Engineering topics

Moon, Jaeyun

Publications and source records attributed to Moon, Jaeyun.

4 records

DOE OSTI2024

Metal-organic-framework and walnut shell biochar composites for lead and hexavalent chromium removal from aqueous environments

Extensive research in recent years has explored the realm of porous carbon composites for various applications, including electrochemistry, structural materials, environmental remediation, and more. In particular, the fabrication of porous carbon composites using a metal-organic framework (MOF) and biochar (BC) for aqueous remediation is a fairly new avenue of research. In this study, a MOF-BC composite was synthesized with unmodified and chemically modified BCs using solvothermal synthesis. The composites were used as adsorbents to remediate heavy metals, such as lead (II) and chromium (VI), from aqueous environments. Here, it was verified that the MOF was homogeneously deposited onto the BC's surface using various material characterization techniques. Lead and chromium adsorption studies revealed a high adsorption capacity with greater than 99% removal for lead and ∼65% for chromium, respectively. Impressively, for lead, the highest observed experimental adsorption capacity of the MOF-chemically modified BC composite was 535 mg/g, compared to 240 mg/g for pristine BC. Meanwhile, the adsorption capacity of the same MOF-BC composite for chromium ions was low at 18 mg/g, compared to 80 mg/g for the chemically modified BC. The MOF-BC had a rapid adsorption rate, achieving equilibrium at only 150 min of reaction time for lead ions. MOF-BCs have higher adsorption for cationic lead through physisorption and ion-exchange mechanisms, whereas, for anionic chromium, removal is dominated only by physisorption mechanisms. The outcomes and methodological developments attained in this study offer a novel and compelling approach for synthesizing MOF-BC composites for aqueous remediation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Novel alkali intercalated and acid-exfoliated biochars with enhanced surface areas for contaminant adsorption applications

Cost-effective and eco-friendly adsorbents are essential in environmental engineering and biochar is a promising material from the perspective. A novel and efficient surface modification approach involving alkali intercalation and acid exfoliation was designed in this study to enhance the physicochemical properties of biochar. Here, the alkali intercalation process utilizes potassium hydroxide (KOH), while acid exfoliation involves varying HNO 3 , H 2 SO 4 , and H 3 PO 4 concentrations. A simple two-stage pyrolysis process was employed to facilitate the intercalation-exfoliation modification. The modified biochars were characterized using BET, SEM, XRD, etc., to understand physicochemical properties. To quantify the effectiveness of the modifications, adsorption of malachite green dye as a model moiety was investigated. Dye removal sorption rates exceeding 99 % were recorded in the case of the biochars modified through a two-step process using KOH and 0.1MH 3 PO 4 . Specifically, the highest contaminant removal of 99.9 % was recorded when 60 mg of the KOH-0.1MH 3 PO 4 biochar was employed, which is significantly higher than unmodified biochar’s 45.41 % removal at a higher dosage of 100 mg. Moreover, the adsorption kinetics revealed that all the modified biochars attained the maximum removal concentrations (~99 % removal) in a mere 300 min, indicating a tenfold improvement in adsorption rate from unmodified biochar's requirement of over 5000 min. The results achieved through this study provide a cost-effective, fast, and environment-friendly technology for enhancing the adsorption characteristics and performance of biochars toward contaminant removal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Normal mode description of phases of matter: Application to heat capacity

Understanding thermodynamics in liquids at the atomic level is challenging because of strong atomic interactions and lack of spatial symmetry. Recent prior theoretical works have focused on describing heat capacity of liquids in terms of phonon-like excitations but often rely on fitting factors and assumptions. In this work, we propose characterizing various phases in terms of instantaneous normal modes (INMs) of structural snapshots from molecular dynamics simulations of single-element systems over wide ranges of temperature and pressure. We use the INMs to build a mode-level microscopic description of heat capacity and demonstrate that heat capacity of liquids can be described by a combination of both solidlike and gaslike degrees of freedom, leading to a more unified framework to fundamentally describe heat capacity of all three phases of matter: solid, liquid, and gas. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Atomic dynamics in fluids: Normal mode analysis revisited

Developing microscopic understanding of the thermal properties of liquids is challenging due to their strong dynamic disorder, which prevents characterization of the atomic degrees of freedom. There have been significant research interests in the past few decades to extend the normal mode analysis for solids to instantaneous structures of liquids. However, the nature of normal modes that arise from these unstable structures is still elusive. Here, in this paper, we explore the instantaneous eigenmodes of dynamical matrices of various Lennard-Jones argon liquid and gas systems at high temperatures and show that the normal modes can be interpreted as an interpolation of T →∞ (gas) and T=0 (solid) mode descriptions. We find that normal modes become increasingly collisional and translational, recovering atomistic gaslike behavior rather than vibrational with increase in temperature, suggesting that normal modes in liquids may be described by both solidlike and gaslike modes.

74 ATOMIC AND MOLECULAR PHYSICS↗