Engineering Papers⌕ Search

Engineering topics

Moore, R. C.

Publications and source records attributed to Moore, R. C..

Tin(II)apatite: Synthesis, Characterization, and Challenge with Pertechnetate - 16194

We will report on the synthesis of stannous apatite and the subsequent reductive capacity attained, using a cerium (IV) titration method. Also reported will be the distribution coefficients derived using a Hanford tank supernatant simulant of 7.8 M sodium with chrome (VI) as a contaminant of concern, as a potential non-isotopic oxy-anion and technetium surrogate for reductive capacity determinations. Pertechnetate will be subjected to reduction using hydroxylamine, glucose and threose. The purpose is to take the first step in laboratory analyses to determine the amount of non-pertechnetate species in Hanford tank waste. A proposed sequestration mechanism will be presented as to why the reacted tin(II)apatite does not release technetium once reacted. SEM and EDS spectra will be presented on the crystalline apatite. Areas of incorporation of the tin(II)apatite will be presented for the Hanford tank waste process. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Reduction And Sequestration Of Pertechnetate To Technetium Dioxide And Protection From Reoxidation

This effort is part of the technetium management initiative and provides data for the handling and disposition of technetium. To that end, the objective of this effort was to challenge tin(lI)apatite (Sn(II)apatite) against double-shell tank 241-AN-105 simulant spiked with pertechnetate (TcO{sub 4}). The Sn(II)apatite used in this effort was synthesized on site using a recipe developed at and provided by Sandia National Laboratories; the synthesis provides a high quality product while requiring minimal laboratory effort. The Sn(ll)apatite reduces pertechnetate from the mobile +7 oxidation state to the non-mobile +4 oxidation state. It also sequesters the technetium and does not allow for re-oxidization to the mobile +7 state under acidic or oxygenated conditions within the tested period of time (6 weeks). Previous work indicated that the Sn(II) apatite can achieve an ANSI leachability index in Cast Stone of 12.8. The technetium distribution coefficient for Sn(lI)apatite exhibited a direct correlation with the pH of the technetium-spiked simulant media.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Historical Cost Curves for Hydrogen Masers and Cesium Beam Frequency and Timing Standards

Historical cost curves were developed for hydrogen masers and cesium beam standards used for frequency and timing calibration in the Deep Space Network. These curves may be used to calculate the cost of future hydrogen masers or cesium beam standards in either future or current dollars. The cesium beam standards are decreasing in cost by about 2.3% per year since 1966, and hydrogen masers are decreasing by about 0.8% per year since 1978 relative to the National Aeronautics and Space Administration inflation index.

Remer, D. S.↗

Open loop digital frequency multiplier

An open loop digital frequency multiplier is described which has a multiplied output synchronized to low frequency clock pulse. The system includes a multistage digital counter which provides a pulse output as a function of an integer divisor. The integer divisor and the timing or counting cycle of the counter are interrelated to the frequency of a clock input. The counting cycle is controlled by a one shot multivibrator which, in turn, is driven by a reference frequency input.

Moore, R. C.↗

Open-loop digital frequency multiplier

Monostable multivibrator is implemented by using digital integrated circuits where multiplier constant is too large for conventional phase-locked-loop integrated circuit. A 400 Hz clock is generated by divide-by-N counter from 1 Hz timing reference.

Moore, R. C.↗