Engineering topics
Murton, Jaclyn K
Publications and source records attributed to Murton, Jaclyn K.
Toward an understanding of algae flocculation and its dependence on water chemistry.
No abstract prepared.
Algal cell surface characterization and simulation for harvesting applications.
No abstract prepared.
First-principles flocculation : key to low energy algal biofuels processing.
No abstract prepared.
Optimizing algal cultivation & productivity : an innovative, multidiscipline, and multiscale approach.
Progress in algal biofuels has been limited by significant knowledge gaps in algal biology, particularly as they relate to scale-up. To address this we are investigating how culture composition dynamics (light as well as biotic and abiotic stressors) describe key biochemical indicators of algal health: growth rate, photosynthetic electron transport, and lipid production. Our approach combines traditional algal physiology with genomics, bioanalytical spectroscopy, chemical imaging, remote sensing, and computational modeling to provide an improved fundamental understanding of algal cell biology across multiple cultures scales. This work spans investigations from the single-cell level to ensemble measurements of algal cell cultures at the laboratory benchtop to large greenhouse scale (175 gal). We will discuss the advantages of this novel, multidisciplinary strategy and emphasize the importance of developing an integrated toolkit to provide sensitive, selective methods for detecting early fluctuations in algal health, productivity, and population diversity. Progress in several areas will be summarized including identification of spectroscopic signatures for algal culture composition, stress level, and lipid production enabled by non-invasive spectroscopic monitoring of the photosynthetic and photoprotective pigments at the single-cell and bulk-culture scales. Early experiments compare and contrast the well-studied green algae chlamydomonas with two potential production strains of microalgae, nannochloropsis and dunnaliella, under optimal and stressed conditions. This integrated approach has the potential for broad impact on algal biofuels and bioenergy and several of these opportunities will be discussed.
First-principles flocculation as the key to low energy algal biofuels processing.
Abstract Not Provided
Characterization of nanoporous palladium and alloys with small-angle neutron scattering and in situ XPS.
No abstract prepared.
First-principles flocculation as the key to low energy algal biofuels processing.
No abstract prepared.
Efficient breakdown of lignocellulose using mixed-microbe populations for bioethanol production.
This report documents progress in discovering new catalytic technologies that will support the development of advanced biofuels. The global shift from petroleum-based fuels to advanced biofuels will require transformational breakthroughs in biomass deconstruction technologies, because current methods are neither cost effective nor sufficiently efficient or robust for scaleable production. Discovery and characterization of lignocellulolytic enzyme systems adapted to extreme environments will accelerate progress. Obvious extreme environments to mine for novel lignocellulolytic deconstruction technologies include aridland ecosystems (ALEs), such as those of the Sevilleta Long Term Ecological Research (LTER) site in central New Mexico (NM). ALEs represent at least 40% of the terrestrial biosphere and are classic extreme environments, with low nutrient availability, high ultraviolet radiation flux, limited and erratic precipitation, and extreme variation in temperatures. ALEs are functionally distinct from temperate environments in many respects; one salient distinction is that ALEs do not accumulate soil organic carbon (SOC), in marked contrast to temperate settings, which typically have large pools of SOC. Low productivity ALEs do not accumulate carbon (C) primarily because of extraordinarily efficient extracellular enzyme activities (EEAs) that are derived from underlying communities of diverse, largely uncharacterized microbes. Such efficient enzyme activities presumably reflect adaptation to this low productivity ecosystem, with the result that all available organic nutrients are assimilated rapidly. These communities are dominated by ascomycetous fungi, both in terms of abundance and contribution to ecosystem-scale metabolic processes, such as nitrogen and C cycling. To deliver novel, robust, efficient lignocellulolytic enzyme systems that will drive transformational advances in biomass deconstruction, we have: (1) secured an award through the Department of Energy (DoE) Joint Genome Institute (JGI) to perform metatranscriptomic functional profiling of eukaryotic microbial communities of blue grama grass (Bouteloua gracilis) rhizosphere (RHZ) soils and (2) isolated and provided initial genotypic and phenotypic characterization data for thermophilic fungi. Our preliminary results show that many strains in our collection of thermophilic fungi frequently outperform industry standards in key assays; we also demonstrated that this collection is taxonomically diverse and phenotypically compelling. The studies summarized here are being performed in collaboration with University of New Mexico and are based at the Sevilleta LTER research site.
Intelligent front-end sample preparation tool using acoustic streaming.
