Engineering Papers⌕ Search

Engineering topics

Morris, Richard V.

Publications and source records attributed to Morris, Richard V..

At least 91 records · Page 5

Hematite formed from pyroxene on Mars by meteoritic impact

In earlier work, we showed using Mossbauer data that the mineralogy of iron-bearing phases in impact melt rocks from Manicouagan Crater (Quebec, Canada) is to a first approximation hematite and pyroxene. The visible and near-IR reflectivity data for these impact melt rocks show a continuous trend in band position from approximately 850 to approximately 1000 nm, which corresponds to the positions for the hematite and pyroxene endmembers, respectively. The oxidation is thought to occur shortly after the impact when oxidizing vapors and/or solutions reacted with the impact melt which was below its solidus temperature but still relatively hot. The reflectance data have important implications for Mars because band positions which occur between approximately 850 and 1000 nm bands observed for Mars can be attributed to hematite-pyroxene assemblages and not necessarily to different ferric mineralogy. Because oxidation of impact melt rocks at Manicouagan is thought to occur subsolidus, precursors for the hematite include oxides such as magnetite and ilmenite and silicates such as pyroxene and olivine. To determine if the Manicouagan impact-melt rocks are related to each other by simple thermal subsolidus oxidation, we calcined in air a relatively unoxidized Manicouagan impact-melt rock (MAN-74-608A). Previous work has shown that np-Hm (nanophase hematite) particles can be derived by calcination of iron-bearing silicates.

Morris, Richard V.↗

Moessbauer mineralogy of calcined Murchison meteorite

The three Antarctic meteorites B7904, Y82162, and Y86720 are unusual because they have characteristics in common with both CI and CM groups and because they apparently underwent thermal alteration after hydrous alteration on their parent body. They are also spectrally similar (visible and near-IR) to C, G, B, and F asteroids, which may imply that the surface materials on those asteroids may have undergone thermal alteration. Based on the reflectance spectra of samples of Murchison (CM2 carbonaceous chondrite) that were thermally altered in the laboratory (cryopumped and initial 10(exp -5) atm H2), Hiroi et al. concluded that putative thermal alteration occurred at temperatures of 600 to 1000 C. Similar experiments have been done on Murchison and reported mineralogical changes based on data from transmission electron diffraction microscopy, electron diffraction, and analytical electron microscopy. We report here the Mossbauer mineralogy of the same samples of thermally-altered Murchison. Mossbauer mineralogy gives the molar distribution of Fe among its oxidation states and iron-bearing mineralogies.

Morris, Richard V.↗

Thermally altered palagonitic tephra - A spectral and process analog to the soil and dust of Mars

Six palagonitic soil samples (PH-1 through PH-6) which were collected at 30-cm intervals from a lava slab on Mauna Kea, Hawaii, are studied. The samples present an alteration sequence caused by heating during emplacement of molten lava over a preexisting tephra cone. Techniques employed include visible and near-IUR spectroscopy, Moessbauer spectroscopy, and magnetic analysis. The four samples closest to the slab (PH-1 through PH-4) were strongly altered in response to heating during its emplacement; their iron oxide mineralogy is dominated by nanophase ferric oxide. The sample adjacent to the slab (PH-1) has a factor of 3 less H2O and contains crystalline hematite and magnetite in addition to nanophase ferric oxide. It is argued that localized thermal alteration events may provide a volumetrically important mechanism for the palagonitization of basaltic glass and the production of crystalline ferric oxides on Mars.

