Engineering Papers⌕ Search

Engineering topics

Mitchell, G. A.

Publications and source records attributed to Mitchell, G. A..

36 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Pressure activated stability-bypass-control valves to increase the stable airflow range of a Mach 2.5 inlet with 40 percent internal contraction

The throat of a Mach 2.5 inlet with a coldpipe termination was fitted with a stability-bypass system. The inlet stable airflow range provided by various stability-bypass entrance configurations in alternate combination with several stability-bypass exit controls was determined for both steady-state conditions and internal transient pulses. Transient results were also obtained for the inlet with a choke point at the diffuser exit. Instart angles of attack were determined for the various stability-bypass entrance configurations. The response of the inlet-coldpipe system to internal and external oscillating disturbances was determined. Poppet valves at the stability-bypass exit provided an inlet stable airflow range of 28 percent or greater at all static and transient conditions.

Mitchell, G. A.↗
NASA NTRS1974

Airflow control system for supersonic inlets

In addition to fixed and variable bleed devices provided for controlling the position of a terminal shock wave in a supersonic inlet, a plurality of free piston valves are disposed around the periphery of a cowling of a supersonic engine inlet. The free piston valves are disposed in dump passageways, each of which begin at a bleed port in the cowling that is located in the throat region of the inlet, where the diameter of the centerbody is near maximum, and terminates at an opening in the cowling adjacent a free piston valve. Each valve is controlled by reference pressure.

Mitchell, G. A.↗
NASA NTRS1973

Throat-bypass bleed systems for increasing the stable airflow range of a Mach 2.50 axisymmetric inlet with 40-percent internal contraction

The results of an experimental investigation to increase the stable airflow range of a super sonic mixed-compression inlet are presented. Various throat-bypass bleeds were located on the inlet cowl. The bleed types were distributed porous normal holes, a forward slanted slot, or distributed educated slots. Large inlet stability margins were obtained with the inlet throat bleed systems if a constant pressure was maintained in the throat-bypass bleed plenum. Stability limits were determined for steady-state and limited transient internal air flow changes. Limited unstart angle-of-attack data are presented.

Sanders, B. W.↗
NASA NTRS1973

Preliminary investigation of inlet ingestion of a wing tip vortex

An inlet-coldpipe assembly was placed in a Mach 0.4 stream to ingest the tip vortex of a forward mounted wing. The strongest vortex was produced by a wing angle of attack of 11 degrees. The vortex displayed a tangential velocity of 57 percent of local stream velocity prior to entering the inlet, and a tangential velocity of 25 percent of local velocity at the simulated compressor-face. The total-pressure profiles measured by standard compressor-face rakes were changed by the presence of the vortex only at the highest tested inlet mass-flow ratios.

Mitchell, G. A.↗