Engineering Papers⌕ Search

Engineering topics

Miller, Keith

Publications and source records attributed to Miller, Keith.

Opportunities to Reuse and Recycle Redundant Radioisotopes - 16023

Sixty plus years of nuclear research and operation in the UK has produced significant quantities of nuclear material. To those involved in decommissioning a site or facility, this material represents a liability that needs to be managed and eventually disposed of. However to those in the wider nuclear industry and supply chain, the radioisotopes represent a potential resource of valuable, and in some cases irreplaceable material for future work. There is therefore an opportunity to create a win-win by identifying material that could be recycled or reused, removing it from being a liability and creating value from what is considered a waste. The UK is currently focused on the clean up of nuclear sites and the safe disposal of legacy nuclear material. Whilst the bulk of legacy material on these sites is mixed wastes in various solid and liquid forms, some of it consists of material produced for research purposes in the form of radioisotopes or exotic fuels. This has resulted in a plethora of unirradiated and irradiated materials in store across the UK including: Depleted and natural Uranium, Enriched Uranium, Mixed U/Pu oxides, Uranium carbide and mixed U/Pu carbides, Thorium as metal and oxides, Research radioisotopes. The material exists in almost every conceivable state from pure metal and oxides to solutions. Some material is well characterised and free from extraneous debris, other material is poorly characterised and contaminated with chemicals, experimental residues and sweepings. In addition, to reduce the risk and potential hazard across the UK there has also been a period of consolidation of obsolete radioactive sources from a wide variety of industrial or medical facilities to secure storage within a licensed site. The waste hierarchy is an established principle for the management of wastes, radioactive or otherwise. Its principles are set out and it gives top priority to prevention in the first place. Where waste is produced, it gives priority to preparation for re-use, then recycling before consideration for disposal as a last resort. The term wastes may only be applicable to the owner of the material where they may view the material as unwanted, unusable, or a by-product. It does not necessarily follow that the material is a waste to all potential owners. Therefore it is important to consider the potential value of material before it is considered for disposal since there is a significant and growing market for radioisotopes across the world. This paper will outline some of the opportunities in the UK for the recycle of surplus radioisotopes and orphan material. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Use of Thorium within the Nuclear Power Industry - 13472

Thorium is 3 to 4 times more abundant than uranium and is widely distributed in nature as an easily exploitable resource in many countries. Unlike natural uranium, which contains ∼0.7% fissile {sup 235}U isotope, natural thorium does not contain any fissile material and is made up of the fertile {sup 232}Th isotope only. Therefore thorium and thorium-based fuel as metal, oxide or carbide, has been utilized in combination with fissile {sup 235}U or {sup 239}Pu in nuclear research and power reactors for conversion to fissile {sup 233}U, thereby enlarging fissile material resources. During the pioneering years of nuclear energy, from the mid 1950's to mid 1970's, there was considerable interest worldwide to develop thorium fuels and fuel cycles in order to supplement uranium reserves. Thorium fuels and fuel cycles are particularly relevant to countries having large thorium deposits but very limited uranium reserves for their long term nuclear power programme. The feasibility of thorium utilization in high temperature gas cooled reactors (HTGR), light water reactors (LWR), pressurized heavy water reactors (PHWRs), liquid metal cooled fast breeder reactors (LMFBR) and molten salt breeder reactors (MSBR) were demonstrated. The initial enthusiasm for thorium fuels and fuel cycles was not sustained among the developing countries later, due to new discovery of uranium deposits and their improved availability. However, in recent times, the need for proliferation-resistance, longer fuel cycles, higher burnup, and improved waste form characteristics, reduction of plutonium inventories and in situ use of bred-in fissile material has led to renewed interest in thorium-based fuels and fuel cycles. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Using Dynamic Sensitivity Analysis to Assess Testability

This paper discusses sensitivity analysis and its relationship to random black box testing. Sensitivity analysis estimates the impact that a programming fault at a particular location would have on the program's input/output behavior. Locations that are relatively \"insensitive" to faults can render random black box testing unlikely to uncover programming faults. Therefore, sensitivity analysis gives new insight when interpreting random black box testing results. Although sensitivity analysis is computationally intensive, it requires no oracle and no human intervention.

Voas, Jeffrey↗