Engineering Papers⌕ Search

Engineering topics

Miller, Sean T.

Publications and source records attributed to Miller, Sean T..

An implicit-in-time DPG formulation of the 1D1V Vlasov-Poisson equations

Efficient solution of the Vlasov equation, which can be up to six-dimensional, is key to the simulation of many difficult problems in plasma physics. The discontinuous Petrov-Galerkin (DPG) finite element methodology provides a framework for the development of stable (in the sense of Ladyzhenskaya–Babuška–Brezzi conditions) finite element formulations, with built-in mechanisms for adaptivity. While DPG has been studied extensively in the context of steady-state problems and to a lesser extent with space-time discretizations of transient problems, relatively little attention has been paid to time-marching approaches. In the present work, we study a first application of time-marching DPG to the Vlasov equation, using backward Euler for a Vlasov-Poisson discretization. We demonstrate adaptive mesh refinement for two problems: the two-stream instability problem, and a cold diode problem. Furthermore, we believe the present work is novel both in its application of unstructured adaptive mesh refinement (as opposed to block-structured adaptivity, which has been studied previously) in the context of Vlasov-Poisson, as well as in its application of DPG to the Vlasov-Poisson system. We also discuss extensive additions to the Camellia library in support of both the present formulation as well as extensions to higher dimensions, Maxwell equations, and space-time formulations.

97 MATHEMATICS AND COMPUTING↗

Fluid-Kinetic Coupling: Advanced Discretizations for Simulations on Emerging Heterogeneous Architectures (LDRD FY20-0643)

Plasma physics simulations are vital for a host of Sandia mission concerns, for fundamental science, and for clean energy in the form of fusion power. Sandia's most mature plasma physics simulation capabilities come in the form of particle-in-cell (PIC) models and magnetohydrodynamics (MHD) models. MHD models for a plasma work well in denser plasma regimes when there is enough material that the plasma approximates a fluid. PIC models, on the other hand, work well in lower-density regimes, in which there is not too much to simulate; error in PIC scales as the square root of the number of particles, making high-accuracy simulations expensive. Real-world applications, however, almost always involve a transition region between the high-density regimes where MHD is appropriate, and the low-density regimes for PIC. In such a transition region, a direct discretization of Vlasov is appropriate. Such discretizations come with their own computational costs, however; the phase-space mesh for Vlasov can involve up to six dimensions (seven if time is included), and to apply appropriate homogeneous boundary conditions in velocity space requires meshing a substantial padding region to ensure that the distribution remains sufficiently close to zero at the velocity boundaries. Moreover, for collisional plasmas, the right-hand side of the Vlasov equation is a collision operator, which is non-local in velocity space, and which may dominate the cost of the Vlasov solver. The present LDRD project endeavors to develop modern, foundational tools for the development of continuum-kinetic Vlasov solvers, using the discontinuous Petrov-Galerkin (DPG) methodology, for discretization of Vlasov, and machine-learning (ML) models to enable efficient evaluation of collision operators. DPG affords several key advantages. First, it has a built-in, robust error indicator, allowing us to adapt the mesh in a very natural way, enabling a coarse velocity-space mesh near the homogeneous boundaries, and a fine mesh where the solution has fine features. Second, it is an inherently high-order, high-intensity method, requiring extra local computations to determine so-called optimal test functions, which makes it particularly suited to modern hardware in which floating-point throughput is increasing at a faster rate than memory bandwidth. Finally, DPG is a residual-minimizing method, which enables high-accuracy computation: in typical cases, the method delivers something very close to the $L^2$ projection of the exact solution. Meanwhile, the ML-based collision model we adopt affords a cost structure that scales as the square root of a standard direct evaluation. Moreover, we design our model to conserve mass, momentum, and energy by construction, and our approach to training is highly flexible, in that it can incorporate not only synthetic data from direct-simulation Monte Carlo (DSMC) codes, but also experimental data. We have developed two DPG formulations for Vlasov-Poisson: a time-marching, backward-Euler discretization and a space-time discretization. We have conducted a number of numerical experiments to verify the approach in a 1D1V setting. In this report, we detail these formulations and experiments. We also summarize some new theoretical results developed as part of this project (published as papers previously): some new analysis of DPG for the convection-reaction problem (of which the Vlasov equation is an instance), a new exponential integrator for DPG, and some numerical exploration of various DPG-based time-marching approaches to the heat equation. As part of this work, we have contributed extensively to the Camellia open-source library; we also describe the new capabilities and their usage. We have also developed a well-documented methodology for single-species collision operators, which we applied to argon and demonstrated with numerical experiments. We summarize those results here, as well as describing at a high level a design extending the methodology to multi-species operators. We have released a new open-source library, MLC, under a BSD license; we include a summary of its capabilities as well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neural-network based collision operators for the Boltzmann equation

Kinetic gas dynamics in rarefied and moderate-density regimes have complex behavior associated with collisional processes. These processes are generally defined by convolution integrals over a high-dimensional space (as in the Boltzmann operator), or require evaluating complex auxiliary variables (as in Rosenbluth potentials in Fokker-Planck operators) that are challenging to implement and computationally expensive to evaluate. In this work, we develop a data-driven neural network model that augments a simple and inexpensive BGK collision operator with a machine-learned correction term, which improves the fidelity of the simple operator with a small overhead to overall runtime. The composite collision operator has a tunable fidelity and, in this work, is trained using and tested against a direct-simulation Monte-Carlo (DSMC) collision operator.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Plasma Modeling Hierarchy and Verification Approach

