Engineering topics
Nguyen, Luan
Publications and source records attributed to Nguyen, Luan.
Interactions of gaseous molecules with X-ray photons and photoelectrons in AP-XPS study of solid surface in gas phase
Exploration of interactions between X-ray photons and gaseous molecules and between photoelectrons and molecules in the gas phase.
Studies of surface of metal nanoparticles in a flowing liquid with XPS
Surface of metal catalyst nanoparticles in a flowing liquid was characterized with XPS.
Catalysis on Singly Dispersed Rh Atoms Anchored on an Inert Support
A metal catalyst supported on an inert substrate could consist of both metal nanoparticles and singly dispersed metal atoms. Whether these singly dispersed metal atoms are active and how different their catalytic mechanism could be in contrast to a supported metal catalyst are fundamentally important for understanding catalysis on a supported metal or oxide. In this study, by taking reduction of NO with CO on singly dispersed Rh atoms anchored on an inert support SiO 2 as a probe system (Rh 1 /SiO 2 ), we demonstrated how singly dispersed metal atoms on an inert support could perform a complex multi-step catalytic cycle through a mechanism distinctly different from that for a supported metal nanoparticle with continuously packed metal sites. These singly dispersed Rh 1 atoms anchored on SiO 2 are active in reducing nitric oxide with carbon monoxide through two reaction pathways that are different from those of Rh nanoparticles. In situ IR studies show that a CO molecule and a NO molecule coadsorb on a singly dispersed Rh atom, Rh 1 anchored on SiO 2 , and couple to form an N atom to adsorb on the surface and a CO 2 molecule to desorb. The adsorbed N atom further couples with another CO molecule in the gas phase to form an intermediate -NCO on Rh 1 ; this intermediate can directly couple with an NO molecule adsorbed on the same Rh1 to form N 2 and CO 2 . In another pathway, the adsorbed N atom can couple with a coadsorbed NO on the same Rh 1 to form N 2 O; N 2 O further reacts with adsorbed CO on the same Rh 1 to form N 2 and CO 2 through a high activation barrier that can be overcome at a high temperature. Our studies show that the singly dispersed metal atoms on an inert support have great potential to perform selective transformation of chemicals. Lastly, the confirmed catalysis with a singly dispersed Rh 1 on SiO 2 through a mechanism different from a metal nanoparticle supported on the same substrate suggests the significance of taking the single-atom catalysis (SAC) into fundamental studies of catalysis of a supported metal catalyst, since metal nanoparticles and singly dispersed metal atoms likely coexist on the inert support of many supported catalysts.
Integrated In Situ Characterization of a Molten Salt Catalyst Surface: Evidence of Sodium Peroxide and Hydroxyl Radical Formation
Sodium-based catalysts (such as Na 2 WO 4 ) were proposed to selectively catalyze OH radical formation from H 2 O and O 2 at high temperatures. This reaction may proceed on molten salt state surfaces owing to the lower melting point of the used Na salts compared to the reaction temperature. This study provides direct evidence of the molten salt state of Na 2 WO 4 , which can form OH radicals, using in situ techniques including X-ray diffraction (XRD), scanning transmission electron microscopy (STEM), laser induced fluorescence (LIF) spectrometry, and ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). As a result, Na 2 O 2 species, which were hypothesized to be responsible for the formation of OH radicals, have been identified on the outer surfaces at temperatures of ≥800°C, and these species are useful for various gasphase hydrocarbon reactions, including the selective transformation of methane to ethane.
Elucidating the Copper–Hägg Iron Carbide Synergistic Interactions for Selective CO Hydrogenation to Higher Alcohols
CO hydrogenation to higher alcohols (C 2 +OH) provides a promising route to convert coal, natural gas, shale gas, and biomass feedstocks into value-added chemicals and transportation fuels. However, the development of nonprecious metal catalysts with satisfactory activity and well-defined selectivity toward C 2 +OH remains challenging and impedes the commercialization of this process. Here, we show that the synergistic geometric and electronic interactions dictate the activity of Cu-0-chi-Fe 5 C 2 binary catalysts for selective CO hydrogenation to C 2 +OH, outperforming silica-supported precious Rh-based catalysts, by using a combination of experimental evidence from bulk, surface-sensitive, and imaging techniques collected on real and high-performance Cu-Fe binary catalytic systems coupled with density functional theory calculations. The closer is the d-band center to the Fermi level of Cu-0-chi-Fe 5 C 2 (510) surface than those of chi-Fe 5 C 2 (510) and Rh(111) surface, and the electron-rich interface of Cu-0-chi-Fe 5 C 2 (510) due to the delocalized electron transfer from Cu-0 atoms, facilitates CO activation and CO insertion into alkyl species to C-2-oxygenates at the interface of Cu-0-chi-Fe 5 C 2 (510) and thus enhances C 2 H 5 OH selectivity. Starting from the CHCO intermediate, the proposed reaction pathway for CO hydrogenation to C 2 H 5 OH on Cu-0-chi-Fe 5 C 2 (510) is CHCO + (H) -> CH 2 CO + (H) -> CH 3 CO + (H) -> CH 3 CHO + (H) -> CH 3 CH 2 O + (H) -> C 2 H 5 OH. This study may guide the rational design of high-performance binary catalysts made from earth-abundant metals with synergistic interactions for tuning selectivity.