Bell, James F., III↗

Changes in Hawaiian palagonite FE mineralogy associated with thermal alteration: Implications for Mars

We have studied six Hawaiian palagonitic tephra samples (PH-1 through PH-6) from a site where a Mauna Loa lava flow has partially embayed a Mauna Kea cinder cone Tephra samples that were not affected by the lava flow (PH-5, PH-6) consist of partially palagonitized coarse-grained glassy Hawaiitic particles whose iron mineralogy is dominated by nanophase ferric oxide (np-Ox) and olivine. Samples closest to the lava flow (PH-1 through PH-4) have been strongly altered and their iron mineralogy is dominated by np-Ox, magnetite, and hematite. This suite of samples has many spectral similarities to Martian bright regions; thus, this localized thermal alteration event may be an analog to similar processes on Mars that lead to the production of small amounts of crystalline ferric oxides within a poorly-crystalline or amorphous palagonitic matrix.

Bell, James F., III↗

Composition and maturity of the 60013/14 core

The 60013/14 double drive tube (62 cm deep) is one of three regolith cores taken 35-40 m apart in a triangular array on the Cayley plains at station 10' (LM/ALSEP), Apollo 16. This trio, which includes double drive tube 60009/10 (59 cm deep) and deep drill core 60001-7 (220 cm), is the only such array of cores returned from the Moon. The top 45 cm of 60013/14 is mature, as is surface reference soil 60601 taken nearby. Maturity generally decreases with depth, with soil below 45 cm being submature. The zone of lowest maturity (34 is less than or equal to I(sub s)/FeO is less than 50) extends from 46 to 58 cm depth, and corresponds to the distinct region of light-colored soil observed during core processing. In the other two cores, most of the compositional variation results from mixing between fine-grained, mature soil with 10-11 micro-g/g Sc and coarse-grained ferroan anorthosite consisting of greater than 99% plagioclase with less than 0.5 micro-g/g Sc. This is most evident in 60009/10 which contains a high abundance of plagioclase at about 54 cm depth (minimum Sc: 3-4 micro-g/g); a similar zone occurs in 60001-7 at 17-22 cm (MPU-C), although it is not as rich in plagioclase (minimum Sc: 6-7 micro-g/g). Compositional variations are less in 60013/14 than in the other two cores (range: 7.9-10.0 micro-g/g Sc), but are generally consistent with the 'plagioclase dilution' effect seen in 60009/10, i.e., most 60013/14 samples plot along the mixing line of 60009/10. However, a plagioclase component is not the cause of the lower maturity and lighter color of the unit at 46-58 cm depth in 60013/14. Many of the samples in this zone have distinctly lower Sm/Sc ratios than typical LM-area soils and plot off the mixing trend defined by 60009/10. This requires a component with moderately high Sc, but low-Sm/Sc, such as feldspathic fragmental breccia (FFB) or granulitic breccia. A component of Descartes regolith, such as occurs at North Ray Crater (NRC) and which is rich in FFB, could account for the composition of these soils (i.e., a 3:1 mixture of 60601 and NRC soil). It seems unlikely that NRC ejecta would occur half a meter deep at the LM station, thus this low-Sm/Sc component may result from an older, local crater that penetrated the Cayley surface layer and excavated underlying Descartes material, as did North Ray Crater. There is no evidence for such a unit or component in the other two cores. Soil below the light-colored unit (58-62) cm has 'typical' Sm/Sc ratios, but the lowest absolute Sc concentrations, i.e., it is compositionally equivalent to a mixture of surface soil and plagioclase such as that in ferroan anorthosite. This is the only soil that might be related to the plagioclase-rich units in the other two cores. Except for the mature soil at the top of each core and, perhaps, the plagioclase-rich layers, there is little compositional evidence for any common unit among the three cores. Soil corresponding to the mare-glass-bearing unit (MPU-B) and regolith-breccia-bearing unit (MPU-A) of 60001-7 do not occur in 60013/14 or 60009/10.

