Engineering Papers⌕ Search

Engineering topics

Moore, J.

Publications and source records attributed to Moore, J..

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

An Overview of Electrodynamic Tether Performance in the Jovian System

The Jovian magnetosphere with its strong magnetic field and the rapid rotation of the planet present new opportunities and challenges for the use of electrodynamic tethers. An overview of the basic plasma physics properties of an electrodynamic tether moving through the Jovian magnetosphere is examined. Tether use for both propulsion and power generation are considered. Close to the planet, tether propulsive forces are found to be as high as 50 Newtons and power levels as high as 1 million Watts.

Gallagher, D. L.↗
NASA NTRS1998

Topography of the South Polar Cap and Layered Deposits of Mars: Viking Stereo Grametry at Regional and Local Scales

Layered deposits and residual polar caps on Mars may record the deposition of ice and sediment modulated by periodic climate change. Topographic information relating to layer thicknesses, erosional processes, and formation of dark spirals within these deposits has been sparce or unreliable until the arrival of MOLA in orbit in September 1997. To assist in evaluating these terrains prior to launch and to assess formation and erosion processes in the polar deposits, we have assembled Viking stereo mosaics of the region and have produced the first reliable DEM models of the south polar deposits using automated stereogrammetry tools. Here we report our preliminary topographic results, pending final image pointing updates. The maximum total thickness of the layered deposits in the south polar region is 2.5 km. The thick layered deposits consist of a series of megaterraces. Each terrace is several tens of kilometers wide and is flat or slopes very gently toward the pole. These terraces step downward from a central plateau near the south pole. Terraces are bounded by relatively steep scarps 100-500 meters high that face toward the equator. These scarps correspond to the pattern of dark spirals observed within the residual cap in southern summer, and are interpreted as ice or frost-free surfaces warmed by solar insolation. Several tongue-shaped troughs, with rounded cirquelike heads, are observed near the margins of the deposit. These troughs are 300-600 meters in deep and may be similar to troughs observed in the northern polar deposit.

Schenk, P.↗
NASA NTRS1995

(abstract) Microwave Induced Combustion Synthesis of Ceramic and Ceramic-Metal Composites

We have used microwaves to induce self-propagating high temperature synthesis (SHS) in the reaction 3TiO(sub 2)+3C+(4+x)Al ---> 3TiC+2Al(sub 2)O(sub 3)+xAl. The SHS process was studied for x = 0 and 4, with and without the application of uniaxial pressure. A TE102 microwave cavity mode internally ignited the samples using less than 50 watts. The resultant microstructure of the microwave processed samples were compared to SHS products obtained using a conventional hot wire ignition technique. Uniaxial stresses along the vertical axis of approximately 1400 and 200 psi were applied simultaneously as the SHS reactions were initiated in some of the conventional and microwave processed samples, respectively. SEM photomicrographs will be presented that show the different microstructural features of the products using the microwave and hot wire techniques.

ceramic microwave ceramic-metal composites microwa↗
NASA NTRS1995

Microwave Induced Combustion Synthesis of Ceramic and Ceramic-Metal Composites

In recent years, there has been a renewed interest in combustion synthesis reactions, commonly called self-propagating high-temperature synthesis. These reactions are an attractive, energy efficient approach to the synthesis of high temperature composite materials and metastable phases. Microwaves are used to induce self-propagating high temperature synthesis of ceramic and ceramic-metal composites.

high-temperature ceramics high-temperature synthes↗
NASA NTRS1988

Slotline fed microstrip antenna array modules

A feed network comprised of a combination of coplanar waveguide and slot transmission line is described for use in an array module of four microstrip elements. Examples of the module incorporating such networks are presented as well as experimentally obtained impedance and radiation characteristics.

