Multi-Objective Bayesian Optimization at SLAC MeV-UED
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Mo, M..
Explore the source record for details and available documents.
High-resolution inelastic X-ray scattering is an established technique in the synchrotron community, used to investigate collective low-frequency responses of materials. When fielded at hard X-ray free-electron lasers (XFELs) and combined with high-intensity laser drivers, it becomes a promising technique for investigating matter at high temperatures and high pressures. This technique gives access to important thermodynamic properties of matter at extreme conditions, such as temperature, material sound speed, and viscosity. The successful realization of this method requires the acquisition of many identical laser-pump/X-ray-probe shots, allowing the collection of a sufficient number of photons necessary to perform quantitative analyses. Here, a 2.5-fold improvement in the energy resolution of the instrument relative to previous works at the Matter in Extreme Conditions (MEC) endstation, Linac Coherent Light Source (LCLS), and the High Energy Density (HED) instrument, European XFEL, is presented. Some aspects of the experimental design that are essential for improving the number of photons detected in each X-ray shot, making such measurements feasible, are discussed. A careful choice of the energy resolution, the X-ray beam mode provided by the XFEL, and the position of the analysers used in such experiments can provide a more than ten-fold improvement in the photometrics. The discussion is supported by experimental data on 10 µm-thick iron and 50 nm-thick gold samples collected at the MEC endstation at the LCLS, and by complementary ray-tracing simulations coupled with thermal diffuse scattering calculations.
Here, time-dependent and constituent-specific spectral changes in soft near-edge x-ray absorption spectroscopy (XAS) of an [Fe/MgO] 8 metal/insulator heterostructure after laser excitation are analyzed at the O K-edge with picosecond time resolution. The oxygen absorption edge of the insulator features a uniform intensity decrease of the fine structure at elevated phononic temperatures, which can be quantified by a simple simulation and fitting procedure presented here. Combining XAS with ultrafast electron diffraction measurements and ab initio calculations demonstrates that the transient intensity changes in XAS can be assigned to a transient lattice temperature. Thus, the sensitivity of transient near-edge XAS to phonons is demonstrated.
The radiolysis of water is ubiquitous in nature and plays a critical role in numerous biochemical and technological applications. Although the elementary reaction pathways for the ionized water have been studied, the short-lived intermediate complex and structural dynamic response after the proton transfer reaction remain poorly understood. Here, using liquid-phase ultrafast electron diffraction technique to measure the intermolecular O··O and O··H bonds, we captured the short-lived radical-cation complex OH(H 3 O + ) that was formed within 140 femtoseconds through a direct oxygen-oxygen bond contraction and proton transfer, followed by the radical-cation pair dissociation and the subsequent structural relaxation of water within 250 femtoseconds. These measurements provide direct evidence of capturing this metastable radical-cation complex before separation, thereby improving our fundamental understanding of elementary reaction dynamics in ionized liquid water.
The element specificity of soft x-ray spectroscopy makes it an ideal tool for analyzing the microscopic origin of ultrafast dynamics induced by localized optical excitation in metal-insulator heterostructures. As such, using [Fe/MgO]$_n$ as a model system, we perform ultraviolet pump/soft x-ray probe experiments, which are sensitive to all constituents of these heterostructures, to probe both electronic and lattice excitations. Complementary ultrafast electron diffraction experiments independently analyze the lattice dynamics of the Fe constituent, and together with ab initio calculations yield comprehensive insight into the microscopic processes leading to local relaxation within a single constituent or nonlocal relaxation between two constituents. Besides electronic excitations in Fe, which are monitored at the Fe L 3 absorption edge and relax within 1 ps by electron-phonon coupling, soft x-ray analysis identifies a change at the oxygen K absorption edge of theMgO layers which occurs within 0.5 ps. This ultrafast energy transfer across the Fe-MgO interface is mediated by high-frequency, interface vibrational modes, which are excited by hot electrons in Fe and couple to vibrations in MgO in a mode-selective, nonthermal manner. A second, slower timescale is identified at the oxygen K pre-edge and the Fe L 3 edge. The slower process represents energy transfer by acoustic phonons and contributes to thermalization of the entire heterostructure. We thus find that the interfacial energy transfer is associated with nonequilibrium behavior in the phonon system. Because our experiments lack signatures of charge transfer across the interface, we conclude that phonon-mediated processes dominate the competition of electronic and lattice excitations in these nonlocal, nonequilibrium dynamics.
