Engineering Papers⌕ Search

Engineering topics

Newman, Perry A.

Publications and source records attributed to Newman, Perry A..

29 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Recent advances in steady compressible aerodynamic sensitivity analysis

Sensitivity analysis methods are classified as belonging to either of the two broad categories: the discrete (quasi-analytical) approach and the continuous approach. The two approaches differ by the order in which discretization and differentiation of the governing equations and boundary conditions is undertaken. The discussion focuses on the discrete approach. Basic equations are presented, and the major difficulties are reviewed in some detail, as are the proposed solutions. Recent research activity concerned with the continuous approach is also discussed.

Taylor, Arthur C., III↗
NASA NTRS1992

An incremental strategy for calculating consistent discrete CFD sensitivity derivatives

In this preliminary study involving advanced computational fluid dynamic (CFD) codes, an incremental formulation, also known as the 'delta' or 'correction' form, is presented for solving the very large sparse systems of linear equations which are associated with aerodynamic sensitivity analysis. For typical problems in 2D, a direct solution method can be applied to these linear equations which are associated with aerodynamic sensitivity analysis. For typical problems in 2D, a direct solution method can be applied to these linear equations in either the standard or the incremental form, in which case the two are equivalent. Iterative methods appear to be needed for future 3D applications; however, because direct solver methods require much more computer memory than is currently available. Iterative methods for solving these equations in the standard form result in certain difficulties, such as ill-conditioning of the coefficient matrix, which can be overcome when these equations are cast in the incremental form; these and other benefits are discussed. The methodology is successfully implemented and tested in 2D using an upwind, cell-centered, finite volume formulation applied to the thin-layer Navier-Stokes equations. Results are presented for two laminar sample problems: (1) transonic flow through a double-throat nozzle; and (2) flow over an isolated airfoil.

Korivi, Vamshi Mohan↗
NASA NTRS1992

Multidisciplinary analysis and sensitivity derivatives for isolated helicopter rotors in hover

A new method is presented for using Navier-Stokes results in the system analysis and sensitivity derivative computations for a helicopter rotor in hover. The system coupling includes the interactions between rotor performance, rotor structural properties and aerodynamics (i.e., airfoil shape). Emphasis is placed on the use of high fidelity Navier-Stokes algorithms for the aerodynamic problem. The present formulation is chosen to reduce the number of sensitivity derivative equations and their dimensions as much as possible. In addition, an alternative adjoint formulation is presented which dramatically reduces the computational requirement for disciplines in which there may be a large number of design variables (e.g., aerodynamics). The theoretical method makes use of a combination of derivatives from each discipline; the computation of these derivatives has already been shown to be feasible. Sample computations for the aerodynamic-rotor model coupling and an associated sensitivity derivative are also presented.

Jones, Henry E.↗
NASA NTRS1991

Wall-interference assessment and corrections for transonic NACA 0012 airfoil data from various wind tunnels

A nonlinear, four wall, post-test wall interference assessment/correction (WIAC) code was developed for transonic airfoil data from solid wall wind tunnels with flexibly adaptable top and bottom walls. The WIAC code was applied over a broad range of test conditions to four sets of NACA 0012 airfoil data, from two different adaptive wall wind tunnels. The data include many test points for fully adapted walls, as well as numerous partially adapted and unadapted test points, which together represent many different model/tunnel configurations and possible wall interference effects. Small corrections to the measured Mach numbers and angles of attack were obtained from the WIAC code even for fully adapted data; these corrections generally improve the correlation among the various sets of airfoil data and simultaneously improve the correlation of the data with calculations for a 2-D, free air, Navier-Stokes code. The WIAC corrections for airfoil data taken in fully adapted wall test sections are shown to be significantly smaller than those for comparable airfoil data from straight, slotted wall test sections. This indicates, as expected, a lesser degree of wall interference in the adapted wall tunnels relative to the slotted wall tunnels. Application of the WIAC code to this data was, however, somewhat more difficult and time consuming than initially expected from similar previous experience with WIAC applications to slotted wall data.