Lo, Y. T.↗
NASA NTRS1986

Thermodynamic evaluation of transonic compressor rotors using the finite volume approach

A method was developed which calculates two-dimensional, transonic, viscous flow in ducts. The finite volume, time marching formulation is used to obtain steady flow solutions of the Reynolds-averaged form of the Navier Stokes equations. The entire calculation is performed in the physical domain. The method is currently limited to the calculation of attached flows. The features of the current method can be summarized as follows. Control volumes are chosen so that smoothing of flow properties, typically required for stability, is now needed. Different time steps are used in the different governing equations to improve the convergence speed of the viscous calculations. A new pressure interpolation scheme is introduced which improves the shock capturing ability of the method. A multi-volume method for pressure changes in the boundary layer allows calculations which use very long and thin control volumes. A special discretization technique is also used to stabilize these calculations. A special formulation of the energy equation is used to provide improved transient behavior of solutions which use the full energy equation. The method is then compared with a wide variety of test cases. The freestream Mach numbers range from 0.075 to 2.8 in the calculations. Transonic viscous flow in a converging diverging nozzle is calculated with the method; the Mach number upstream of the shock is approximately 1.25. The agreement between the calculated and measured shock strength and total pressure losses is good. Essentially incompressible turbulent boundary layer flow in a adverse pressure gradient is calculated and the computed distribution of mean velocity and shear stress are in good agreement with the measurements. At the other end of the Mach number range, a flat plate turbulent boundary layer with a freestream Mach number of 2.8 is calculated using the full energy equation; the computed total temperature distribution and recovery factor agree well with the measurements when a variable Prandtl number is used through the boundary layer.

Nicholson, S.↗
NASA NTRS1986

Thermodynamic evaluation of transonic compressor rotors using the finite volume approach

The finite volume explicit time marching method was refined and improved. Previously, extension had been made to the finite volume method to improve the accuracy of the calculation of total pressure in inviscid flow, extend the method to allow the calculation of laminar and turbulent boundary layers in internal flows, and improve the shock capturing properties of the method by introducing a Mach number dependent interpolation scheme for the pressure used in the calculating the density. The current work extends these developments by using the new pressure interpolation scheme in two dimensional viscous calculations, including a more complete description of the viscous stresses, introducing a criteria for the transverse upwind differencing which is a function of the ratio of transverse and streamwise mass fluxes, and allowing the calculation of internal flow where boundary layers are present on both walls of the duct. The manner in which the viscous stresses are evaluated in the nonorthogonal, nonuniform grid is detailed. The convergence is investigated and results for calculations of laminar flow in a converging duct are presented. Results for calculations of transonic flow in a converging-diverging nozzle are presented and the results are compared with Sajben's measurements and calculations by others.

Nicholson, S.↗
NASA NTRS1985

Thermodynamic evaluation of transonic compressor rotors using the finite volume approach

Research at NASA Lewis Research Center gave the opportunity to incorporate new control volumes in the Denton 3-D finite-volume time marching code. For duct flows, the new control volumes require no transverse smoothing and this allows calculations with large transverse gradients in properties without significant numerical total pressure losses. Possibilities for improving the Denton code to obtain better distributions of properties through shocks were demonstrated. Much better total pressure distributions through shocks are obtained when the interpolated effective pressure, needed to stabilize the solution procedure, is used to calculate the total pressure. This simple change largely eliminates the undershoot in total pressure down-stream of a shock. Overshoots and undershoots in total pressure can then be further reduced by a factor of 10 by adopting the effective density method, rather than the effective pressure method. Use of a Mach number dependent interpolation scheme for pressure then removes the overshoot in static pressure downstream of a shock. The stability of interpolation schemes used for the calculation of effective density is analyzed and a Mach number dependent scheme is developed, combining the advantages of the correct perfect gas equation for subsonic flow with the stability of 2-point and 3-point interpolation schemes for supersonic flow.

Moore, J.↗
NASA NTRS1985

Growth and differentiation of mammalian embryonic tissues exposed to hypergravity in vivo and in vitro

Decreased cartilage areas in embryonic limbs developing under excess g in vitro, is reported, as well as delayed skeletal development in embryos and fetuses exposed to excess g in utero. 12.5-day mouse limb buds were cultured at 2.6 g, and fixed at two days and six days of culture. In vivo experiments used alizarin-stained 18-day fetuses exposed to 2.3 g. In all studies, cartilage areas were determined using a digitized tablet. Form factor analysis determined that the main effect of in vitro centrifugation was a reduction in length of the limb elements, probably due to the precocious chondrogenesis seen in the upper regions of centrifuged limbs. Similar reductions in length of ossified areas was seen in the in utero studies.

