Engineering Papers⌕ Search

Engineering topics

Morris, R. V.

Publications and source records attributed to Morris, R. V..

At least 289 records · Page 16

Ferromagnetic resonance intensity - A rapid method for determining lunar glass bead origin

Ferromagnetic resonance intensity, I(s), relies on the absence or presence of single-domain Fe formed during impact melting by autoreduction of Fe(2+) in the melt to distinguish volcanic from impact glass spherules in the lunar soil. SEM inspection of individual glass bead surfaces gave reliable evidence of the mode of glass genesis. Ferromagnetic resonance intensity was tested against the Apollo 15 and 17 volcanics. I(s) values of less than one were found in 94% of the volcanic glasses, implying the absence of single-domain Fe, while 75% of the impact glasses had elevated I(s) values. These samples lack single-domain Fe, and may represent impact melts of bedrock with little or no regolith contribution. Both the primary discrimination of volcanic and impact glasses, and the secondary one of bedrock-derived impact melts from impact melts partially or entirely derived from regolith, have been demonstrated for the I(s) technique.

Stone, C. D.↗

The Apennine Front core 15007/8 - Irradiational and depositional history

The Apennine Front core 15007/8 was subjected to ferromagnetic resonance (FMR), magnetic and noble gas measurements. Ferromagnetic resonance intensity I(s)/FeO surface exposure (maturity) index values and FeO concentrations are reported for 0.5 cm depth intervals, and noble gas and FMR data are given for 13 soils and two clasts selected from various depths in the 57 cm-long core. These data indicate four core units whose contacts are at about 18, 49 and 55 cm. The 0-18 cm unit has cosmogenic Xe-131/Xe-126 values that are higher than underlying soil and indicate irradiation at depths greater than 50 cm, showing it to probably be the ejecta from the crater on whose rim the core was collected. The 18-49 cm unit has relatively constant I(s)/FeO values and cosmogenic gas abundances, and may represent a mixed soil zone. I(s)/FeO drops by 30 units at the 49-cm contact. Comparison of the 15007/8 core to other ones suggests that soils on slopes tend to be mixed and to not contain units with long in situ radiation profiles.

Bogard, D. D.↗

Stability of goethite /alpha-FeOOH/ and lepidocrocite /gamma-FeOOH/ to dehydration by UV radiation - Implications for their occurrence on the Martian surface

The geochemistry of the FeOOH polymorphs is an important consideration when evaluating the likelihood of an occurrence of detectable amounts of these minerals on Mars. An investigation is conducted regarding the stability of the FeOOH polymorphs geothite and lepidocrocite to dehydration in the presence of UV radiation. A thorough characterization of the FeOOH powders used in the laboratory experiments is presented, and the irradiational facility and experimental procedures are described. The results obtained in the conducted experiments are discussed. It is found that there is as yet no basis in laboratory experiments for inferring that perceptible UV photodehydration of FeOOH polymorphs will occur naturally on the surface of Mars on a time scale of at least 10-100 years.

Morris, R. V.↗

Relations between information system engineering and software engineering

This paper examines some of the relations between information system engineering and software engineering. A model for the development process of an information system is presented that focuses on problems common to both disciplines. The concepts of complexity, multiplicity of view, distortion in communication, and concurrency and iteration in implementation are treated. A set of design constructs for the description of an information system is presented. The role of project management is treated. The issue of how to characterize requirements analysis is answered by making it a design activity from the point of view of a user of the product system.

Callender, E. D.↗

An application of computer aided requirements analysis to a real time deep space system

The entire procedure of incorporating the requirements and goals of a space flight project into integrated, time ordered sequences of spacecraft commands, is called the uplink process. The Uplink Process Control Task (UPCT) was created to examine the uplink process and determine ways to improve it. The Problem Statement Language/Problem Statement Analyzer (PSL/PSA) designed to assist the designer/analyst/engineer in the preparation of specifications of an information system is used as a supporting tool to aid in the analysis. Attention is given to a definition of the uplink process, the definition of PSL/PSA, the construction of a PSA database, the value of analysis to the study of the uplink process, and the PSL/PSA lessons learned.

Farny, A. M.↗

The case against UV photostimulated oxidation of magnetite

The kinetics of magnetite oxidation in O2-bearing atmospheres in the presence of electromagnetic radiation was studied. No perceptible oxidation of magnetite by ultraviolet (UV) photostimulation occurred. These results do not corroborate previous conclusions by Huguenin (1973, 1974) as to the occurrence of this process. Therefore, although the possibility that the process actually occurs cannot be ruled out, it is concluded that there is not yet a basis in laboratory experiments for inferring that UV photostimulated oxidation of magnetite occurs naturally on the surface of Mars.