Direct Neutron Spectroscopy Observation of Cerium Hydride Species on a Cerium Oxide Catalyst
Ceria has recently shown intriguing hydrogenation reactivity in catalyzing alkyne selectively to alkenes. However, the mechanism of the hydrogenation reaction, especially the activation of H 2 , remains experimentally elusive. In this paper, we report the first direct spectroscopy evidence for the presence of both surface and bulk Ce–H species upon H 2 dissociation over ceria via in situ inelastic neutron scattering spectroscopy. Combined with in situ ambient-pressure X-ray photoelectron spectroscopy, IR, and Raman spectroscopic studies, the results together point to a heterolytic dissociation mechanism of H 2 over ceria, leading to either homolytic products (surface OHs) on a close-to-stoichiometric ceria surface or heterolytic products (Ce–H and OH) with the presence of induced oxygen vacancies in ceria. Finally, the finding of this work has significant implications for understanding catalysis by ceria in both hydrogenation and redox reactions where hydrogen is involved.
Oxidation of Cyclohexene Catalyzed by Nanoporous Au(Ag) in Liquid Phase
Nanoporous gold with minor silver content has been identified as a new type of gold based catalyst for selective oxidation of cyclohexene with molecular oxygen in liquid. By oxidation of the leached nanoporous gold foils in ozone, the minor silver content was oxidized in this paper to form silver oxide nanoclusters on the surface of nanoporous gold. With further treatment in methanol, the surface silver oxide was reduced and surface alloy was formed on gold ligaments. Both nanoporous gold treated with ozone only and the one with ozone and then methanol are very active for selective oxidation of cyclohexene with molecular oxygen in liquid of cyclohexene with a turn-over-frequency (TOF) of 0.55–0.99 molecules per surface Au atom per second under a solvent-free and initiator- free condition. The total selectivity for production of 2-cyclohexene-1-one, 2-cyclohexene-1-ol, and cyclohexene oxide was increased from 57.5 % to 80.8 % by an additional treatment of nanoporous gold in methanol after activation in zone. Finally, the correlation of catalytic selectivity for the production of the three products and corresponding surface chemistry of ligament suggests that (1) the formed Au–Ag alloy surface is favorable for the formation of 2-cyclohexen-1-one, 2-cyclohexene-1-ol, and cyclohexene oxide and (2) the surface silver oxide is favorable for the production of cyclohexenyl hydroperoxide.
Tuning Catalytic Performance through a Single or Sequential Post-Synthesis Reaction(s) in a Gas Phase
Catalytic performance of a bimetallic catalyst is determined by geometric structure and electronic state of the surface or even the near-surface region of the catalyst. Here we report that single and sequential postsynthesis reactions of an as-synthesized bimetallic nanoparticle catalyst in one or more gas phases can tailor surface chemistry and structure of the catalyst in a gas phase, by which catalytic performance of this bimetallic catalyst can be tuned. Pt–Cu regular nanocube (Pt–Cu RNC) and concave nanocube (Pt–Cu CNC) are chosen as models of bimetallic catalysts. Surface chemistry and catalyst structure under different reaction conditions and during catalysis were explored in gas phase of one or two reactants with ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and extended X-ray absorption fine structure (EXAFS) spectroscopy. The newly formed surface structures of Pt–Cu RNC and Pt–Cu CNC catalysts strongly depend on the reactive gas(es) used in the postsynthesis reaction(s). A reaction of Pt–Cu RNC-as synthesized with H2 at 200 °C generates a near-surface alloy consisting of a Pt skin layer, a Cu-rich subsurface, and a Pt-rich deep layer. This near-surface alloy of Pt–Cu RNC-as synthesized-H2 exhibits a much higher catalytic activity in CO oxidation in terms of a low activation barrier of 39 ± 4 kJ/mol in contrast to 128 ± 7 kJ/mol of Pt–Cu RNC-as synthesized. Here the significant decrease of activation barrier demonstrates a method to tune catalytic performances of as-synthesized bimetallic catalysts. A further reaction of Pt–Cu RNC-as synthesized-H2 with CO forms a Pt–Cu alloy surface, which exhibits quite different catalytic performance in CO oxidation. It suggests the capability of generating a different surface by using another gas. The capability of tuning surface chemistry and structure of bimetallic catalysts was also demonstrated in restructuring of Pt–Cu CNC-as synthesized.
