Engineering topics

Morris, W. Douglas

Publications and source records attributed to Morris, W. Douglas.

8 records

NASA NTRS2004

Modeling and Simulation of Reliability & Maintainability Parameters for Reusable Launch Vehicles using Design of Experiments

This paper describes the development of a methodology for estimating reliability and maintainability distribution parameters for a reusable launch vehicle. A disciplinary analysis code and experimental designs are used to construct approximation models for performance characteristics. These models are then used in a simulation study to estimate performance characteristic distributions efficiently. The effectiveness and limitations of the developed methodology for launch vehicle operations simulations are also discussed.

Unal, Resit↗

NASA NTRS2000

Approximation Model Building for Reliability & Maintainability Characteristics of Reusable Launch Vehicles

This paper describes the development of parametric models for estimating operational reliability and maintainability (R&M) characteristics for reusable vehicle concepts, based on vehicle size and technology support level. A R&M analysis tool (RMAT) and response surface methods are utilized to build parametric approximation models for rapidly estimating operational R&M characteristics such as mission completion reliability. These models that approximate RMAT, can then be utilized for fast analysis of operational requirements, for lifecycle cost estimating and for multidisciplinary sign optimization.

Unal, Resit↗

NASA NTRS1993

The X-15/HL-20 operations support comparison

During the 1960's, the United States X-15 rocket-plane research program successfully demonstrated the ability to support a reusable vehicle operating in a near-space environment. The similarity of the proposed HL-20 lifting body concept in general size, weight, and subsystem composition to that of the X-15 provided an opportunity for a comparison of the predicted support manpower and turnaround times with those experienced in the X-15 program. Information was drawn from both reports and discussions with X-15 program personnel to develop comparative operations and support data. Based on the assumption of comparability between the two systems, the predicted staffing levels, skill mix, and refurbishment times of an operational HL-20 appear to be similar to those experienced by the X-15 for ground support. However, safety, environmental, and support requirements have changed such that the HL-20 will face a different operating environment than existed at Edwards during the 1950's and 1960's. Today's operational standards may impose additional requirements on the HL-20 that will add to the maintenance and support burden estimate based on the X-15 analogy.

Morris, W. Douglas↗

NASA NTRS1991

Parametric trade studies on a Shuttle 2 launch system architecture

A series of trade studies are presented on a complementary architecture of launch vehicles as a part of a study often referred to as Shuttle-2. The results of the trade studies performed on the vehicles of a reference Shuttle-2 mixed fleet architecture have provided an increased understanding of the relative importance of each of the major vehicle parameters. As a result of trades on the reference booster-orbiter configuration with a methane booster, the study showed that 60 percent of the total liftoff thrust should be on the booster and 40 percent on the orbiter. It was also found that the liftoff thrust to weight ratio (T/W) on the booster-orbiter should be 1.3. This leads to a low dry weight and still provides enough thrust to allow the design of a heavy lift architecture. As a result of another trade study, the dry weight of the reference booster-orbiter was chosen for a variety of operational considerations. Other trade studies on the booster-orbiter demonstrate that the cross feeding of propellant during boost phase is desirable and that engine-out capability from launch to orbit is worth the performance penalty. Technology assumptions made during the Shuttle-2 design were shown to be approx. equivalent to a 25 percent across the board weight reduction over the Space Shuttle technology. The vehicles of the Shuttle-2 architecture were also sized for a wide variety of payloads and missions to different orbits. Many of these same parametric trades were also performed on completely liquid hydrogen fueled fully reusable concepts. If a booster-orbiter is designed using liquid hydrogen engines on both the booster and orbiter, the total vehicle dry weight is only 3.0 percent higher than the reference dual-fuel booster-orbiter, and the gross weight is 3.8 percent less. For this booster-orbiter vehicle, a liftoff T/W of 1.3, a thrust of about 60 percent on the booster, and a Mach staging number of 3 all proved to be desirable. This modest dry weight increase for a liquid hydrogen fueled Shuttle-2 system should be more than offset by the elimination of the entire hydrocarbon engine development program and the savings in operation cost realized by the elimination of an entire fuel type.

Stanley, Douglas O.↗

NASA NTRS1991

Conceptual design of a next-generation, fully reusable manned launch system

The conceptual design of a rocket-powered, two-stage fully reusable launch vehicle has been performed as a part of the Advanced Manned Launch System (AMLS) study at the NASA Langley Research Center. The main goals of the AMLS study are to provide routine, low-cost manned access to space. Technologies and system approaches have been studied that would contribute to significant reductions in operating costs relative to current systems. System and operational characteristics of the two-stage fully reusable vehicle are presented, and the various tools and methods used in the design process are summarized. The results of a series of trade studies performed to examine the effect of varying major vehicle parameters on the reference two-stage fully reusable vehicle are also summarized.

Stanley, Douglas O.↗

NASA NTRS1991

Advanced technologies for rocket single-stage-to-orbit vehicles

A single-stage-to-orbit vertical takeoff/horizontal landing rocket vehicle was studied to determine the benefits of advanced technology. Advanced technologies that were included in the study were variable mixture ratio oxygen/hydrogen rocket engines and materials, structures, and subsystem technologies currently being developed in the National Aero-Space Plane Program. The application of advanced technology results in an 85 percent reduction in vehicle dry weight. With advanced materials, an external thermal protection system, like the Space Shuttle tiles, was not required. Compared to an all-airbreathing horizontal takeoff/horizontal landing vehicle using the same advanced technologies and mission requirements, the rocket vehicle is lighter in dry weight and has fewer subsystems. To increase reliability and safety, operational features were included in the rocket vehicle-robust subsystems, 5 percent additional margin, no slush hydrogen, fail-operational with an engine out, and a crew escape module. The resulting vehicle grew in dry weight and was still lower in dry weight than the airbreathing vehicle.

Wilhite, Alan W.↗

NASA NTRS1989

Advanced Manned Launch Systems

Advanced Manned Launch Systems (AMLS) studies underway at the NASA Langley Research Center are part of a broader effort examining options for the next U.S. manned space transportation system. AMLS study phases have focused on investigating mission needs and identifying technologies and technology levels, concepts, systems, operational requirements, and life-cycle costs. For near-term technologies and an operations-oriented approach, two-stage vertical-takeoff rocket vehicles with significant levels of reusability are shown to be cost-effective for moderate to high flight rates. All-hydrogen fuel vehicles are also preferred over methane boosted systems from both operational and cost considerations.

Talay, Theodore A.↗

NASA NTRS1987

A space transportation system operations model

Presented is a description of a computer program which permits assessment of the operational support requirements of space transportation systems functioning in both a ground- and space-based environment. The scenario depicted provides for the delivery of payloads from Earth to a space station and beyond using upper stages based at the station. Model results are scenario dependent and rely on the input definitions of delivery requirements, task times, and available resources. Output is in terms of flight rate capabilities, resource requirements, and facility utilization. A general program description, program listing, input requirements, and sample output are included.

Morris, W. Douglas↗