conduction band created by Al dopant and low thermal conductivity from nanosized phonon scattering centers.

36 MATERIALS SCIENCE↗