Engineering topics

Navratil, G. A. (ORCID:0000000229305196)

Publications and source records attributed to Navratil, G. A. (ORCID:0000000229305196).

4 records

DOE OSTI2025

Simulations of saturated MHD activity in the HBT-EP tokamak

The NIMROD code is used to perform simulations of MHD activity in the HBT-EP tokamak, including the effect of a resistive wall. Linear simulations are conducted to scan current and pressure profiles to establish self-consistent baseline equilibria that result in MHD instabilities with low error between experimental diagnostics and synthetic equivalents. A family of such equilibria is found with relatively peaked current and pressure profiles. Nonlinear simulations are performed using the optimal equilibrium, which is linearly unstable to a Resistive Wall Mode—stable in the ideal wall limit and with an Alfvénic growth rate in the no-wall limit. Using resistive wall boundary conditions, nonlinear Hall MHD simulations yield a rotating, saturated n=1 mode similar to the type observed experimentally in HBT-EP discharges. An n=1 mode around the q=2 surface mediates a localized axisymmetric perturbation that flattens the plasma current from a linearly unstable state to a 3D, rotating, stable state. During the saturated period, periodic changes in inter-diagnostic phase lag allow for qualitative estimations of effective, macroscopic transport coefficients used in MHD closure models and could be extended to model post-disruption MHD structure rotation after thermal quenches seen in HBT-EP.

Arnold, David A. (ORCID:0009000059535761)↗

DOE OSTI2024

Sawtooth suppression by flux pumping on HBT-EP

Abstract This study examines the mechanisms underlying sawtooth suppression in the High Beta Tokamak-Extended Pulse (HBT-EP) device. It is observed that strong-intensity sawtooth activities correlate with reduced-amplitude magnetohydrodynamics (MHD) edge modes which are identified as m / n = 3 / 1 external kink modes, while sawtooth suppression correlates with larger and saturated edge mode amplitudes. To further investigate these correlations, the plasma–wall coupling was manipulated by adjusting the positions of the conducting walls in HBT-EP. It was found that strong sawtooth events occur when the normalized wall radius b / a is within a critical value. This implies that the plasma–wall distance must be sufficiently small to ensure effective stabilization of the edge mode. Even slight differences in major radius result in significantly different discharge styles, categorized as ‘sawtoothing discharges’ and ‘sawtooth-suppressed discharges’ respectively. Through a series of mode structure analyses, we confirm the coexistence and coupling of the m / n = 1 / 1 helical core, m / n = 2 / 1 tearing mode, and m / n = 3 / 1 external kink mode during sawtooth-suppression, and that this coupling induces anomalous current broadening. Based on these findings, we conclude that sawtooth suppression in the HBT-EP tokamak is consistent with the process of magnetic flux pumping.

Physics↗

DOE OSTI2023

MHD mode tracking using high-speed cameras and deep learning

Abstract We present a new algorithm to track the amplitude and phase of rotating magnetohydrodynamic (MHD) modes in tokamak plasmas using high speed imaging cameras and deep learning. This algorithm uses a convolutional neural network (CNN) to predict the amplitudes of the n = 1 sine and cosine mode components using solely optical measurements from one or more cameras. The model was trained and tested on an experimental dataset consisting of camera frame images and magnetic-based mode measurements from the High Beta Tokamak - Extended Pulse (HBT-EP) device, and it outperformed other, more conventional, algorithms using identical image inputs. The effect of different input data streams on the accuracy of the model’s predictions is also explored, including using a temporal frame stack or images from two cameras viewing different toroidal regions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Simultaneous stabilization and control of the n = 1 and n = 2 resistive wall mode

Abstract DIII-D experiments demonstrate simultaneous stability measurements and control of resistive wall modes (RWMs) with toroidal mode numbers n = 1 and n = 2. RWMs with n > 1 are sometimes observed on DIII-D following the successful feedback stabilization of the n = 1 mode, motivating the development of multi- n control. A new model-based multi-mode feedback algorithm based on the VALEN physics code has been implemented on the DIII-D tokamak using a real-time GPU installed directly into the DIII-D plasma control system. In addition to stabilizing RWMs, the feedback seeks to control the stable plasma error field response, enabling compensation of the typically unaddressed DIII-D n = 2 error field component. Experiments recently demonstrated this algorithm’s ability to simultaneously control n = 1 and n = 2 perturbed fields for the first time in a tokamak, using reactor relevant external coils. Control was maintained for hundreds of wall-times above the n = 1 no-wall pressure limit and approaching the n = 1 and n = 2 ideal-wall limits. Furthermore, a rotating non-zero target was set for the feedback, allowing stability to be assessed by monitoring the rotating plasma response (PR) while maintaining control. This novel technique can be viewed as a closed-loop extension of active MHD spectroscopy, which has been used to validate stability models through comparisons of the PR to applied, open-loop perturbations. The closed-loop response measurements are consistent with open-loop MHD spectroscopy data over a wide range of β N approaching the n = 1 ideal-wall limit. These PR measurements were then fit to produce both VALEN and single-mode stability models. These models allowed for important plasma stability information to be determined and have been shown to agree with experimentally observed RWM growth rates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