Engineering Papers⌕ Search

Engineering topics

Nakazono, Barry

Publications and source records attributed to Nakazono, Barry.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

VAMOS: A SmallSat Mission Concept for Remote Sensing of Venusian Seismic Activity from Orbit

The apparent youthfulness of Venus’ surface features, given a lack of plate tectonics, is very intriguing; however, longduration seismic observations are essentially impossible given the inhospitable surface of Venus. The Venus Airglow Measurements and Orbiter for Seismicity (VAMOS) mission concept uses the fact that the dense Venusian atmosphere conducts seismic vibrations from the surface to the airglow layer of the ionosphere, as observed on Earth. Similarly, atmospheric gravity waves have been observed by the European Venus Express’s Visible and Infrared Thermal Imaging Spectrometer (VIRTIS) instrument. Such observations would enable VAMOS to determine the crustal structure and ionospheric variability of Venus without approaching the surface or atmosphere. Equipped with an instrument of modest size and mass, the baseline VAMOS spacecraft is designed to fit within an ESPA Grande form factor and travel to Venus predominantly under its own power. Trade studies have been conducted to determine mission architecture robustness to launch and rideshare opportunities. The VAMOS mission concept was studied at JPL as part of the NASA Planetary Science Deep Space SmallSat Studies (PSDS3) program, which has not only produced a viable and exciting mission concept for a Venus SmallSat, but has also examined many issues facing the development of SmallSats for planetary exploration, such as SmallSat solar electric propulsion, autonomy, telecommunications, and resource management that can be applied to various inner solar system mission architectures.

Wallace, Mark↗
NASA NTRS2018

Propulsion System Options for a Potential Sample Return Lander (SRL) for Mars

A potential Mars Sample Return (MSR) campaign would be very unique challenge and has been the focus of technology development and planning efforts at JPL for several decades. The latest mission concept study focuses on a potential Sample Return Lander (SRL). The potential SRL examined several propulsion system approaches using monopropellant and bi-propellants for the terminal descent phase. A ranking was developed based on a mathematical optimization program. This paper focuses on the evaluations conducted for these system options. Historically, monopropellant and bi-propellant propulsion systems are usually considered for this application; this study took a fresh look at both conventional State of the Art (SOA) pressure fed monopropellant and bi-propellant propulsion system and augmenting the system using small Electrically Driven Pumps (EDP) for both these propulsion systems.

Preudhomme, Michael↗
NASA NTRS2018

Remote Sensing of Venusian Seismic Activity with a Small Spacecraft, the VAMOS Mission Concept

The Venusian atmosphere creates inhospitable temperature and pressure conditions for the surface of Venus, Earth’s twin planet, making in-situ measurements of any appreciable length difficult, expensive, and risky to obtain. Yet, because of the apparent youthfulness of Venus’ surface features, long-duration seismic observations are in high demand in order to determine and understand the dynamic processes taking place in lieu of plate tectonics. The Venus Airglow Measurements and Orbiter for Seismicity (VAMOS) mission concept would make use of the dense Venusian atmosphere as a medium to conduct seismic vibrations from the surface to the ionosphere. Here, the resulting atmospheric gravity waves and acoustic waves can be observed in the form of perturbations in airglow emissions, the basic principles for which have been demonstrated at Earth following a tsunami and at Venus with the European Venus Express’s Visible and Infrared Thermal Imaging Spectrometer (VIRTIS) instrument. In addition, these observations would enable VAMOS to determine the crustal structure and ionospheric variability of Venus without approaching the surface or atmosphere themselves. Equipped with an instrument of modest size and mass, the baseline VAMOS spacecraft is designed to fit within a SmallSat form factor and travel to Venus predominantly under its own power. VAMOS would enter into an orbit uniquely suited for the longduration, full-disk staring observations required for seismic readings. VAMOS’ journey would be enabled by modern solar electric propulsion technology and SmallSat avionics, which allow the spacecraft to reach Venus and autonomously filter observation data on board to detect Venus-quake events. Currently, trade studies are being conducted to determine mission architecture robustness to launch and rideshare opportunities. Key spacecraft challenges for VAMOS, just as with many SmallSat-based mission concepts, include thermal and power management, onboard processing capabilities, telecommunications throughput, and propulsion technology. The VAMOS mission concept is being studied at JPL as part of the NASA Planetary Science Deep Space SmallSat Studies (PSDS3) program, which will not only produce a viable and exciting mission concept for a Venus SmallSat, but will have the opportunity to examine many issues facing the development of SmallSats for planetary exploration. These include SmallSat solar electric propulsion, autonomy, telecommunications, and resource management that can be applied to various inner solar system mission architectures.