Duke, J.↗
NASA NTRS1985

Thermodynamic evaluation of transonic compressor rotors using the finite volume approach

Progress made in extending the finite volume explicit time marching method to laminar and turbulent flow during the time period from January to May 1985 is documented. Previously, extensions were made to the finite volume method to improve the accuracy of the calculation of total pressure in compressible inviscid flow. The current work extends these ideas and develops new ideas which allow the calculation of laminar and turbulent boundary layers in internal flows. The method is verified using four test cases with free-stream Mach numbers ranging from .075 to 1.20.

Nicholson, S.↗
NASA NTRS1982

Investigation of advanced navigation and guidance system concepts for all-weather rotorcraft operations

Results are presented of a survey conducted of active helicopter operators to determine the extent to which they wish to operate in IMC conditions, the visibility limits under which they would operate, the revenue benefits to be gained, and the percent of aircraft cost they would pay for such increased capability. Candidate systems were examined for capability to meet the requirements of a mission model constructed to represent the modes of flight normally encountered in low visibility conditions. Recommendations are made for development of high resolution radar, simulation of the control display system for steep approaches, and for development of an obstacle sensing system for detecting wires. A cost feasibility analysis is included.

Upton, H. W.↗
NASA NTRS1976

Automatic control of a mobile Viking lander on the surface of Mars

A mobile lander system is being considered for use in a possible follow-on mission to the Viking '75 landings on Mars. A mobile Viking lander, which could be launched as early as the 1979 opportunity, would be capable of traversing 100 m to 1 km per day on a commanded heading while sensing hazards and performing avoidance maneuvers. The degree of autonomous control, and consequently the daily traverse range, is still under study. The mobility concept requires the addition of: (1) track-laying or wheel units in place of the Viking Lander footpads, (2) a set of hazard and navigation sensors, and (3) a mobility control computer capability. The technology required to develop these three subsystems is available today. The principal objective of current design studies, as described in this paper, is to define a mobile lander system that will demonstrate high reliability and fail-safe hazard avoidance while achieving range- and terrain-handling capabilities which satisfy the Mars exploration science requirements.

Moore, J.↗
NASA NTRS1974

Uranus science planning

Recommendations for a 1979 Mariner Jupiter-Uranus mission are discussed with the possibility of launching the first outer planet atmospheric entry probe. Measurement categories considered for the mission include conducting imaging experiments, observations in both the IR and UV spectral range, experiments associated with magnetic fields, plasma, charged particles, and S- and X-band occultation measurements.

Moore, J.↗
NASA NTRS1973

Mission building blocks for outer solar system exploration.

Description of the technological building blocks required for exploring the outer planets with maximum scientific yields under stringent resource constraints. Two generic spacecraft types are considered: the Mariner and the Pioneer. Following a discussion of the outer planet mission constraints, the evolutionary development of spacecraft, probes, and propulsion building blocks is presented. Then, program genealogies are shown for Pioneer and Mariner missions and advanced propulsion systems to illustrate the soundness of a program based on spacecraft modification rather than on the development of new spacecraft for each mission. It is argued that, for minimum costs, technological advancement should occur in an evolutionary manner from mission to mission. While this strategy is likely to result in compromises on specific missions, the realization of the overall objectives calls for an advance commitment to the entire mission series.

Herman, D.↗
NASA NTRS1973

Solution of the stochastic control problem in unbounded domains.

Bellman's dynamic programming equation for the optimal index and control law for stochastic control problems is a parabolic or elliptic partial differential equation frequently defined in an unbounded domain. Existing methods of solution require bounded domain approximations, the application of singular perturbation techniques or Monte Carlo simulation procedures. In this paper, using the fact that Poisson impulse noise tends to a Gaussian process under certain limiting conditions, a method which achieves an arbitrarily good approximate solution to the stochastic control problem is given. The method uses the two iterative techniques of successive approximation and quasi-linearization and is inherently more efficient than existing methods of solution.

Robinson, P.↗
NASA NTRS1969

Information science

Information processing techniques and systems reliability by coding, digital designed methods, retrieval, and communication

Ash, R. B.↗