Engineering topics

Nakata, Nori

Publications and source records attributed to Nakata, Nori.

6 records

DOE OSTI2026

A Nonergodic Ground-Motion Model for the San Francisco Bay Area for Small-Magnitude Earthquakes

ABSTRACT Recently, generative models have become a computationally efficient alternative to physics-based numerical simulations of ground motions. Neural networks can learn from existing ground-motion data to generate unobserved ground-motion data at new source and site locations. A key challenge with generative models is ensuring that predicted ground motions remain within a physically realistic range. For this purpose, we developed an empirical, nonergodic ground-motion model (GMM) for small-magnitude earthquakes in the San Francisco Bay area based on about 5000 recordings per component for Mw ≤ 4 earthquakes. The nonergodic GMM predicts spatially varying median source, site, and path effects for both the Fourier amplitude spectrum (FAS) and the Fourier phase derivative (a proxy for duration), as well as the corresponding epistemic uncertainty for each term. For FAS, our model shows above-average source and site effects in the western part of the region and below-average effects in the eastern part, with regional effects exhibiting larger spatial correlation lengths with increasing frequency. For duration, the source term is negligible for small-magnitude earthquakes, and the site term leads to site-specific variations up to 5 s. Path effects for FAS and duration depend on the source–site pair and are extrapolated spatially using recent methods for path-effect modeling. The aleatory variability of the within-site within-path residuals is similar to the variability found in previous studies for other regions. The nonergodic model provides two key contributions: first, median adjustment terms that are transferable to larger magnitude earthquakes, further reducing aleatory variability in probabilistic seismic hazard analysis; second, region-specific criteria for validating machine learning-based ground-motion generators to evaluate whether synthetic ground motions exhibit physically realistic source, site, and path effects.

Lacour, Maxime↗

DOE OSTI2025

Importance of Considering Near-Surface Attenuation in Earthquake Source Parameter Estimation: Insights from Kappa at a Dense Array in Oklahoma

ABSTRACT Separating earthquake source spectra from propagation effects is challenging. The propagation effect contains a site-dependent term related to the high attenuation of shallow sediments. Neglecting the site-dependent attenuation can cause large biases and scattering in the corner-frequency (fc) estimates, resulting in significant stress-drop deviations. In this study, we investigate shallow attenuation at the LArge-n Seismic Survey in Oklahoma (LASSO) and site-related biases and scattering in source parameter measurements due to simplified attenuation models. We measure the high-frequency spectral decay parameter kappa on the vertical acceleration spectra of regional earthquakes (125 km away). The site-dependent kappa (κ0,acc) suggests that attenuation increases rapidly at shallow depth and is highly site-dependent. 10%–75% of the attenuation is site-dependent for S waves and even larger for P waves. The quality factor for S waves (QS) ranges from 10 to 100 in the upper 400 m. QP for P waves is mostly below 10 within the same depth. The Quaternary sediments tend to be more attenuating (QS<30), but the Permian rocks also can have high attenuation. We demonstrate that using a non-site-dependent attenuation model in single-spectra fitting leads to large scattering in fc estimates among stations with apparent good fits. The apparent fc can significantly deviate when the range of site-dependent kappa is large or with a higher assumed source spectral fall-off rate n. The biases in apparent fc depend on site condition and distance; however, the correlation between fc and these factors might not be obvious, depending on model assumptions. An apparent increase of stress drop with magnitude in a previous study for local microearthquakes (1.3

Chang, Hilary↗

DOE OSTI2025

Rapid wavefield forecasting for earthquake early warning via deep sequence to sequence learning

We propose a deep learning model, WaveCastNet, to forecast high-dimensional wavefields. WaveCastNet integrates a convolutional long expressive memory architecture into a sequence-to-sequence forecasting framework, enabling it to model long-term dependencies and multiscale patterns in both space and time. By sharing weights across spatial and temporal dimensions, WaveCastNet requires significantly fewer parameters than more resource-intensive models such as transformers, resulting in faster inference times. Crucially, WaveCastNet also generalizes better than transformers to rare and critical seismic scenarios, such as high-magnitude earthquakes. Here, we show the ability of the model to predict the intensity and timing of destructive ground motions in real time, using simulated data from the San Francisco Bay Area. Furthermore, we demonstrate its zero-shot capabilities by evaluating WaveCastNet on real earthquake data. Our approach does not require estimating earthquake magnitudes and epicenters, steps that are prone to error in conventional methods, nor does it rely on empirical ground-motion models, which often fail to capture strongly heterogeneous wave propagation effects.