Morris, R. V.↗

Experimental mineral/liquid partition coefficients of the rare earth elements /REE/, Sc and Sr for perovskite, spinel and melilite

Experimental determinations of the mineral/liquid partition coefficients of REE (La, Sm, Eu, Gd, Tb, Yb and Lu), Sc and Sr are reported for the minerals perovskite, spinel and melilite in synthetic systems. Perovskite concentrates light REE with respect to the residual liquid but shows no preference for heavy REE. Spinel greatly discriminates against the incorporation of REE, especially light REE, into its crystal structure. The partition of REE into melilite from a silicate liquid is quite dependent upon both the bulk melt and melilite solid-solution (gehlenite and akermanite components) compositions. As such, melilite can be enriched in REE or will reject REE with corresponding strong negative or strong positive Eu anomalies, respectively.

Nagasawa, H.↗

Depositional and irradiational history of the Hadley Rille core 15010/11

Soils from the 15010/11 double drive tube collected at the edge of Hadley Rille have been analyzed for FeO concentrations, I(s)/FeO maturity index values, and noble gas isotopic abundances. Cosmogenic noble gases indicate a total cosmic ray exposure age of less than about 300 million years for the core soils, and it is found that while the production profile of these gases as a function of depth is not consistent with single-stage, in situ irradiation, it is in keeping with pre-irradiated soils deposited or exposed within the past 100 million years. Although significant isotopic differences due to mass fractionation exist on the lunar surface, the solar noble gases in most core soils show little or no evidence of long-term isotopic changes.

Bogard, D. D.↗

Origins and size distribution of metallic iron particles in the lunar regolith

The metallic iron concentration has been measured in three ranges of metal particle diameters for 79 lunar soils by a combination of static magnetic and ferromagnetic resonance techniques. Based on these measurements, a model has been developed which apportions the total metallic iron content of lunar soils between three components: (1) metallic iron particles produced from the exposure-induced reduction of ferrous iron; they range from 40 to 330 A in diameter and are predominantly associated with agglutinate glass; (2) metallic iron particles derived from the metallic phases of the micrometeorites involved in the formation of agglutinate glass; these particles are mostly greater than 300 A in diameter; and (3) metallic iron particles in the source materials such as bedrock and breccias; these are usually greater than 330 A in diameter. The maximum concentration of metallic iron in lunar regolith is estimated at about 0.7 equiv. wt% in highland regions (approximately 5.0 wt% FeO) and about 1.0 equiv. wt% in mare regions (approximately 15.0 wt% FeO).

Morris, R. V.↗

Characterization and depositional and evolutionary history of the Apollo 17 deep drill core

With a depth resolution of about 0.5 cm, the stratigraphy of the approximately 3 m Apollo 17 deep drill core by measurement of the total FeO concentration is characterized along with the FMR surface exposure (maturity) index Is/FeO, the metallic iron concentration Fe-vsm, and the FMR linewidth delta-H. For stratigraphic characterization, the first two parameters are the most important. Most of the core is characterized by a FeO concentration of approximately 15.5 wt. %; there is a more mafic zone in the upper approximately 75 cm where the maximum FeO concentration is approximately 18.5 wt. %, and a more felsic zone between approximately 225 and 260 cm where the minimum FeO concentration is approximately 14.0%. As indicated by Is/FeO, most of the soil in the core is submature to mature; the only immature zone is located between approximately 20 and 60 cm and is one of the most distinctive features in the core. A two stage model for the depositional and evolutionary history of the Apollo 17 deep drill core is proposed: (1) deposition by one event approximately 110 m.y. ago or deposition by a sequence of closely spaced events initating a maximum of approximately 200 m.y. ago and terminating approximately 110 m.y. ago, (2) in situ reworking (gardening) to a depth of approximately 26 cm in the period between approximately 110 m.y. ago and the present day.

Morris, R. V.↗

FMR and magnetic studies of Luna 24 soils and greater than 1 mm soil particles

Six Luna 24 soils (24077, 24109, 24149, 24174, 24182, 24210), their grain-size separates, and twenty-five greater than 1 mm soil particles were analyzed by ferromagnetic resonance (FMR) and static magnetic techniques. The values of the FMR maturity index for the soils ranged from 19.0 to 39.0 units; soils 24077 and 24109 are submature and soils 24149, 24174, 24182, and 24210 are immature. The metallic iron contents of the soils ranged from 0.30 to 0.51 wt % and are commensurate with their maturities. The 'best estimate' value for the concentration of metallic iron of Luna 24 mare basalts is 0.038 wt %.

