Engineering Papers⌕ Search

Engineering topics

Mungal, M. G.

Publications and source records attributed to Mungal, M. G..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Supersonic jet control via point disturbances inside the nozzle

Experiments on supersonic jet control via point disturbances inside the nozzle were conducted using a pressure-matched converging-diverging nozzle with an exit diameter of 3.11 cm and an exit Mach number of 2.1. The disturbance generators are situated on the supersonic nozzle wall between the throat and the jet exit plane; the resulting fluid-mechanical disturbances are observed at the intersection of the disturbance cone and the jet lip. It is demonstrated that a single disturbance generator leads to a polygonal jet appearance, while two symmetric disturbances lead to a symmetric rectangular jet shape and two nonsymmetric disturbances lead to a star-like appearance. Significant cusps are formed in all cases.

Wishart, D. P.↗
NASA NTRS1993

LIF measurements of scalar mixing in turbulent shear layers

The structure of shear layer flows at high Reynolds numbers remains a very interesting problem. Straight mixing layers have been studied and yielded information on the probability density function (pdf) of a passive scalar across the layer. Konrad and Koochesfahani & Dimotakis measured the pdf of the mixture fraction for mixing layers of moderate Reynolds numbers, each about 25,000 (Re based on velocity difference and visual thickness). Their measurements showed a 'non-marching' pdf (central hump which is invariant from edge to edge across the layer), a result which is linked to the visualizations of the spanwise Kelvin-Helmholtz (K-H) instability mode, which is the primary instability for plane shear layer flows. A secondary instability mode, the Taylor-Gortler (T-G) instability, which is associated with streamwise vortical structures, has also been observed in shear layers. Image reconstruction by Jimenez et al. and volume renderings by Karasso & Mungal at low Re numbers have demonstrated that the K-H and the T-G instability modes occur simultaneously in a non-mutually destructive way, evidence that supports the quasi two-dimensional aspect of these flows and the non-marching character of the pdf at low Reynolds numbers. At higher Re numbers though, the interaction of these two instability modes is still unclear and may affect the mixing process. In this study, we perform measurements of the concentration pdf of plane mixing layers for different operating conditions. At a speed ratio of r = U(sub 1)/U(sub 2) = 4:1, we examine three Reynolds number cases: Re = 14,000, Re = 31,000, and Re = 62,000. Some other Re number cases' results, not presented in detail, are invoked to explain the behavior of the pdf of the concentration field. A case of r = 2.6:1 at Re = 20,000 is also considered. The planar laser-induced fluorescence technique is used to yield quantitative measurements. The different Re are obtained by changing the velocity magnitudes of the two streams. The question of resolution of these measurements is addressed. In order to investigate the effects of the initial conditions on the development and the structure of the mixing layer, the boundary layer on the high-speed side of the splitter plate is tripped. The average concentration and the average mixed fluid concentration are also calculated to further understand the changes in the shear layer for the different cases examined.

Karasso, Paris S.↗
NASA NTRS1992

Mixing in straight shear layers

Planar laser-induced fluorescence measurements were performed in a liquid plane mixing layer to extract the probability density function (pdf) of the mixture fraction of a passive scalar across the layer. Three Reynolds number (Re) cases were studied, 10,000, 33,000 and 90,000, with Re based on velocity difference and visual thickness. The results show that a non-marching pdf (central hump invariant from edge to edge of the layer) exists for Re = 10,000 but that a marching type pdf characterizes the Re = 33,000 and Re = 90,000 cases. For all cases, a broad range of mixture fraction values is found at each location across the layer. Streamwise and spanwise ramps across the layer, and structure-to-structure variation were observed and are believed to be responsible for the above behavior of the composition field. Tripping the boundary layer on the high-speed side of the splitter plate for each of the above three cases resulted in increased three-dimensionality and a change in the composition field. Average and average mixed fluid compositions are reported for all cases.

Karasso, P. S.↗
NASA NTRS1991

Scalar mixing in the supersonic shear layer

Experiments were conducted in a two-stream planar mixing layer facility at convective Mach numbers of 0.28 and 0.62. Mie scattering from condensed alcohol droplets and planar laser-induced fluorescence (PLIF) of nitric oxide were used for flow visualization in both the side and plan views. The PLIF signals were approximately proportional to mixture fraction and were used to generate statistical quantities. Visualizations using both the Mie scattering and PLIF indicate the structure is essentially two-dimensional at Mc = 0.28 and three-dimensional at Mc = 0.62. Perspective renderings of side view images show the structures are streamwise ramped at Mc = 0.28 and cross-stream ramped at Mc = 0.62. This difference appears to be associated with decreasing streamwise structure spacings at the higher Mc condition. The statistical analysis suggests that with increasing compressibility, the scalar fluctuations are smaller, and the fraction of mixed fluid is higher.

