Engineering Papers⌕ Search

Engineering topics

Mousseau, Vincent A.

Publications and source records attributed to Mousseau, Vincent A..

Improved Uncertainty Quantification with Advanced Reactor Application

This document provides an overview of the economic and technical challenges related to bringing small modular reactors to market and then presents an outline for how to address the new challenges. The purpose of this project was to proactively design software for its intended use to provide a strategic positioning for work in the future. This project seeks to augment the short-term stop-gap approach of trying to use legacy software well outside of its range of applicability.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Simple Heat Pipe Model

This is a simple model designed to run fast but still maintain the key physics and feedback mechanisms of a heat pipe. First, the capillary pressure is a function of the liquid working fluid volume fraction. Second, the boiling and condensation are based on the saturation temperature that is based on the heat pipe pressure. When the pressure goes up, the saturation temperature goes up and the vapor rains on the wick. When the pressure goes down, the saturation temperature goes down and the liquid in the entire wick boils. This is how the heat pipe adjusts to stay robust under different temperatures and heat fluxes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Preliminary Implementation of Two-Dimensional Cartesian Solver in CTF-R

Sub-channel codes are one of the the modeling and simulation tools used for thermal-hydraulic analysis of nuclear reactors. A few examples of such sub-channel codes are the COolant Boiling in Rod Arrays (COBRA) family of codes. The approximations that are used to simplify the fluid conservation equations into sub-channel form, mainly that of axially-dominated flow, lead to noticeable limitations on sub-channels solvers for problems with significant flow in lateral directions. In this report, a two-dimensional Cartesian solver is developed and implemented within CTF-R, which is the residual solver in the North Carolina State University version of COBRA-TF (CTF). The new solver will enable CTF to simulate flow that is not axially-dominated. The appropriate Cartesian forms of the conservation equations are derived and implemented in the solver. Once the conservation equations are established, the process of constructing the matrix system was altered to solve a two-dimensional staggered grid system. A simple case was used to test that the two-dimensional Cartesian solver is accurate. The test problem does not include any source terms or flow in the lateral direction. The results show that the solver was able to run the simple case and converge to a steady-state solution. Future work will focus on testing existing capabilities by using test cases that include transients and equation cross-terms. Future work will also include adding additional capabilities such as enabling the solver to include cases with source terms and three dimensional cases.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Validation Metrics for Fixed Effects and Mixed-Effects Calibration

The modern scientific process often involves the development of a predictive computational model. To improve its accuracy, a computational model can be calibrated to a set of experimental data. A variety of validation metrics can be used to quantify this process. Some of these metrics have direct physical interpretations and a history of use, while others, especially those for probabilistic data, are more difficult to interpret. In this work, a variety of validation metrics are used to quantify the accuracy of different calibration methods. Frequentist and Bayesian perspectives are used with both fixed effects and mixed-effects statistical models. Through a quantitative comparison of the resulting distributions, the most accurate calibration method can be selected. Two examples are included which compare the results of various validation metrics for different calibration methods. It is quantitatively shown that, in the presence of significant laboratory biases, a fixed effects calibration is significantly less accurate than a mixed-effects calibration. This is because the mixed-effects statistical model better characterizes the underlying parameter distributions than the fixed effects model. The results suggest that validation metrics can be used to select the most accurate calibration model for a particular empirical model with corresponding experimental data.

97 MATHEMATICS AND COMPUTING↗

Local Truncation Error-Informed Code Verification

The method of manufactured solutions (MMS) has become increasingly popular in conducting code verification studies on predictive codes, such as nuclear power system codes and computational fluid dynamic codes. The reason for the popularity of this approach is that it can be used when an analytical solution is not available. Using MMS, code developers are able to verify that their code is free of coding errors that impact the observed order of accuracy. While MMS is still an excellent tool for code verification, it does not identify coding errors that are of the same order as the numerical method. This paper presents a method that combines MMS with modified equation analysis (MEA), which calculates the local truncation error (LTE) to identify coding error up to and including the order of the numerical method. This method is referred to as modified equation analysis methd of manufactured solutions (MEAMMS). MEAMMS is then applied to a custom-built code, which solves the shallow water equations, to test the performance of the code verification method. MEAMMS is able to detect all coding errors that impact the implementation of the numerical scheme. To show how MEAMMS is different than MMS, they are both applied to the same first-order numerical method test problem with a first-order coding error. When there are first-order coding errors, only MEAMMS is able to identify them. Finally, this shows that MEAMMS is able to identify a larger set of coding errors while still being able to identify the coding errors MMS is able to identify.

