An implicit finite-element method for high-speed flows
Explore the source record for details and available documents.
Hassan, O.↗
Engineering topics
Morgan, K.
Publications and source records attributed to Morgan, K..
The computation of three-dimensional flows using unstructured grids
A general method is described for automatically discretizing, into unstructured assemblies of tetrahedra, the three-dimensional solution domains of complex shape which are of interest in practical computational aerodynamics. An algorithm for the solution of the compressible Euler equations which can be implemented on such general unstructured tetrahedral grids is described. This is an explicit cell-vertex scheme which follows a general Taylor-Galerkin philosophy. The approach is employed to compute a transonic inviscid flow over a standard wing and the results are shown to compare favorably with experimental observations. As a more practical demonstration, the method is then applied to the analysis of inviscid flow over a complete modern fighter configuration. The effect of using mesh adaptivity is illustrated when the method is applied to the solution of high speed flow in an engine inlet.
Morgan, K.↗
Adaptive unstructured mesh methods for steady viscous flow
The solution of the equations governing steady laminar viscous flows on unstructured triangular meshes is addressed. The shortcomings of the standard adaptivity approaches for this class of problems are highlighted and a modified method based upon the combined use of mesh enrichment, mesh movement, and adaptive remeshing, is proposed. The behavior of the proposed scheme is demonstrated by applying it in the solution of compression corner flows.
Hassan, O.↗
Finite element methods for integrated aerodynamic heating analysis
This report gives a description of the work which has been undertaken during the second year of a three year research program. The objectives of the program are to produce finite element based procedures for the solution of the large scale practical problems which are of interest to the Aerothermal Loads Branch (ALB) at NASA Langley Research Establishment. The problems of interest range from Euler simulations of full three dimensional vehicle configurations to local analyses of three dimensional viscous laminar flow. Adaptive meshes produced for both steady state and transient problems are to be considered. An important feature of the work is the provision of specialized techniques which can be used at ALB for the development of an integrated fluid/thermal/structural modeling capability.
Morgan, K.↗
Unstructured finite element mesh generation and adaptive procedures for CFD
A method is described for generating unstructured meshes of triangles or tetrahedra for computational domains of complex geometrical shape. To illustrate the power of the approach, it is applied to the solution of flows past several complete aircraft configurations. The advocated approach allows for the natural incorporation of mesh adaptivity and this is demonstrated for both inviscid and viscous computations in two and three dimensions.
Peraire, J.↗
Unstructured mesh methods for CFD
Mesh generation methods for Computational Fluid Dynamics (CFD) are outlined. Geometric modeling is discussed. An advancing front method is described. Flow past a two engine Falcon aeroplane is studied. An algorithm and associated data structure called the alternating digital tree, which efficiently solves the geometric searching problem is described. The computation of an initial approximation to the steady state solution of a given poblem is described. Mesh generation for transient flows is described.
Peraire, J.↗
Applications of an adaptive unstructured solution algorithm to the analysis of high speed flows
An upwind cell-centered scheme for the solution of steady laminar viscous high-speed flows is implemented on unstructured two-dimensional meshes. The first-order implementation employs Roe's (1981) approximate Riemann solver, and a higher-order extension is produced by using linear reconstruction with limiting. The procedure is applied to the solution of inviscid subsonic flow over an airfoil, inviscid supersonic flow past a cylinder, and viscous hypersonic flow past a double ellipse. A detailed study is then made of a hypersonic laminar viscous flow on a 24-deg compression corner. It is shown that good agreement is achieved with previous predictions using finite-difference and finite-volume schemes. However, these predictions do not agree with experimental observations. With refinement of the structured grid at the leading edge, good agreement with experimental observations for the distributions of wall pressure, heating rate and skin friction is obtained.
Thareja, R. R.↗
An implicit finite element method for high speed flows
A fast algorithm is presented for constructing continuous lines, consisting of element sides, on general unstructured two-dimensional triangular meshes. The lines must pass through each node of the mesh once and only once. The discussion focuses on the use of these lines in a relaxation method for the solution of the equation system arising from an implicit algorithm for the solution of two-dimensional Euler and Navier-Stokes equations on general unstructured grids. It is also shown that the method can be used for solving three-dimensional Navier-Stokes equations on a grid composed of both structured and unstructured regions.
Hassan, O.↗
An adaptive implicit/explicit finite element scheme for compressible viscous high speed flow
An adaptive implicit/explicit finite element procedure for the solution of three-dimensional problems of steady compressible viscous high-speed flows is presented. In the vicinity of solid walls, a grid-exhibiting structure in the normal direction is employed, while away from this region the grid is totally unstructured. The implicit form of the algorithm is used near solid walls, with the grid structure being utilized in an equation solution approach based upon line relaxation. The explicit form of the algorithm is used elsewhere. Grid adaptation is achieved by means of adaptive remeshing. To illustrate the performance of the proposed method, solutions are obtained for the problems of shock-boundary layer interaction and shock-shock interaction on a swept cylindrical leading edge. Comparisons are made with experimental observations.