We have successfully developed a nucleic acid extraction system based on a microacoustic lysis array coupled to an integrated nucleic acid extraction system all on a single cartridge. The microacoustic lysing array is based on 36{sup o} Y cut lithium niobate, which couples bulk acoustic waves (BAW) into the microchannels. The microchannels were fabricated using Mylar laminates and fused silica to form acoustic-fluidic interface cartridges. The transducer array consists of four active elements directed for cell lysis and one optional BAW element for mixing on the cartridge. The lysis system was modeled using one dimensional (1D) transmission line and two dimensional (2D) FEM models. For input powers required to lyse cells, the flow rate dictated the temperature change across the lysing region. From the computational models, a flow rate of 10 {micro}L/min produced a temperature rise of 23.2 C and only 6.7 C when flowing at 60 {micro}L/min. The measured temperature changes were 5 C less than the model. The computational models also permitted optimization of the acoustic coupling to the microchannel region and revealed the potential impact of thermal effects if not controlled. Using E. coli, we achieved a lysing efficacy of 49.9 {+-} 29.92 % based on a cell viability assay with a 757.2 % increase in ATP release within 20 seconds of acoustic exposure. A bench-top lysing system required 15-20 minutes operating up to 58 Watts to achieve the same level of cell lysis. We demonstrate that active mixing on the cartridge was critical to maximize binding and release of nucleic acid to the magnetic beads. Using a sol-gel silica bead matrix filled microchannel the extraction efficacy was 40%. The cartridge based magnetic bead system had an extraction efficiency of 19.2%. For an electric field based method that used Nafion films, a nucleic acid extraction efficiency of 66.3 % was achieved at 6 volts DC. For the flow rates we tested (10-50 {micro}L/min), the nucleic acid extraction time was 5-10 minutes for a volume of 50 {micro}L. Moreover, a unique feature of this technology is the ability to replace the cartridges for subsequent nucleic acid extractions.
Microscale Immune Studies Laboratory.
The overarching goal is to develop novel technologies to elucidate molecular mechanisms of the innate immune response in host cells to pathogens such as bacteria and viruses including the mechanisms used by pathogens to subvert/suppress/obfuscate the immune response to cause their harmful effects. Innate immunity is our first line of defense against a pathogenic bacteria or virus. A comprehensive 'system-level' understanding of innate immunity pathways such as toll-like receptor (TLR) pathways is the key to deciphering mechanisms of pathogenesis and can lead to improvements in early diagnosis or developing improved therapeutics. Current methods for studying signaling focus on measurements of a limited number of components in a pathway and hence, fail to provide a systems-level understanding. We have developed a systems biology approach to decipher TLR4 pathways in macrophage cell lines in response to exposure to pathogenic bacteria and their lipopolysaccharide (LPS). Our approach integrates biological reagents, a microfluidic cell handling and analysis platform, high-resolution imaging and computational modeling to provide spatially- and temporally-resolved measurement of TLR-network components. The Integrated microfluidic platform is capable of imaging single cells to obtain dynamic translocation data as well as high-throughput acquisition of quantitative protein expression and phosphorylation information of selected cell populations. The platform consists of multiple modules such as single-cell array, cell sorter, and phosphoflow chip to provide confocal imaging, cell sorting, flow cytomtery and phosphorylation assays. The single-cell array module contains fluidic constrictions designed to trap and hold single host cells. Up to 100 single cells can be trapped and monitored for hours, enabling detailed statistically-significant measurements. The module was used to analyze translocation behavior of transcription factor NF-kB in macrophages upon activation by E. coli and Y. pestis LPS. The chip revealed an oscillation pattern in translocation of NF-kB indicating the presence of a negative feedback loop involving IKK. Activation of NF-kB is preceded by phosphorylation of many kinases and to correlate the kinase activity with translocation, we performed flow cytometric assays in the PhosphoChip module. Phopshorylated forms of p38. ERK and RelA were measured in macrophage cells challenged with LPS and showed a dynamic response where phosphorylation increases with time reaching a maximum at {approx}30-60min. To allow further downstream analysis on selected cells, we also implemented an optical-trapping based sorting of cells. This has allowed us to sort macrophages infected with bacteria from uninfected cells with the goal of obtaining data only on the infected (the desired) population. The various microfluidic chip modules and the accessories required to operate them such as pumps, heaters, electronic control and optical detectors are being assembled in a bench-top, semi-automated device. The data generated is being utilized to refine existing TLR pathway model by adding kinetic rate constants and concentration information. The microfluidic platform allows high-resolution imaging as well as quantitative proteomic measurements with high sensitivity (<pM) and time-resolution ({approx}15 s) in the same population of cells, a feat not achievable by current techniques. Furthermore, our systems approach combining the microfluidic platform and high-resolution imaging with the associated computational models and biological reagents will significantly improve our ability to study cell-signaling involved in host-pathogen interactions and other diseases such as cancer. The advances made in this project have been presented at numerous national and international conferences and are documented in many peer-reviewed publications as listed. Finer details of many of the component technologies are described in these publications. The chapters to follow in this report are also adapted from other manuscripts that are accepted for publication, submitted or in preparation to be submitted to peer-reviewed journals.