Engineering Papers⌕ Search

Engineering topics

Nelson, Eric Michael

Publications and source records attributed to Nelson, Eric Michael.

Fast BLT Code

This note discusses numerical algorithmic software design considerations and performance estimates for a fast BLT coupling code [1] written in c++. The aim of this code is to conduct faster parameter studies over line orientations. The original matlab code was written by Mike Rivera. Art Barnes ported this code to julia. I rewrote portions of the code for speed improvement, mainly to eliminate some redundant computation when calculating many line orientations. But this code is still far from optimal.

97 MATHEMATICS AND COMPUTING↗

First Trials with EMPHASIS

This report presents a series of three EMPHASIS trial problems we ran in March 2019, to demonstrate (1) that we can set up and run an SGEMP calculation, and (2) that we understand the nature and units of the input specifications and the output results. As these are the first EMPHASIS problems we have set up and run, we present some of the input decks and some of the lessons learned, to better orient a reader who might also be a new user of EMPHASIS. The EMPHASIS manual and the ITS manual are both good, but not complete enough to set up and run these applications. Substantial trial and error was still required. The trial problems are all based on an evacuated aluminum cylinder with 1 m inner radius and 1 m inner height. The cylinder is 100 mil thick. We take the axis of symmetry to be the z axis. The aluminum cylinder will be treated as perfectly conducting. The trial problems are (1) the cavity driven with a short pulse on an antenna at the center of the cavity, (2) the cavity driven by a prescribed short pulse of photocurrent injected normally from the bottom inside of the cylinder, and (3) the cavity driven by a prescribed short pulse of x-rays normally incident on the bottom outside of the cylinder.

42 ENGINEERING↗

EMP/GMD Phase 0 Report, A Review of EMP Hazard Environments and Impacts

The purpose of this study is to determine methods to analyze the hazard environments, impacts, and consequences of different sources of electromagnetic pulse (EMP), including nuclear electromagnetic pulse (NEMP) and geomagnetic disturbance (GMD) on the U.S. electric power infrastructures and to use those methods to determine EMP and GMD events of concern. The study will be carried out in four phases, each of which will provide higher levels of analytic fidelity that focuses on those EMP/GMD sources and events that create significant consequences, or whose consequences are sufficiently uncertain, to require more in-depth study. This study will leverage the best experimental data; device, equipment and system models; and simulation tools currently available. This study focuses primarily on the bulk electric system (BES) including large generating stations, large power transformers, the transmission network, and transmission system protection. Electrical distribution systems may potentially be included, if warranted, after consideration of the consequences for the bulk power system.

24 POWER TRANSMISSION AND DISTRIBUTION↗