Helbert, Jörn↗
NASA NTRS2018

Space Storable Hybrid Rocket Technology Development

Hybrid rocket propulsion is gaining a great deal of interest for space storable and low temperature applications. Typical hybrid propellants have been shown to survive over a wide range of temperatures, minimizing the need for thermal control. This ability to survive in low temperature environments, coupled with their high performance (comparable to liquid bipropellants) and ability to restart has made them viable candidates for a variety of missions. A technology development program at the Jet Propulsion Laboratory over the last three years has focused on increasing the Technology Readiness Level (TRL) of hybrid rockets for a potential Mars Ascent Vehicle (MAV), In Situ Resource Utilization (ISRU) and Interplanetary SmallSat applications. Results of this technology development will be presented.

Vaughan, David↗
NASA NTRS2017

Technology Development and Design of an Electrically Driven Pump Fed (EDPF) Bi-Propellant Propulsion System for a Mars Ascent Vehicle (MAV)

A Mars Ascent Vehicle (MAV), as part of a potential Mars Sample Return (MSR) campaign, is a very unique challenge and has been the focus of technology development and design efforts at JPL (Jet Propulsion Lab.) for several decades. Recent trajectory studies, for the current range of notional MAV payloads (6-25 kilograms), evaluated performance using propulsion systems in the 2.5 kiloNewton to 4.5 kiloNewton (600-1000 pounds-force) thrust range. The study examined several propulsion system approaches - solid rocket, bi-propellant and hybrid propulsion systems - and developed a ranking based on several key figures of merit. This paper focuses on the evaluations conducted for the two bi-propellant propulsion system options considered for a potential MAV. Historically, bi-propellant propulsion systems have been considered for this application; this study took a fresh look at both a conventional State of the Art (SOA) pressure fed bi-propellant propulsion system and recent developments using small EDPF (Electrically-Driven Pump-Fed) bi-propellant propulsion systems.

Vaughan, David↗
NASA NTRS2017

Technology Development Plan and Preliminary Results for a Low Temperature Hybrid Mars Ascent Vehicle Concept

A hybrid propulsion system is being considered for a potential Mars Ascent Vehicle (MAV) based on its low temperature capability, ability to restart and high performance. The hybrid’s ability to survive in low and variable temperatures reduces power requirements and therefore system mass. Its ability to restart enables a Single Stage to Orbit (SSTO) design, minimizing system complexity. The hybrid’s high-performance (approximately 314 s Isp (I (sub sp)) (specific impulse in seconds) leads to a low total Gross Lift Off Mass (GLOM). These advantages set the hybrid design above the alternatives in the system studies completed at JPL (Jet Propulsion Laboratory). However, this solution has the lowest Technology Readiness Level (TRL) of the propulsion options. Therefore, a technology development effort has been undertaken to raise the TRL of the hybrid option and potentially enable its infusion into a future MAV or other in-space application. The culmination of this technology development is a flight demonstration, which is currently in the planning phases for launch in the early 2020’s.

Karp, Ashley↗
NASA NTRS2016

A Hybrid Mars Ascent Vehicle Design and FY 2016 Technology Development

Hybrid propulsion is currently favored for a Mars Ascent Vehicle (MAV) concept from a thermal performance and Gross Lift Off Mass standpoint. However, it is at a relatively low level of maturity compared to conventional propulsion options. Technology development efforts are currently underway to bring hybrid propulsion to a technology readiness level that would enable its infusion into potential Mars Sample Return. A new propellant combination is being considered for this design that has excellent low temperature behavior. Preliminary results of two ground test campaigns are currently underway to characterize this propellant combination. Hotfire testing is being carried out in parallel at Parabilis Space Technologies and Space Propulsion Group. In addition to the new propellant combination, several other technologies are being pursued for a potential hybrid MAV: hypergolic ignition and Liquid Injection Thrust Vector Control. Both of these technologies have been applied in other rocket applications, e.g. liquid propulsion commonly uses hypergolic propellants and missiles, such as the Minuteman II, have used LITVC in the past. Hypergolic ignition, when oxidizer and fuel combust upon contact, is highly desirable for multiple starts required by the MAV concept. Therefore, testing at Penn State and Purdue is being completed in this area. An updated hybrid propulsion system design for a Mars Ascent Vehicle concept based on JPL’s current understanding of potential Mars Sample Return requirements will be presented, leveraging the advances in technology development as well as updated understanding of how requirements may evolve.