Korotev, Randy L.↗

Composition and Maturity of Apollo 16 Regolith Core 60013/14

Samples from every half-centimeter dissection interval of double drive tube 60013/14 (sections 60013 and 60014) were analyzed by magnetic techniques for Fe concentration and surface maturity parameter I(sub s)/ Fe(O), and by neutron activation for concentrations of 25 lithophile and siderophile elements. Core 60013/14 is one of three regolith cores taken in a triangular array 40-50 m apart on the Cayley plains during Apollo 16 mission to the Moon. The core can be divided into three zones based both on I(sub s)/FeO and composition. Unit A (0-44 cm depth) is compositionally similar to other soils from the surface of the central region of the site and is mature throughout, although maturity decreases with depth. Unit B (44-59 cm) is submature and compositionally more feldspathic than Unit A. Regions of lowest maturity in Unit B are characterized by lower Sm/Sc ratios than any soil obtained from the Cayley plains as a result of some unidentified lithologic component with low surface maturity. The component is probably some type of mafic anorthosite that does not occur in such high abundance in any of the other returned soils. Unit C (59-62 cm) is more mature than Unit B and compositionally equivalent to an 87: 13 mixture of soil such as that from Unit A and plagioclase such as found in ferroan anorthosite. Similar soils, but containing greater abundances of anorthosite (plagioclase), are found at depth in the other two cores of the array. These units of immature to submature soil enriched to varying degrees (compared to the mature surface soil) in ferroan anorthosite consisting of approx. 99% plagioclase are the only compositionally distinct subsurface similarities among the three cores. Each of the cores contains other units that are compositionally dissimilar to any soil unit in the other two cores. These compositionally distinct units probably derive from local subsurface blocks deposited by the event(s) that formed the Cayley plains. The ferroan anorthosite with approx. 99% plagioclase, however, must represent some subsurface lithology that is significant on the scale of tens of meters. The compositional uniformity of the surface soil (0-10 cm depth) over distances of kilometers reflects the large-scale uniformity of the plains deposits; the fine- structure reflects small-scale nonuniformity and the inefficiency of the impact-mixing process at depths as shallow as even one meter.

Korotev, Randy T.↗

Martian weathering/alteration scenarios from spectral studies of ferric and ferrous minerals

We review the major aspects of our current knowledge of martian ferric and ferrous mineralogy based on the available ground-based telescopic and spacecraft data. What we know and what we don't know are used to constrain various weathering/alteration models and to identify key future measurements and techniques that can distinguish between these models.

Bell, James F., III↗

Effect of DCB extraction on Mossbauer and spectral data for a Hawaiian palagonitic soil (PN-9): Iden tification of pigmentary phases

The study of palagonitic soils is an active area of research in martian geoscience because the spectral and magnetic properties of a subset are spectral and/or magnetic analogues of martian bright regions. An understanding of the composition, distribution, and mineralogy of ferric-bearing phases for palagonitic soils forms, through spectral and magnetic data, a basis for inferring the nature of ferric-bearing phases on Mars. Progress has been made in this area, but the data set is incomplete, especially with respect to the nature of pigmenting phases. The purpose of this study is to identify the nature of the pigment for Hawaiian palagonitic soil PN-9 by using extraction procedures to selectively remove iron oxide phases. This soil was collected at the same locale as samples Hawaii 34 and VOL02. All three soils are good spectral analogues for martian bright regions.

Morris, Richard V.↗

Reflectivity (visible and near IR), Moessbauer, static magnetic, and X ray diffraction properties of aluminum-substituted hematites

The effect of substituting iron by aluminum in polymorphs of Fe2O3 and FeOOH on their reflectivity characteristics was investigated by comparing data on visible and NIR reflectivities and on static magnetic, XRD, and Moessbauer properties for a family of aluminum-substituted hematites alpha-(Fe,Al)2O3, with compositions where the values of the Al/(Al+Fe) ratio were up to 0.61. Samples were prepared by oxidation of magnetite, dehydroxylation of goethite, and direct precipitation. The analytical methods used for obtaining diffuse reflectivity spectra (350-2200 nm), Moessbauer spectra, and static magnetic data are those described by Morris et al. (1989).