Monomers and dimers of spherical gold nanoparticles (NPs) exhibit highly uniform plasmonic properties at the single-particle level due to their high structural homogeneity (precision plasmonics). Recent investigations in precision plasmonics have largely focused on static properties using conventional techniques such as transmission electron microscopy and optical dark-field microscopy. Here in this Feature Article, we first highlight the application of femtosecond time-resolved electron diffraction for monitoring the nonequilibrium dynamics of spherical gold NPs after ultrafast optical excitation. The analysis of the transient diffraction patterns allows us to directly obtain quantitative information on the incoherent excitation of the lattice, that is, heating upon electron–lattice equilibration, as well as on the development of strain due to lattice expansion on picosecond time scales. The controlled assembly of two spherical gold NPs into a dimer with a few nanometers gap leads to unique optical properties. Specifically, extremely high electric fields (hot spot) in the gap are generated upon resonant optical excitation. Conventional optical microscopy cannot spatially resolve this unique hot spot due to the optical diffraction limit. We therefore employed nonlinear photoemission electron microscopy to visualize hot spots in single dimers of spherical gold NPs. A quantitative comparison of different single dimers confirms the homogeneity of the hot spots on the single-particle level. Finally, overall, these initial results are highly encouraging because they pave the way to investigate nonequilibrium dynamics in highly uniform plasmonic nanostructures at the time and space limits.
We present a new measurement of lattice disassembly times in femtosecond-laser-heated polycrystalline Au nanofoils. The results are compared with molecular dynamics simulations incorporating a highly optimized, embedded-atom-method interatomic potential. For absorbed energy densities of 0.9 – 4.3 MJ / kg , the agreement between the experiment and simulation reveals a single-crystal-like behavior of homogeneous melting and corroborates the applicability of the interatomic potential in the nonequilibrium warm dense matter regime. For energy densities below 0.9 MJ / kg , the measurement is consistent with nanocrystal behavior where melting is initiated at the grain boundaries.
We apply time-resolved MeV electron diffraction to study the electron-lattice energy relaxation in thin film Au-insulator heterostructures. Through precise measurements of the transient Debye-Waller-factor, the mean-square atomic displacement is directly determined, which allows to quantitatively follow the temporal evolution of the lattice temperature after short pulse laser excitation. Data obtained over an extended range of laser fluences reveal an increased relaxation rate when the film thickness is reduced or the Au-film is capped with an additional insulator top-layer. This behavior is attributed to a cross-interfacial coupling of excited electrons in the Au film to phonons in the adjacent insulator layer(s). Analysis of the data using the two-temperature-model taking explicitly into account the additional energy loss at the interface(s) allows to deduce the relative strength of the two relaxation channels.
Abstract Not Provided
Energy loss in the transport of a beam of relativistic electrons in warm dense aluminum is measured in the regime of ultrahigh electron beam current density over 2 × 10 11 A/cm 2 (time averaged). Furthermore, the samples are heated by shock compression. Comparing to undriven cold solid targets, the roles of the different initial resistivity and of the transient resistivity (upon target heating during electron transport) are directly observable in the experimental data, and are reproduced by a comprehensive set of simulations describing the hydrodynamics of the shock compression and electron beam generation and transport. We measured a 19% increase in electron resistive energy loss in warm dense compared to cold solid samples of identical areal mass.