42 ENGINEERING↗

High-to-Low Activities across VVI, AMA and PHI

This milestone report documents work performed in CASL that was broadly focused on the use of validated high-fidelity simulation codes to inform, improve and calibrate low-fidelity codes to facilitate multiphysics coupling, design, performance analysis, and risk assessment. This high-to-low (Hi2Lo) initiative has the following objectives: employ physics encapsulated in high-fidelity codes to improve the functionality of low-fidelity codes, quantify biases in low-fidelity codes, develop and calibrate physical models and closure relations so that low-fidelity codes more accurately incorporate requisite physics, and develop low-fidelity codes that can be effectively coupled to simulate multiphysics behavior. In combination, these efforts are designed to impact both CIPS and DNB. For example, the development and experimental design-based Bayesian calibration of dynamic gas conductance models in CTFFuel will provide the capability to better model crud-induced power shifts. Whereas the present emphasis has focused on the high-fidelity codes STAR-CCM+ and BISON and low-fidelity codes CTF and CTFFuel, future emphasis will be expanded to include MAMBA. During the reporting period, Hi2Lo efforts focused on two broad components: demonstration of the experimental design-based Bayesian calibration framework to calibrate CTF using both STAR-generated synthetic data and experimental data, and the use of STAR to inform and improve the turbulence modeling and grid heat transfer modeling capabilities in CTF. A complementary milestone focused on the implementation and verification of fuel models in CTFFuel, for which we demonstrated initial calibration results. Future Hi2Lo work will focus on the use of the experimental design-based Bayesian calibration framework, demonstrated this year for STAR and CTF, to calibrate parameters in the fuel swelling, fuel irradiation-induced densification, and fuel relocation models in CTFFuel using both experimental and BISON-generated data. A second component will focus on the continued use of STAR to improve grid modeling capabilities in CTF.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Implementation of a pressure correction term in the CTF sub-channel code

CTF [1] is a modernized and improved version of the legacy subchannel code, COBRA-TF [2], that is being jointly developed and maintained by Oak Ridge National Laboratory (ORNL) and North Carolina State University. The code was adopted by ORNL for use in the Consortium for Advanced Simulation of Light Water Reactors (CASL) in 2012 for aiding in addressing CASL challenge problems. Since that time, activities related to CTF have included implementing software quality assurance measures, implementing new features and models, performing validation and verification testing, establishing and supporting a CTF User Group, and developing the code for use in coupled applications [3, 4, 5]. CTF is applicable to single- and two-phase flows in light water reactor geometries at normal and accident operating conditions. The two-phase flow model consists of the six-equation two-phase flow model [6] augmented by equations for the droplet field and also includes appropriate source terms. This work focuses on the numerical stability of the six-equation two-phase flow model and is part of a recent eort to improve CTF capabilities for simulating flows in boiling nuclear reactors (BWRs). As it is of common knowledge among the thermodynamic community, the six-equation two-phase flow model is not strongly hyperbolic, meaning some of its eigenvalues are either not real or not distinct [7]. In a Cauchy sense and for an initial-value problem, strong hyperbolicity was found to be equivalent to well-posedness which ensures uniqueness of the solution in the space-time used. This concept is also of importance when designing high-order numerical methods and also when implementing boundary conditions that rely on real eigenvalues such as Riemann solvers. A tremendous amount of research is available in the literature on how to hyperbolize the six-equation two-phase flow model by adding ad hoc terms to the system of equations often referred to as virtual mass or interfacial pressure correction term. From a mathematical prospective, the main idea driving this approach is to add terms to the phasic momentum equation containing first-order partial derivatives of the unknowns to modify the Jacobian matrix and thus canceling the imaginary part of the eigenvalues.For this work it was chosen to implement a interfacial pressure correction (IPC) term on the same model as what was done for the CATHARE system code [8], that allows to recover a two-pressure formulation. In the following, the six-equation two-phase flow model is recalled along with the IPC term and its influence on the eigenvalues. Then, numerical results and convergence studies are presented for a water-faucet problem [9] at a pressure of 10 bar. Finally, conclusions and future work are addressed.

Delchini, Marco↗

Cobra-TF Parameter Exposure Work

The purpose of this work is to provide improved VUQ capability for CTF. We will initially focus on uncertainty quantification, but we will keep the larger scope of SQA, verification, validation, calibration, and optimization in mind while we work on uncertainty quantification. This is a living document that will be amended as the work is completed. Note that any reference to the CTF software is based on the code version of 12/17/13.

97 MATHEMATICS AND COMPUTING↗