Morris, Richard V.↗

Lunar oxygen - The reduction of glass by hydrogen

The direct reduction of volcanic glass by hydrogen has been proposed as a method of extracting oxygen from the lunar soil. Experiments using lunar simulant glasses reacted with flowing hydrogen gas have demonstrated reduction at temperatures from 1000 to 1200 C. For melted samples ferrous iron was reduced to the metal, which formed large crystals at the expense of the glass. Samples held below the melting point rapidly devitrified, and iron was formed from submicrometer crystals of ilmenite and pyroxene. Weight losses of 3.6 - 4.5 percent, depending on glass composition, were achieved in 3 hours at 1100 C. A lunar oxygen plant operating at this efficiency and utilizing Apollo 17 orange glass as a feedstock could produce 50 kg of oxygen per ton of soil. The processes of reduction and sintering of lunar soil are synergistic, and could be combined to produce both oxygen and construction material at a moon base.

Allen, Carlton C.↗

Experimental reduction of simulated lunar glass by carbon and hydrogen and implications for lunar base oxygen production

The most abundant element in lunar rocks and soils is oxygen which makes up approximately 45 percent by weight of the typical lunar samples returned during the Apollo missions. This oxygen is not present as a gas but is tightly bound to other elements in mineral or glass. When people return to the Moon to explore and live, the extraction of this oxygen at a lunar outpost may be a major goal during the early years of operation. Among the most studied processes for oxygen extraction is the reduction of ilmenite by hydrogen gas to form metallic iron, titanium oxide, and oxygen. A related process is proposed which overcomes some of the disadvantages of ilmenite reduction. It is proposed that oxygen can be extracted by direct reduction of native lunar pyroclactic glass using either carbon, carbon monoxide, or hydrogen. In order to evaluate the feasibility of this proposed process a series of experiments on synthetic lunar glass are presented. The results and a discussion of the experiments are presented.

Mckay, David S.↗

Origins of Marslike spectral and magnetic properties of a Hawaiian palagonitic soil

Results are presented on spectral, Moessbauer, static magnetic, petrographic, and compositional data for a Hawaiian palagonitic soil from Mauna Kea (HWMK1). It was found that reflectivity spectra of size separates smaller than 20 microns resemble spectra for Martian bright regions, while spectra of larger size separates show characteristics in common with spectra for Martian dark regions. Data on the HWMK1 soil are consistent with the partitioning of iron among the following minerals: olivine, titanomagnetite, hematite, and a superparamagnetic colored ferric oxide. These mineralogies are heterogeneously distributed within the soil with respect to both particle type and soil-particle diameter. The strongly magnetic titanomagnetite is associated with black particles and is responsible for the magnetic nature of the soil, while the colored weakly magnetic superparamagnetic ferric oxide and minor hematite are associated with orange particles.

Morris, Richard V.↗

Matrix effects for reflectivity spectra of dispersed nanophase (superparamagnetic) hematite with application to Martian spectral data

The effect of the matrix on the reflectivity spectra of nanophase (superparamagnetic) hematite (np-Hm) dispersed within the matrix was investigated in four series of powder samples containing np-Hm dispersed within discrete powder particles (of two size ranges) of silica gel and activated alumina. The spectral data show that matrix effects are large. Samples with the same Fe2O3 content can have np-Hm absorption edges characterized by very different positions and curvature and slope indices, while samples with equivalent absorption edges can have very different Fe2O3 concentrations. Thus, quantitative relationships between the positions of ferric absorption edges and Fe2O3 concentrations are unreliable without knowledge of matrix properties of the system. It is shown that it was possible to match the Fe2O3 concentration, magnetic properties, and spectral data for Martian surface material with a laboratory mixture whose only ferric-bearing phase was hematite.

