Engineering Papers⌕ Search

Engineering topics

Miller, J.

Publications and source records attributed to Miller, J..

172 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

The Alaska synthetic aperture radar (SAR) facility project

A receiving station for the acquisition and processing of spaceborne synthetic aperture radar (SAR) data is being established by the National Aeronautics and Space Administration (NASA) at the University of Alaska, Fairbanks. The data that will be received from a number of SAR satellites that are to be launched starting in 1990 will allow U.S. researchers to study sea ice, oceanographic and geological features, hydrological processes, glaciers, and vegetation cover in Alaska and its surrounding seas.

Carsey, F.↗
NASA NTRS1986

Chemical Bonding Technology: Direct Investigation of Interfacial Bonds

This is the third Flat-Plate Solar Array (FSA) Project document reporting on chemical bonding technology for terrestrial photovoltaic (PV) modules. The impetus for this work originated in the late 1970s when PV modules employing silicone encapsulation materials were undergoing delamination during outdoor exposure. At that time, manufacturers were not employing adhesion promoters and, hence, module interfaces in common with the silicone materials were only in physical contact and therefore easily prone to separation if, for example, water were to penetrate to the interfaces. Delamination with silicone materials virtually vanished when adhesion promoters, recommended by silicone manufacturers, were used. The activities related to the direct investigation of chemically bonded interfaces are described.

Koenig, J. L.↗
NASA NTRS1986

Thermal conductivity of pristine and brominated P-100 fibers

Thermal conductivity of brominated and pristine Union Carbide P-100 graphite fibers in the 30 to 160 C temperature range was determined by measuring thermal conductivities of graphite fiber epoxy composite samples and then excluding the epoxy contribution. A comparative thermal conductivity instrument was used to measure the thermal conductivity of the samples containing fibers. Results showed that the thermal conductivity values were 225 to 370 w/m-K and 215 to 340 w/m-K for pristine and brominated fibers, respectively. Furthermore, the thermal conductivity ratio of brominated to pristine P-100 fibers was 0.89, 0.91, and 0.92 at 55 to 80 C; 108 and 130 C, respectively. Such decrease in thermal conductivity results almost entirely from the 10 percent increase in fiber cross sectional area due to bromination. This result suggests that bromination effects on P-100 fiber structure is small, and that some structural changes, presumably the sharp-angled domain wall becomes less sharp, occurring in the 80 to 108 C temperature range.

Hung, C. C.↗
NASA NTRS1985

Measuring Rind Thickness on Polyurethane Foam

Nondestructive test determines rind thickness of polyurethane foam. Surface harness of foam measured by Shore durometer method: hardness on Shore D scale correlates well with rind thickness. Shore D hardness of 20, for example, indicates rind thickness of 0.04 inch (1 millimeter). New hardness test makes it easy to determine rind thickness of sample nondestructively and to adjust fabrication variables accordingly.

Johnson, C.↗
NASA NTRS1984

User's guide for SBUV/TOMS ozone derivative products

A series of products are available derived from the total-ozone and ozone vertical profile results for the Solar Backscattered Ultraviolet/Total-Ozone Mapping Spectrometer (SBUV/TOMS) Nimbus-7 operation. Products available are (1) orbital height-latitude cross sections of the SBUV profile data, (2) daily global total ozone contours in polar coordinates, (3) daily averages of total ozone in global 5x5 degree latitude-longitude grid, (4) daily, monthly and quarterly averages of total ozone and profile data in 10 degree latitude zones, (5) tabular presentation of zonal means, (6) daily global total ozone and profile contours in polar coordinates. The ""Derivative Products User's Guide'' describes each of these products in detail, including their derivation and presentation format. Information is provided on how to order the tapes and microfilm from the National Space Science Data Center.

Fleig, A. J.↗
NASA NTRS1983

Power System Considerations and Test Activities

The potential benefits of an IPACS system compared to NiCd and/or Regen Fuel Cell systems are summarized. The benefits are: (1) significant life cycle cost savings; (2) total weight to orbit savings (30 yrs) as much as 10 times; (3) end to end efficiency increase results in approximately 10 kW reduction in array size(6%); (4) motor/generator controller regulation during discharge simplifies distribution system; and (5) momentum stored for attitude control increased by 4 times.

Miller, J.↗
NASA NTRS1980

Report of convective phenomena team

A group meeting was assembled to focus on the planning of specific experiments, to establish some priorities, identify interested scientists who would like to participate, establish any special requirements, make recommendations on data processing, and to prepare flight plan outlines. Since the number of convective storms in the CCOPE (Cooperative Convective Precipitation Experiment) field experiment area are limited to only a few days during the operational time period the flight plans must be designed with a hierarchy of abort experiments so that the easily identified and lowest probability events should take priority until their quota is filled.

Orville, H.↗