Karp, Ashley C.↗
NASA NTRS2016

A Hybrid Mars Ascent Vehicle Concept for Low Temperature Storage and Operation

A hybrid propulsion system presents many advantages for a potential Mars Ascent Vehicle including high specific impulse, restartability and predicted excellent low temperature survivability. This additional benefit of low temperature storage and operation could substantially reduce the power required to maintain the system while on Mars and therefore decrease the total landed system mass required for the system. A new wax-based hybrid fuel has been formulated to realize these low temperature benefits, while still preserving high performance (Isp). The freezing point of the oxidizer can be selected to match the capabilities of the fuel, in this case Mixed Oxides of Nitrogen has been selected. The main disadvantages of this system are associated with the relatively low technology readiness level of the selected hybrid propulsion system for operation on Mars. However, technology development efforts are currently underway to advance the hybrid propulsion system to a level where it could potentially compete with heritage propulsion systems. An internal study completed at JPL in 2015 identified the single stage to orbit hybrid MAV as the lowest gross liftoff mass case from a large range of potential propulsion systems. Updates to this design are presented here.

Karp, Ashley Chandler↗
NASA NTRS2016

Technology Development and Design of a Hybrid Mars Ascent Vehicle Concept

Hybrid propulsion has been investigated as an enhancing technology for a Mars Ascent Vehicle (MAV) concept as part of potential Mars Sample Return (MSR) because of its high specific impulse, restartability, and the ability to operate and survive at extremely low temperatures. A new wax-based hybrid fuel formulation has been developed that could withstand the harsh and variable Mars environment protected solely by a minimal layer of passive insulation. This formulation could provide substantial energy savings for a notional lander and is critical for rover mobility. Preliminary thermal cycle testing has determined that the formulation can survive the expected temperature extremes and lifetime thermal testing is currently underway. A complete preliminary design using this new fuel formulation combined with a low temperature oxidizer such as Mixed Oxides of Nitrogen (MON30) is presented. Several key features associated with a complete hybrid MAV concept are investigated to determine their mission suitability (e.g. Thrust Vector Control and restartable ignition options). Potential challenges along a path towards developing such a system are outlined and future work is suggested as a means of technology maturation. The hybrid design presented here was the lowest Gross Lift Off Mass (GLOM) result of a 2015 Jet Propulsion Laboratory (JPL) led MAV concept study.

MSR↗
NASA NTRS2016

Technology Development and Design of a Hybrid Mars Ascent Vehicle Concept

Hybrid propulsion has been investigated as an enhancing technology for a Mars Ascent Vehicle (MAV) concept as part of potential Mars Sample Return (MSR) because of its high specific impulse, restartability, and the ability to operate and survive at extremely low temperatures. A new wax-based hybrid fuel formulation has been developed that could withstand the harsh and variable Mars environment protected solely by a minimal layer of passive insulation. This formulation could provide substantial energy savings for a notional lander and is critical for rover mobility. Preliminary thermal cycle testing has determined that the formulation can survive the expected temperature extremes and lifetime thermal testing is currently underway. A complete preliminary design using this new fuel formulation combined with a low temperature oxidizer such as Mixed Oxides of Nitrogen (MON30) is presented. Several key features associated with a complete hybrid MAV concept are investigated to determine their mission suitability (e.g. Thrust Vector Control and restartable ignition options). Potential challenges along a path towards developing such a system are outlined and future work is suggested as a means of technology maturation. The hybrid design presented here was the lowest Gross Lift Off Mass (GLOM) result of a 2015 Jet Propulsion Laboratory (JPL) led MAV concept study.

Karp, Ashley C.↗