Green, Lawrence L.↗
NASA NTRS1990

Evaluation of transonic wall interference assessment and correction for semi-span wing data

A newly developed transonic wall interference assessment and correction (WIAC) code is applied to transonic semispan wing data taken in the Lockheed-Georgia Compressible Flow Wind Tunnel (CFWT), in order to evaluate previous WIAC results and corrections. A current state-of-the-art Navier-Stokes free-air code is used as an independent check. Results are presented for Wing C at the transonic edge of its test data matrix in the CFWT. The results demonstrate the effects of wall porosity, Mach number, and angle-of-attack on the transonic wall interference correction.

Garriz, Javier A.↗
NASA NTRS1990

Limits of adaptation, residual interferences

Methods of determining linear residual wall interference appear to be well established theoretically; however they need to be validated, for example by comparative studies of test data on the same model in different adaptive-wall wind tunnels as well as in passive, ventilated-wall tunnels. The GARTEur CAST 7 and the CAST 10/DOA 2 investigations are excellent examples of such comparative studies. Results to date in both one-variable and two-variable methods for nonlinear wall interference indicate that a great deal more research and validation are required. The status in 2D flow is advanced over that in 3D flow as is the case generally with adaptive-wall development. Nevertheless, it is now well established that for transonic testing with extensive supercritical flow present, significant wall interference is likely to exist in conventional ventilated test sections. Consequently, residual correction procedures require further development hand-in-hand with further adaptive-wall development.

Mokry, Miroslav↗
NASA NTRS1989

Nonlinear transonic Wall-Interference Assessment/Correction (WIAC) procedures and application to cast-10 airfoil results from the NASA 0.3-m TCT 8- by 24-inch Slotted Wall Test Section (SWTS)

From the time that wind tunnel wall interference was recognized to be significant, researchers have been developing methods to alleviate or account for it. Despite the best effort so far, it appears that no method is available which completely eliminates the effects due to the wind tunnel walls. This report discusses procedures developed for slotted wall and adaptive wall test sections of the Langley 0.3-m Transonic Cryogenic Tunnel (TCT) to assess and correct for the residual interference by methods consistent with the transonic nature of the tests.

Gumbert, Clyde R.↗
NASA NTRS1988

Unsteady viscous-inviscid interaction procedures for transonic airfoils using Cartesian grids

A viscous-inviscid interaction procedure for transonic airfoils using an Euler/integral boundary layer formulation and Cartesian grids is presented. The approach is based on a time dependent formulation for both the integral boundary layer equations and the Euler equations. Effects of upstream history on the shear stress are modeled by a time dependent rate equation derived from the turbulent kinetic energy equation. Results are presented for two of the test cases reported by Cook et al. (1979) for the RAE 2822 supercritical airfoil and one of the cases reported by Harris (1981) for the NACA 0012 symmetric airfoil. In general, the results are in good agreement with experiment.

Fenno, Charles C., Jr.↗
NASA NTRS1987

Transonic wall interference assessment and corrections for airfoil data from the 0.3-meter TCT adaptive wall test section

The wall interference assessment/correction code presented is nonlinear, involves four walls, and is applicable to transonic airfoil data from wind tunnels with shaped, solid top and bottom walls. Attention is given to its application to data from the NASA 0.3-m Transonic Cryogenic Tunnel Adaptive Test Section, for two sizes of a NACA 0012 airfoil and to simulated data for an inviscid two-dimensional full-potential code. This study indicates that while adaptive wall wind tunnels significantly reduce some aspects of wall-interference effects (by comparison to straight solid and slotted wall wind tunnels), residual wall and other interference effects are present.

Green, Lawrence L.↗
NASA NTRS1986

Wind tunnel wall interference

About a decade ago, interest in alleviating wind tunnel wall interference was renewed by advances in computational aerodynamics, concepts of adaptive test section walls, and plans for high Reynolds number transonic test facilities. Selection of NASA Langley cryogenic concept for the National Transonic Facility (NTF) tended to focus the renewed wall interference efforts. A brief overview and current status of some Langley sponsored transonic wind tunnel wall interference research are presented. Included are continuing efforts in basic wall flow studies, wall interference assessment/correction procedures, and adaptive wall technology.

Newman, Perry A.↗