Engineering Papers⌕ Search

Engineering topics

Miller, R.

Publications and source records attributed to Miller, R..

50 records · Page 3

Sea level response to wind forcing in the tropical Atlantic

The circulation of the warm-water layer of the tropical Atlantic varies seasonally. This predominant signal is imposed by the annual migration of the Intertropical Covergence Zone separating two trade-wind regimes. As the migration varies interannually, so does the ocean circulation. A long-time objective of climate studies is to understand this interannual variability: to define its range, to fully explain the causal relationship between wind and ocean response, and eventually to understand how the resulting changes in sea surface temperature affect the wind field itself. Our initial objective is to observe and model the oceanic response.

Katz, Eli Joel↗

Design of a Solar Sail Mission to Mars

A new area of interest in space vehicles is the solar sail. Various applications for which it has been considered are attitude control of satellites, focusing light on the jungles of Vietnam, and a Halley's comet rendezvous. Although for various reasons these projects were never completed, new interest in solar sails has arisen. The solar sail is an alternative to the rocket-propelled space vehicle as an interplanetary cargo vehicle, and manufacture of solar sails on the space station is a possibility. Solar sails have several advantages over rockets, including an unlimited power supply and low maintenance. The purpose of this project is to design a solar sail mission to Mars. The spacecraft will efficiently journey to Mars powered only by a solar sail. The vehicle weighs 487.16 kg and will be launchable on an expendable launch vehicle. The project includes an investigation of options to minimize cost, weight, and flight duration. The design of the sail and its deployment system are a major part of the project, as is the actual mission planning. Various topics researched include solar power, material, space environment, thermal control, trajectories, and orbit transfer. Various configurations are considered in order to determine the optimal structure. Another design consideration is the control system of the vehicle. This system includes the attitude control and the communication system of the sail. This project will aid in determining the feasibility of a solar sail and will raise public interest in space research.

Feaux, K.↗

Analytical investigation of rotor wake formation and geometry

A number of refinements in the computer code were worked out and tested. Three codes have been written to date. One program is for an isolated wing and is being used to compare with data for the vortex wake (Weston). The second code is for an isolated wing with a streamwise vortex passing above it. This program is being used to validate the computational procedure for incorporating the vortex into the Euler equation calculations. The third program is the hovering rotor code which is the overall objective of the research. The optimization calculations for a hovering helicopter rotor have been completed.

Miller, R.↗

Wind Loads on Flat Plate Photovoltaic Array Fields

The aerodynamic forces resulting from winds acting on flat plate photovoltaic arrays were investigated. Local pressure distributions and total aerodynamic forces on the arrays are shown. Design loads are presented to cover the conditions of array angles relative to the ground from 20 deg to 60 deg, variable array spacings, a ground clearance gap up to 1.2 m (4 ft) and array slant heights of 2.4 m (8 ft) and 4.8 m (16 ft). Several means of alleviating the wind loads on the arrays are detailed. The expected reduction of the steady state wind velocity with the use of fences as a load alleviation device are indicated to be in excess of a factor of three for some conditions. This yields steady state wind load reductions as much as a factor of ten compared to the load incurred if no fence is used to protect the arrays. This steady state wind load reduction is offset by the increase in turbulence due to the fence but still an overall load reduction of 2.5 can be realized. Other load alleviation devices suggested are the installation of air gaps in the arrays, blocking the flow under the arrays and rounding the edges of the array. A wind tunnel test plan to supplement the theoretical study and to evaluate the load alleviation devices is outlined.

Miller, R.↗

The diffuse X-ray background spectrum from 3 to 50keV

The spectrum of the extragalactic diffuse X-ray background was measured with the GSFC cosmic X-ray experiment on HEAO-1 for regions of the sky away from known point sources and more than 20 deg from the galactic plane. A total exposure of 80 sq m-sec-sr is available at present. Free-free emission from an optically thin plasma of 40 plus or minus 5 keV provides an excellent description of the observed spectrum from 3 to 50 keV. This spectral shape is confirmed by measurements from 5 separate layers of three independent detectors. With an estimated absolute precision of about 10 percent, the intensity of the emission at 10 keV is 3.2 keV/keV-sq cm-sec-sr, a value consistent with the average of previously reported spectra. No other spectral features, such as iron line emission, are evident. This spectrum is not typical of known extragalactic objects. A uniform hot intergalactic medium of approximately 36 percent of the closure density of the universe would produce such a flux, although non-uniform models indicating less total matter are probably more realistic.

Marshall, F. E.↗

The High Energy Astronomy Observatory X-ray Telescope

The High Energy Astronomy Observatory-Mission B (HEAO-B) is a satellite observatory for the purpose of performing a detailed X-ray survey of the celestial sphere. Measurements will be made of stellar radiation in the range 0.2 through 20 keV. The primary viewing requirement is to provide final aspect solution and internal alignment information to correlate an observed X-ray image with the celestial sphere to within one-and-one-half arc seconds. The Observatory consists of the HEAO Spacecraft together with the X-ray Telescope. The Spacecraft provides the required attitude control and determination system, data telemetry system, space solar power system, and interface with the launch vehicle. The X-ray Telescope includes a high resolution mirror assembly, optical bench metering structure, X-ray detectors, detector positioning system, detector electronics and aspect sensing system.

Miller, R.↗

Biaxial prestressing of brittle materials

Strengthening of chemically consolidated zirconia with tungsten fibers, graphite fibers, sapphire whiskers, and silicon carbide whiskers is investigated. Addition of silicon carbide whiskers gives the highest increase in strength of zirconia at room and elevated temperatures. Prestressing with tungsten cables increases tensile strength and ductility

Greszczuk, L.↗