Morris, Richard V.↗

In quest of lunar regolith breccias of exotic provenance - A uniquely anorthositic sample from the Fra Mauro (Apollo 14) highlands

Bulk compositions of 21 Apollo regolith breccias were determined using an INAA procedure modified from that of Kallemeyn et al. (1989). With one major exception, namely, the 14076,1 sample, the regolith breccias analyzed were found to be not significantly different from the surfaces from which they were collected. In contrast, the 14076,1 sample from the Fra Mauro (Apollo 14) region is a highly anorthositic regolith breccia from a site where anorthosites are extremely scarce. The sample's composition resembles soils from the Descartes (Apollo 16) highlands. However, the low statistical probability for long-distance horizontal transport by impact cratering, together with the relatively high contents of imcompatible elements in 14076,1 suggest that this regolith breccia originated within a few hundred kilometers of the Apollo 14 site. Its compositional resemblance to ferroan anorthosite strengthens the hypothesis that ferroan anorthosite originated as the flotation crust of a global magmasphere.

Jerde, Eric A.↗

Iron mineralogy of a Hawaiian palagonitic soil with Mars-like spectral and magnetic properties

Visible and near-IR spectral data for some palagonitic soils from Mauna Kea, Hawaii, are similar to corresponding spectral data for Mars. It is important to understand the composition, distribution, and mineralogy of the ferric-bearing phases for the best spectral analogues because the correspondence in spectral properties implies that the nature of their ferric-bearing phases may be similar to those on Mars. In order to constrain interpretations of the Martian data, a variety of palagonitic soils should be studied in order to establish to what extent differences in their spectral data correspond to differences in the mineralogy of their ferric-bearing phases. Spectral (350-2100 nm), Mossbauer, magnetic, and some compositional data for one of a suite of Hawaiian palagonitic soils are presented. The soil (HWMK1) was collected below the biologically active zone from the sides of a gully cut at 9000 ft elevation on Mauna Kea. The soil was wet sieved with freon into seven size fractions less than 1 mm.

Morris, Richard V.↗

Evidence for pigmentary hematite on Mars based on optical, magnetic, and Moessbauer studies of superparamagnetic (nanocrystalline) hematite

Samples containing variable amounts of superparamagnetic hematite (sp-Hm) were prepared by a method in which the sp-Hm particles were dispersed throughout larger particles of silica gel, and the optical and magnetic properties of these samples were compared with those of larger-diameter hematite (bulk-Hm). It is shown that the optical properties of sp-Hm are different from those of bulk-Hm. Implications of the results for mineralogical interpretations of spectral data for the Martian surface and its terrestrial analogues are discussed. It is concluded that features resulting from ferric iron in the Martian spectral data and the results of the Viking magnetic properties experiment are both consistent with hematite present as both sp-Hm and bulk-Hm; the hematite particles most likely occur in pigmentary form, i.e., as particles dispersed throughout the volume of a spectrally neutral material.

Morris, Richard V.↗

What ferric oxide/oxyhydroxide phases are present on Mars

The weathering history of Mars can be deduced largely from the mineralogy and distribution of ferric oxide/oxyhydroxide phases. As discussed, some insights can be gained through spectrophotometric remote sensing, but absolute determinations must depend on direct laboratory analysis of returned Martian samples.

Morris, Richard V.↗

A potpourri of regolith breccias - 'New' samples from the Apollo 14, 16, and 17 landing sites

Compositional (by INAA) and petrographic studies were performed among the smaller rocks (not analyzed previously) from the Apollo 14, 16, and 17 sites as part of a search for regolith samples exotic to the small traverse areas associated with these missions. Of the 40 samples studied, 31 were regolith breccias. Among these, three of the Apollo 14 samples proved to be compositionally unique, particularly the 14315 sample, which is radically different from all other Apollo 14 regolith materials (lower Mg and Fe, far higher Al and far lower REE abundances), and is probably exotic to the Apollo 14 traverse area. Among 10 samples from Apollo 17, all but one proved to be typical Apollo 17 regolith breccia. However, the 72504,10 sample is more than 99 percent pure pyroclastic glass, compositionally identical to the Apollo 17 orange glass obtained at a location 4 km away, attesting to the widespread distribution of orange glass deposits.

Jerde, Eric A.↗