Morris, R. V.↗

In situ reworking /gardening/ of the lunar surface - Evidence from the Apollo cores

The in situ reworking (gardening) of the lunar surface by impacting projectiles creates an in situ reworking zone extending horizontally over the entire regolith surface and extending vertically from the surface to a depth which varies from place-to-place on the moon. On the basis of available evidence, the 'high-maturity' zones observed at the top of the lunar cores have resulted from the in situ reworking of the present-day lunar surface. The temporal variation of the in situ reworking depth was investigated using depths inferred from maturity I sub s/FeO and Al-26 profiles of Apollo cores. The observed temporal variation of the in situ reworking depth in units of centimeters is equal to 2.2 times the time (in units of million years) to the 0.45th power.

Morris, R. V.↗

Depositional and surface exposure history of the Shorty Crater core 74001/2 - FMR and magnetic studies

Surface exposure (maturity) indices and concentrations of FeO and metallic iron were determined at 0.5-cm intervals of the Apollo 17 core section, which sampled a pyroclastic deposit on the rim of Shorty Crater. The determinations showed that all of the soil in the core is extremely immature. An exposure history of the core is proposed: accumulation (about 3.6 billion years ago), shallow burial (during the first 20 million years), deep burial (till about 10-15 million years ago), followed by excavation (10-15 million years ago), and in situ reworking (till the present).

Morris, R. V.↗

The surface exposure /maturity/ of lunar soils - Some concepts and I sub s/FeO compilation

Surface exposure (or, equivalently, maturity) indices of lunar soils are a measure of residence time of soil in the upper one millimeter of the regolith. Several concepts concerning the use of and terminology associated with maturity indices are discussed. For reasons which include its generally-applicable nature and large data base, the ferromagnetic resonance (FMR) surface exposure (maturity) index I sub s/FeO (the ratio of the value of the intensity in arbitrary units of the FMR resonance at g equal to about 2.1 to the FeO concentration) is particularly suitable and useful. A compilation of values of I sub s/FeO for 164 Apollo surface and trench soils and six Luna 24 core soils is given.

Morris, R. V.↗

Redox equilibria of multivalent ions in silicate glasses

Experimental studies were made on the compositional dependence of the redox equilibrium of Eu in synthetic silicate liquids, together with an empirical model describing the observed compositional dependence. Electron paramagnetic resonance (EPR) was used to measure the concentration ratio of Eu(2+) to Eu(3+) in various glasses formed by rapidly quenching silicate liquids. The compositional field studied comprised mixtures of SiO2, TiO2, Al2O3, CaO, MgO, and Na2O. The proposed model describes the Eu(2+)/Eu(3+) ratio over the entire compositional field in terms of parameters easily related to each glass composition. The general applicability and utility of the model is further demonstrated by its application to the Fe(2+)-Fe(3+), Ce(3+)-Ce(4+), and Cr(3+)-Cr(6+) redox reactions in binary alkali oxide silicate glasses of Li, Na, and K.

Lauer, H. V., Jr.↗

Nearly pure Apollo 12 KREEP - Soil sample 12023

It is suggested that soil sample 12023, which was collected during the Apollo 12 mission from a 20 cm trench on the east rim of Sharp Crater, matured on a KREEP regolith surface, since its major element chemistry and FMR linewidth are indistinguishable from those of the Fra Mauro (Apollo 14) soils. Attention is given to the distribution of the sample's major mineral components. It is suggested that the origin of 12023 may either be ejecta from Fra Mauro material, or ray material from the Copernicus crater.

Morris, R. V.↗

Depositional history of the Apollo 16 deep drill core

Ferromagnetic resonance and magnetic hysteresis loop measurements were performed on 212 samples from the Apollo 16 deep drill core. The total iron content is generally uniform with a mean value of 5.7 plus or minus 0.9 wt%. The soils range in maturity from immature to mature. Two major contacts were observed. The contact at 13 cm depth represents a fossil surface whereas the contact at 190 cm depth has no time-stratigraphic significance. The data suggest that the core section below 13 cm depth was deposited in a single impact event and subjected to meteoritic gardening for about 450 m.y. However, our data do not preclude deposition by a series of closely spaced events. About 50 m.y. ago, the top 13 cm were added. Comparison with the Apollo 16 double drive tube 60009/60010 does not yield any evidence for a stratigraphic correlation with the deep drill core.

Gose, W. A.↗

Grain size, petrographic, and FMR studies of the double core 60009/10 - A study of soil evolution

Six samples from the upper core 60010 of the double drive core 60009/60010 were analyzed for grain size distribution, petrographic particle types and abundances, magnetic fraction, and ferromagnetic resonance. It was found that the magnetic fraction of these soils is not equivalent to the agglutinate fraction, and magnetic separation partitions high-FeO agglutinate from low-FeO agglutinates. Various maturity indices are in essential agreement. The deposition of most or all of the core could have occurred in a single event. If that is the case, the core units have no time-stratigraphic significance and do not reflect individual cratering events.

Mckay, D. S.↗