Engineering topics

Mukunda, H. S.

Publications and source records attributed to Mukunda, H. S..

7 records

NASA NTRS1992

Direct simulation of high-speed mixing layers

A computational study of a nonreacting high-speed mixing layer is performed. A higher order algorithm with sufficient grid points is used to resolve all relevant scales. In all cases, a temporal free-stream disturbance is introduced. The resulting flow is time-sampled to generate a statistical cross section of the flow properties. The studies are conducted at two convective Mach numbers, three free-stream turbulence intensities, three Reynolds numbers, and two types of initial profiles-hyperbolic tangent (tanh) and boundary layer. The boundary-layer profile leads to more realistic predictions of the transition processes. The predicted transition Reynolds number of 0.18 x 10(exp 6) compares well with experimental data. Normalized vortex spacings for the boundary-layer case are about 3.5 and compare favorably with the 1.5 to 2.5 found in experimental measurements. The tanh profile produces spacings of about 10. The growth rate of the layer is shown to be moderately affected by the initial disturbance field, but comparison with experimental data shows moderate agreement. For the boundary-layer case, it is shown that noise at the Strouhal number of 0.007 is selectively amplified and shows little Reynolds number dependence.

Mukunda, H. S.↗

NASA NTRS1992

Two-dimensional stability of laminar flames

The stability of laminar flames was studied numerically and the dependence of stability on finite rate chemistry with low activation energy and variable thermodynamic and transport properties was addressed. The calculations show that activation energy and details of chemistry play a minor role in altering the linear neutral stability results from asymptotic analysis. Variable specific heat makes a marginal change to the stability; variable transport properties, on the other hand, tend to substantially enhance the stability from a critical wave number of about 0.50 to 0.20. Also, the effects of variable properties tend to nullify the effects of nonunity Lewis number. When the Lewis number of a single species is different from unity, as is true in a hydrogen-air premixed flame, the stability results remain close to that of unity Lewis number.

Mukunda, H. S.↗

NASA NTRS1991

The direct simulation of high-speed mixing-layers without and with chemical heat release

A direct numerical simulation of high speed reacting and non-reacting flows for H2-air systems is presented. The calculations are made for a convective Mach number of 0.38 with hyperbolic tangent initial profile and finite rate chemical reactions. A higher-order numerical method is used in time accurate mode to time advance the solution to a statistical steady state. About 600 time slices of all the variables are then stored for statistical analysis. It is shown that most of the problems of high-speed combustion with air are characterized by relatively weak heat release. The present study shows that: (1) the convective speed is reduced by heat release by about 10 percent at this convective Mach number M(sub c) = 0.38; (2) the variation of the mean and rms fluctuation of temperature can be explained on the basis of temperature fluctuation between the flame temperature and the ambient; (3) the growth rate with heat release is reduced by 7 percent; and (4) the entrainment is reduced by 25 percent with heat release. These differences are small in comparison with incompressible flow dynamics, and are argued to be due to the reduced importance of heat release in comparison with the large enthalpy gradients resulting from the large-scale vortex dynamics. It is finally suggested that the problems of reduced mixing in high-speed flows are not severely complicated by heat release.

Sekar, B.↗

NASA NTRS1989

Mixing and combustion enhancement in supersonic reacting flows

Research has been conducted for a number of years at the NASA Langley Research Center to develop a supersonic combustion ramjet (scramjet) capable of propelling a vehicle at hypersonic speeds in the atmosphere or beyond. Recently, that research has been directed toward the optimization of the scramjet combustor, and in particular the efficiency of fuel-air mixing and reaction in the engine. This paper describes a study of fuel-air mixing and reaction in a supersonic flow field, and discusses several techniques that were applied for enhancing the mixing processes and overal combustion efficiency in the flow. Based on the results of the study, an alternate fuel injector configuration was computationally designed, and that configuration significantly increased the amount of fuel-air mixing and combustion over a given combustor length that was achieved.

Drummond, J. Philip↗

NASA NTRS1988

Modeling of supersonic reacting flow fields

A detailed understanding of the scramjet combustor flow field is critical to the achievement of a successful design. Even though the combustor flow field is quite complex, it can be realistically viewed as a collection of spatially developing and reacting supersonic mixing layers that are initially discrete, but that ultimately merge into larger more complex zones. These mixing layers begin downstream of a set of fuel injectors that introduce gaseous hydrogen in both a parallel and transverse direction into a supersonic air stream entering from the engine inlet. The behavior of the initial portion of the combustor flow, in the mixing layers near the fuel injectors, appears to be most critical, since this is where the mechanism for efficient high speed mixing must be established to achieve the required degree of combustion downstream. Because of the structure of the flow field in this initial portion of the combustor, a single supersonic, spatially developing and reacting mixing layer serves as an excellent physical model for the overall flow field. Even though this reacting mixing layer flow is geometrically simple, it can still be made to retain all of the fluid mechanical and chemical complexities present in the actual combustor flow field.

Drummond, J. P.↗

NASA NTRS1988

A numerical study of mixing enhancement in supersonic reacting flow fields

NASA Langley has intensively investigated the components of ramjet and scramjet systems for endoatmospheric, airbreathing hypersonic propulsion; attention is presently given to the optimization of scramjet combustor fuel-air mixing and reaction characteristics. A supersonic, spatially developing and reacting mixing layer has been found to serve as an excellent physical model for the mixing and reaction process. Attention is presently given to techniques that have been applied to the enhancement of the mixing processes and the overall combustion efficiency of the mixing layer. A fuel injector configuration has been computationally designed which significantly increases mixing and reaction rates.

Drummond, J. Philip↗

NASA NTRS1988

Variable property analysis - Is there anything to it?

It is shown that the inclusion of variable thermodynamic and transport properties in the analysis of combusting flows qualitatively and quantitatively alters the results. Consideration is given to the following results: single droplet combustion, forced convective turbulent boundary layer combustion, and free convective combustion. In the case of the turbulent boundary layer combustion of solid/liquid fuels, it is shown that the fuel significantly influences the regression rate as it is found in the experiments.

Mukunda, H. S.↗