Clemens, N. T.↗
NASA NTRS1991

A planar Mie scattering technique for visualizing supersonic mixing flows

A planar Mie scattering technique is described which allows for the direct visualization of fluid mixing in supersonic flows. The mixed fluid is visualized by laser light sheet scattering from small alcohol droplets which condense as a result of the mixing of a vapor laden subsonic stream with a cold supersonic stream. Issues related to the formation, growth and size of the droplets are addressed. The technique reveals details of the turbulent structure which are masked by the spatial integration of schlieren and shadowgraph methods. Comparative visualizations using the vapor screen method to uniformly mark the high-speed fluid are also shown.

Clemens, N. T.↗
NASA NTRS1991

Studies of supersonic mixing

Studies of supersonic mixing which were accomplished over the last year with Center for Turbulence Research (CTR) support are described. During this period, a Nd:YAG laser, optical components, and data acquisition computer were obtained. This allowed detailed visualizations of the flow structure to be performed at a rapid rate, representing a significant improvement over our previous attempts. Aspects of the flow structure are described below. In addition, preliminary findings on a possible mixing enhancement strategy are also shown using the flow visualization technique.

Clemens, N. T.↗
NASA NTRS1991

An experimental study of curved mixing layers: Flow visualization using volume rendering

The existence and importance of large-scale spanwise vortical structures for 2-D straight mixing layers has been well documented in the last decade. Computer models and simulations have sought to reproduce these vortical structures associated with the Kelvin-Helmholtz (K-H) instability mode which is due to the shear per se. Secondary streamwise vortical structures for the same flows were also seen experimentally and have recently been given importance in computational efforts. Curved mixing layers can be characterized as stable (the high-speed stream is placed on the outside of the longitudinal bend), leading to a suppression of the Taylor-Gortler (T-G) instability, and unstable (high-speed stream on the inside of the bend), leading to an enhancement of the T-G instability. The T-G instability is associated with the centripetal acceleration that the curvature imparts. Thus, curvature superimposed on 2-D shear layer flows provides a way for studying the importance of streamwise vorticity, its competition with spanwise vorticity, and changes to entrainment and mixing. Furthermore, the outcome of the competition of a relatively enhanced or suppressed T-G instability with the K-H instability offers the possibility of achieving passive mixing enhancement. As a first step in understanding the competition between the K-H and the T-G instabilities and the resulting changes to the structure of the flow, highly resolved visualizations of the flow structure for the stable and the unstable configurations are provided. The straight layer is also visualized for comparison with earlier works.

Karasso, Paris S.↗
NASA NTRS1990

An experimental study of scalar mixing in curved shear layers

This report describes the work being undertaken to study the scalar mixing in curved shear layers. First, the motivation for this work and its objectives are described. Second, a description of the experimental rig that has been built is given. Third, some preliminary results (flow visualizations) are discussed, and finally, future steps that will be taken to complete the study are outlined.

Karasso, P. S.↗
NASA NTRS1988

Scalar entrainment in the mixing layer

New definitions of entrainment and mixing based on the passive scalar field in the plane mixing layer are proposed. The definitions distinguish clearly between three fluid states: (1) unmixed fluid, (2) fluid engulfed in the mixing layer, trapped between two scalar contours, and (3) mixed fluid. The difference betwen (2) and (3) is the amount of fluid which has been engulfed during the pairing process, but has not yet mixed. Trends are identified from direct numerical simulations and extensions to high Reynolds number mixing layers are made in terms of the Broadwell-Breidenthal mixing model. In the limit of high Peclet number (Pe = ReSc) it is speculated that engulfed fluid rises in steps associated with pairings, introducing unmixed fluid into the large scale structures, where it is eventually mixed at the Kolmogorov scale. From this viewpoint, pairing is a prerequisite for mixing in the turbulent plane mixing layer.

Sandham, N. D.↗
NASA NTRS1988

Use of passive scalar tagging for the study of coherent structures in the plane mixing layer

Data obtained from the numerical simulation of a 2-D mixing layer were used to study the feasibility of using the instantaneous concentration of a passive scalar for detecting the typical coherent structures in the flow. The study showed that this technique works quite satisfactorily and yields results similar to those that can be obtained by using the instantaneous vorticity for structure detection. Using the coherent events educed by the scalar conditioning technique, the contribution of the coherent events to the total turbulent momentum and scalar transport was estimated. It is found that the contribution from the typical coherent events is of the same order as that of the time-mean value. However, the individual contributions become very large during the pairing of these structures. The increase is particularly spectacular in the case of the Reynolds shear stress.

Ramaprian, B. R.↗