This report reviews a hierarchy of formal mathematical models for describing plasma phenomena. Starting with the Boltzmann equation, a sequence of approximations and modeling assumptions can be made that progressively reduce to the equations for magnetohydrodynamics. Understanding the assumptions behind each of these models and their mathematical form is essential to appropriate use of each level of the hierarchy. A sequence of moment models of the Boltzmann equation are presented, then focused into a generalized three-fluid model for neutral species, electrons, and ions. This model is then further reduced to a two-fluid model, for which Braginskii described a useful closure. Further reduction of the two-fluid model yields a Generalized Ohm's Law model, which provides a connection to magnetohydrodynamic approaches. A verification approach based on linear plasma waves is presented alongside the model hierarchy, which is intended as an initial and necessary but not sufficient step for verification of plasma models within this hierarchy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

IMEX and exact sequence discretization of the multi-fluid plasma model

Multi-fluid plasma models, where an electron fluid is modeled in addition to multiple ion and neutral species as well as the full set of Maxwell's equations, are useful for representing physics beyond the scope of classic MHD. This advantage presents challenges in appropriately dealing with electron dynamics and electromagnetic behavior characterized by the plasma and cyclotron frequencies and the speed of light. For physical systems, such as those near the MHD asymptotic regime, this requirement drastically increases runtimes for explicit time integration even though resolving fast dynamics may not be critical for accuracy. Implicit time integration methods, with efficient solvers, can help to step over fast time-scales that constrain stability, but do not strongly influence accuracy. As an extension, Implicit-explicit (IMEX) schemes provide an additional mechanism to choose which dynamics are evolved using an expensive implicit solve or resolved using a fast explicit solve. In this study, in addition to IMEX methods we also consider a physics compatible exact sequence spatial discretization. Here, this combines nodal bases (H-Grad) for fluid dynamics with a set of vector bases (H-Curl and H-Div) for Maxwell's equations. This discretization allows for multi-fluid plasma modeling without violating Gauss' laws for the electric and magnetic fields. This initial study presents a discussion of the major elements of this formulation and focuses on demonstrating accuracy in the linear wave regime and in the MHD limit for both a visco-resistive and a dispersive ideal MHD problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final Reports from the Los Alamos National Laboratory Computational Physics Student Summer Workshop

The two primary purposes of LANL’s Computational Physics Student Summer Workshop are (1) To educate graduate and exceptional undergraduate students in the challenges and applications of computational physics of interest to LANL, and (2) Entice their interest toward those challenges. Computational physics is emerging as a discipline in its own right, combining expertise in mathematics, physics, and computer science. The mathematical aspects focus on numerical methods for solving equations on the computer as well as developing test problems with analytical solutions. The physics aspects are very broad, ranging from low-temperature material modeling to extremely high temperature plasma physics, radiation transport and neutron transport. The computer science issues are concerned with matching numerical algorithms to emerging architectures and maintaining the quality of extremely large codes built to achieve multi-physics calculations. Although graduate programs associated with computational physics are emerging, it is apparent that the pool of U.S. citizens in this multidisciplinary field is relatively small and is typically not focused on the aspects that are of primary interest to LANL. Furthermore, more structured foundations for LANL interaction with universities in computational physics is needed; currently interactions rely almost solely on individuals’ personalities and personal contacts. Thus a tertiary purpose of the Summer Workshop is to build an educational network of LANL researchers, university professors, and emerging students to advance the field and LANL’s involvement in it. This was the second year for the Summer Workshop. Like the previous year, the workshop’s goals were achieved by bringing into LANL a select group of students recruited from across the United States and immersing them for ten weeks in lectures and interesting research projects. The lectures provided an overview of the computational physics topics of interest this year along with some detailed instruction while the projects gave the students a positive experience accomplishing technical goals. Each team consisted of two students working under one or more mentors from LANL on specific research projects associated with predefined topics. This year, the topics were on verification of simulations in plasma and radiation-hydrodynamics codes, hypervelocity material deformation, plasma physics, graphical processor unit (“GPU”) programming, multi-material mixing, turbulence modeling, computational material science, and electromagnetic pulse simulations. The students’ growth was furthered by their participation on teams where their teammates were sometimes of different academic rank. It also developed them by requiring them to produce written and oral reports that they presented to peers, mentors, and management.

97 MATHEMATICS AND COMPUTING↗

Development of ICF Mix Code

Our project over the summer of 2012 was to develop an ICF mix code. The code we developed is a simplified arbitrary Lagrange Eulerian (ALE) method written from scratch in C++ and is designed to run on unstructured grids. We have performed initial verification of our code, comparing to analytical solutions of a Sod-like shock tube problem and the Sedov blast wave problem. The code was then extended to 2D and verified with respect to the 1D solutions. We also show the capability of our code to handle turbulent instabilities, such as Richtmyer-Meshkov (RM), which are commonplace within ICF experiments. Finally we present an ICF-like initial condition setup in our 1D Lagrange Hydro code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