Geophysics↗

DOE OSTI2024

Precise relative magnitude measurement improves fracture characterization during hydraulic fracturing

SUMMARY Microseismic monitoring is an important technique to obtain detailed knowledge of in-situ fracture size and orientation during stimulation to maximize fluid flow throughout the rock volume and optimize production. Furthermore, considering that the frequency of earthquake magnitudes empirically follows a power law (i.e. Gutenberg–Richter), the accuracy of microseismic event magnitude distributions is potentially crucial for seismic risk management. In this study, we analyse microseismicity observed during four hydraulic fracture treatments of the legacy Cotton Valley experiment in 1997 at the Carthage gas field of East Texas, where fractures were activated at the base of the sand-shale Upper Cotton Valley formation. We perform waveform cross-correlation to detect similar event clusters, measure relative amplitude from aligned waveform pairs with a principal component analysis, then measure precise relative magnitudes. The new magnitudes significantly reduce the deviations between magnitude differences and relative amplitudes of event pairs. This subsequently reduces the magnitude differences between clusters located at different depths. Reduction in magnitude differences between clusters suggests that some attenuation-related biases could be effectively mitigated with relative magnitude measurements. The maximum likelihood method is applied to understand the magnitude frequency distributions and quantify the seismogenic index of the clusters. Statistical analyses with new magnitudes suggest that fractures that are more favourably oriented for shear failure have lower b-value and higher seismogenic index, suggesting higher potential for relatively larger earthquakes, rather than fractures subparallel to maximum horizontal principal stress orientation.

58 GEOSCIENCES↗

DOE OSTI2023

Characterizing the Geothermal Lithium Resource at the Salton Sea

The energy transition towards a more sustainable and renewable future is a pivotal global endeavor. Central to this shift for the United States is the critical role of domestically sourced lithium, a key mineral in the production of high-performance batteries essential for electric vehicles and renewable energy storage systems. This has driven the United States to invest heavily in a domestic supply chain for batterygrade lithium to enhance energy security, reduce supply chain vulnerabilities, and foster economic growth by tapping into local resources. A notable example is the Biden Administration’s “American Battery Materials Initiative,” which was included in the $2.8-billion Bipartisan Infrastructure Law (The White House, 2022).

25 ENERGY STORAGE↗

DOE OSTI2023

Towards the usage of quarry blasts as an active seismic source for subsurface characterization and imaging

SUMMARY Active or man-made seismic sources are often used to delineate subsurface geological structures via seismic imaging techniques. Although conventional controlled seismic sources have provided high-resolution subsurface images, the high cost of data acquisition necessitates improved use of cheaper alternative seismic sources for subsurface imaging, such as traffic noise, quarry blasts and earthquakes. Here, we explore the potential use of quarry blasts as an active seismic source for subsurface imaging. The goal of our study is to demonstrate the utility of quarry blasts as seismic sources for investigating subsurface structure with a field experiment in Mill Creek, southern Oklahoma. We deployed a 7455-m-long receiver line of 72 receivers (105 m spacing) extending away from a quarry, with a recording time of 28 d. We analyse similarities between blasts, wave types, origin time and excitation location of quarry blasts, which is important information for using such signal as an active source. Given a relative homogeneous geological condition in the study area, we could not observe clear reflected waves. However, the use of P- and S-wave velocities led to the delineation of a major basement damage zone in the study area, which further demonstrates the viability of quarry blasts as a useful seismic source for subsurface geological imaging.

58 GEOSCIENCES↗