Engineering Papers⌕ Search

Engineering topics

Neary, Vincent

Publications and source records attributed to Neary, Vincent.

At least 19 records

Design, Manufacture, and Testing of an Open-Source Benchmark Composite Hydrokinetic Turbine Blade: Preprint

In a trend toward clean energy alternatives, recent years have seen great strides in the marine energy space. Consequently, there is a pressing need for the design, development, and validation of novel energy harvesting technologies such as hydrokinetic devices, which capture kinetic energy from waves, tides, and currents. However, these devices span numerous concepts and designs that often lack solid benchmark research that can be freely referenced throughout their development. This work focuses on the design process of an open-source composite hydrokinetic turbine blade for a three-bladed marine turbine rotor assembly with a diameter of 2.5 m. The proposed blade consists of two structural composite skins that are bonded with an adhesive and filled with a foam core. This study also explores and contrasts the efficiency and resolution of low-fidelity rapid design methodologies and comprehensive high-fidelity approaches in the context of blade design, modeling, and analysis efforts, a key objective in this research. Blade hydrodynamic loads were modeled and applied to finite-element blade models to study deformations and potential failure. Ongoing and upcoming efforts will result in blade manufacture and structural testing at the National Renewable Energy Laboratory. In future work, multiple blades will be deployed at the Living Bridge site at the University of New Hampshire and will be compared to rigid aluminum blades of the same geometry, developed by Sandia National Laboratories. Ultimately, this research will lay foundational groundwork for researchers and manufacturers, establishing a baseline composite blade design that will serve as a benchmark in the development of future hydrokinetic turbine blades.

blade design↗

Assessing and mapping extreme wave height along the Gulf of Mexico coast

The effect of extreme waves on the coastal community includes inundation, loss of habitats, increasing shoreline erosion, and increasing risks to coastal infrastructures (e.g., ports, breakwaters, oil and gas platforms), important for supporting coastal resilience. The coastal communities along the US Gulf of Mexico are very low-lying, which makes the region particularly vulnerable to impacts of extreme waves generated by storm events. We propose assessing and mapping the risks from extreme waves for the Gulf of Mexico coast to support coastal resiliency planning. The risks will be assessed by computing n-year recurring wave height (e.g., 1, 5, 50, 100-year) using 32-year wave hindcast data and various extreme value analysis techniques including Peak- Over-Threshold and Annual Maxima method. The characteristics of the extreme waves, e.g., relations between the mean and extreme wave climates, directions associated with extreme waves, will be investigated. Hazard maps associated with extreme wave heights at different return periods will be generated to help planners identify potential risks and envision places that are less susceptible to future storm damage.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of performance metrics for the Wave Energy Prize converters tested at 1/20 th scale

It is expected that wave energy technologies will play a future role in providing clean renewable energy and diversifying energy portfolios; however, they are still at an early stage of development compared to other renewables, with varying archetypes proposed. As technologies advance toward commercialization, benchmarking is needed to quantify performance and costs. In this review, experimental datasets of Wave Energy Converter (WEC) devices tested in the final stage of the Wave Energy Prize (WEPrize) are compared and ranked using performance metrics found in the literature and those developed as WEPrize judging metrics at both U.S. and European representative wave climates. Because the WEPrize devices were tested under a set of identical sea states, which ranged from typical operating conditions to extreme storm events, consistent datasets were produced to facilitate comparison. This allows for a rare addition to the open literature on device performance trends. In addition, a reevaluation of trends established in previous power performance benchmarking studies is given. Trends found in previous studies were confirmed, except for the absorbed energy per characteristic mass metric, in which some of the WEPrize devices had higher values. Each of the metrics considered in this study has limitations due to the assumptions in simplifying the economic potential (e.g., power absorbed vs. a proxy to cost). In addition, each of these proxies is limited to the capital cost of a device, unlike the final metric used in the WEPrize, HPQ, which includes limited proxies of operational and capital expenditures, as well as array considerations. Recommendations are given for the use and potential modification of the metrics considered. Specifically, it is recommended that the ACE metric (from the WEPrize) be modified to more accurately include the other important system costs, such as the PTO and mooring, as well as installation, operation and maintenance costs.

16 TIDAL AND WAVE POWER↗

Development of Classification Systems for Wave Energy Resources and WEC Technologies

The submission includes wave resource classification reports, summary of classification statistics and regional trends, and data files with classification statistics for selected sites for extreme significant wave height. Two conference papers were uploaded that include classification metrics and geographic distributions for US coastal waters. These conference papers are: Neary, V.S., Coe, R.G., Cruz, J., Haas, K., Bacelli, G., Debruyne, Y., Ahn, S., Nevarez, V. (2017) Classification systems for wave energy resources and WEC technologies. Proceedings of 12th European Wave and Tidal Energy Conference Series (EWTEC 2017), Cork, Ireland, August 27-September 1, 2017 Haas, K., Ahn, S., Neary, V.S., and S. Bredin (2017) Development of a wave energy classification system. Proceedings of the 5th Marine Energy Technology Symposium (METS2017), Washington, D.C., May 1-3, 2017

16 TIDAL AND WAVE POWER↗