Low-Temperature Transformation of Methane to Methanol on Pd 1 O 4 Single Sites Anchored on the Internal Surface of Microporous Silicate
Direct conversion of methane to chemical feedstocks such as methanol under mild conditions is a challenging but ideal solution for utilization of methane. Pd 1 O 4 single-sites anchored on the internal surface of micropores of a microporous silicate exhibit high selectivity and activity in transforming CH 4 to CH 3 OH at 50–95 °C in aqueous phase through partial oxidation of CH 4 with H 2 O 2 . The selectivity for methanol production remains at 86.4 %, while the activity for methanol production at 95 °C is about 2.78 molecules per Pd 1 O 4 site per second when 2.0 wt % CuO is used as a co-catalyst with the Pd 1 O 4 @ZSM-5. Thermodynamic calculations suggest that the reaction toward methanol production is highly favorable compared to formation of a byproduct, methyl peroxide.
Development of a reaction cell for in-situ/operando studies of surface of a catalyst under a reaction condition and during catalysis
Tracking surface chemistry of a catalyst during catalysis is significant for fundamental understanding of catalytic performance of the catalyst since it allows for establishing an intrinsic correlation between surface chemistry of a catalyst at its working status and its corresponding catalytic performance. Ambient pressure X-ray photoelectron spectroscopy can be used for in-situ studies of surfaces of different materials or devices in a gas. To simulate the gaseous environment of a catalyst in a fixed-bed a flowing gaseous environment of reactants around the catalyst is necessary. Here, we report the development of a new flowing reaction cell for simulating in-situ study of a catalyst surface under a reaction condition in gas of one reactant or during catalysis in a mixture of reactants of a catalytic reaction. The homemade reaction cell is installed in a high vacuum (HV) or ultrahigh vacuum (UHV) environment of a chamber. The flowing gas in the reaction cell is separated from the HV or UHV environment through well sealings at three interfaces between the reaction cell and X-ray window, sample door and aperture of front cone of an energy analyzer. Catalyst in the cell is heated through infrared laser beam introduced through a fiber optics interfaced with the reaction cell through a homemade feedthrough. The highly localized heating on the sample holder and Au-passivated internal surface of the reaction cell effectively minimizes any unwanted reactions potentially catalyzed by the reaction cell. The incorporated laser heating allows a fast heating and a high thermal stability of the sample at a high temperature. With this cell, a catalyst at 800 °C in a flowing gas can be tracked readily.
In situ studies of surface of NiFe 2 O 4 catalyst during complete oxidation of methane
Here, NiFe 2 O 4 with an inverse spinel structure exhibits high activity for a complete oxidation of methane at 400 °C–425 °C and a higher temperature. The surface of the catalyst and its adsorbates were well characterized with ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and in situ infrared spectroscopy (IR). In situ studies of the surface of NiFe 2 O 4 using AP-XPS suggest the formation of methoxy-like and formate-like intermediates at a temperature lower than 200 °C, supported by the observed vibrational signatures in in situ IR studies. Evolutions of C1s photoemission features and the nominal atomic ratios of C/(Ni + Fe) of the catalyst surface suggest that the formate-like intermediate is transformed to product molecules CO 2 and H 2 O in the temperature range of 250–300 °C. In situ studies suggest the formation of a spectator, – O lattice – CH 2 – O lattice –. It strongly bonds to surface through C–O bonds and cannot be activated even at 400 °C.
Understanding complete oxidation of methane on spinel oxides at a molecular level
It is crucial to develop a catalyst made of earth-abundant elements highly active for a complete oxidation of methane at a relatively low temperature. NiCo 2 O 4 consisting of earth-abundant elements which can completely oxidize methane in the temperature range of 350-550 °C. Being a cost-effective catalyst, NiCo 2 O 4 exhibits activity higher than precious-metal-based catalysts. Here we report that the higher catalytic activity at the relatively low temperature results from the integration of nickel cations, cobalt cations and surface lattice oxygen atoms/oxygen vacancies at the atomic scale. Finally, in situ studies of complete oxidation of methane on NiCo 2 O 4 and theoretical simulations show that methane dissociates to methyl on nickel cations and then couple with surface lattice oxygen atoms to form -CH 3 O with a following dehydrogenation to -CH 2 O; a following oxidative dehydrogenation forms CHO; CHO is transformed to product molecules through two different sub-pathways including dehydrogenation of OCHO and CO oxidation.