Hassan, O.↗
Adaptive numerical solutions of the Euler equations in 3D using finite elements
The development of an adaptive mesh solution for a flow involving shock interaction on a swept cylinder and an initial solution for a flow past a complex fighter configuration is reported. The finite element solution algorithm, the mesh generation, and the adaptivity of the solution are described. Sample results for the flow past an F-18 configuration at Mach 0.9 and alpha of 3 deg and for shock interaction on a swept cylinder at Mach 8.04 are summarized.
Peraire, J.↗
The simulation of 2D compressible viscous high speed flow by the finite element method
Am implicit/explicit procedure for the solution of problems of two-dimensional steady compressible viscous high-speed flows is presented. In the vicinity of solid walls, a grid which need only exhibit structure in the normal direction is employed while, away from this region, the grid is totally unstructured. The implicit form of the algorithm is used near solid walls, with the grid structure being utilized in an equation solution approach, based upon line relaxation. The explicit form of the algorithm is used elsewhere. Grid adaptation is achieved by means of adaptive remeshing. To illustrate the performance of the proposed method, problems of shock-boundary layer interaction and flow over a simulated forebody at high Mach number are included.
Hassan, O.↗
FEM-FCT - Combining unstructured grids with high resolution
The extension of flux-corrected transport (FCT) schemes to unstructured grids is presented. The spatial discretization is performed via finite elements. In particular, triangular elements in two dimensions have been chosen. The limiting procedure is based on Zalesak's (1979) extension to more than one dimension of the FCT schemes developed by Boris and Book (1973). The resulting scheme, FEM-FCT, is capable of resolving moving and stationary shocks within two elements, and several examples are given that demonstrate the accuracy attainable, even for complicated geometries.
Lohner, R.↗
Finite element solution of the Euler equations in two and three dimensions
The paper presents a finite element procedure for solving the equations of compressible flow over bodies of arbitrary geometry. The numerical solution algorithm employed is an explicit two-step version of a second order Taylor-Galerkin scheme. The discretization of the computational domain into unstructured meshes of triangles in two dimensions and tetrahedra in three dimensions is performed by an automatic mesh generator. In the approach, the mesh generator is coupled to the finite element solver to produce an adaptive remeshing procedure.
Peiro, J.↗
Adaptive remeshing for compressible flow computations
The present, quality-enhancing adaptive-mesh procedure for two-dimensional Euler equation steady state solutions is implemented by means of linear triangular elements and an explicit time-stepping scheme, in conjunction with a finite element solution algorithm. The meshes thus generated typically take the form of stretched elements in the vicinity of one-dimensional flow features; a considerable variation in element size may thereby emerge which allows the desired high-quality solutions to be obtained with commensurately high computational efficiency.
Peraire, J.↗
Unstructured multigrid methods
The use of the multigrid procedure with a sequence of unnested coarser grids is discussed. Validity of the procedure is assessed by considering the solution of a single linear elliptic equation. It is demonstrated how a scheme with the optimum order of operations can be constructed. Application to the solution of the Euler equations is considered.
Loehner, R.↗
Finite element methods for compressible flows
The problems of mesh generation and developing effective algorithms for the solution of the equations of compressible flow on unstructured meshes are discussed. Adaptive mesh refinement methods can be implemented in a straightforward manner. Possible adaptive strategies are examined. A finite element method adapted to problems involving high speed compressible flow is described. The adaptive mesh regeneration procedure appears to offer the possibility of large computational savings in three dimensional flow computation.
Morgan, K.↗
An adaptive finite element method for high speed flows
The solution of the equations of compressible high speed flow, on unstructured triangular grids in 2D and tetrahedral grids in 3D, is considered. Solution methods based upon both Taylor-Galerkin and Runge-Kutta time-stepping techniques are presented and the incorporation of the ideas of flux corrected transport (FCT) is discussed. These methods are combined with an adaptive mesh regeneration procedure and are employed in the solution of several examples, consisting of Euler flows in both 2D and 3D and Navier-Stokes flows in 2D.
Peraire, J.↗
An unstructured multigrid method for elliptic problems
A multigrid algorithm for implementation on unstructured meshes is proposed. The algorithm uses a sequence of unnested grids and requires the development of efficient inter-grid interpolation procedures. It is demonstrated how elliptic problems can be solved in this fashion by using Jacobi smoothers.
Lohner, R.↗