Engineering Papers⌕ Search

Engineering topics

Miller, J. A.

Publications and source records attributed to Miller, J. A..

At least 19 records

Spatial and temporal variability of tritium in precipitation within South Africa and it's bearing on hydrological studies

Tritium, the radioactive isotope of hydrogen, has been used to understand groundwater recharge processes for decades. The current variation of tritium in the atmosphere is largely attributed to stratospheric production and fall out rates as well as global circulation phenomena controlling the hydrological cycle. Global controls on the variability in atmospheric tritium activity are poorly suited to explain local variation and tritium activities in precipitation are often assumed to be uniform over both local and regional catchments and watersheds. This assumption can result in both over and under estimation of modern recharge within an aquifer when using tritium as the recharge proxy. In order to minimize the inherent prediction residuals associated with tritium based recharge investigations, the variability of tritium in precipitation was modelled from 127 spatial precipitation samples taken over a two year period, combined with a 76 precipitation sample group-set taken over a one year period in a single location. Precipitation events were traced backward in time, from the point of collection, using HYSPLIT modelling to ascertain the origins of moisture content as well as the altitudes of moisture origin reached along the particle track. Tritium activities, collected over a one year period in Paarl, range from 0.45 to 4.16 TU and have a mean of 1.59 TU. Spatial storm events in the Western Cape in 2017 and 2018 had a range from 0 to 2.2 and 0.37 to 3.27 TU, respectively, with mean activities of 1.18 (n = 34) and 1.25 TU (n = 32). Both storm events had similar tritium variability (σ = 0.5 n = 35 and 0.48 n = 32). Regional precipitation events had the largest range of tritium activities (0.55–12.2 TU). Although not all tritium activities can be explained by interrogating the water mass origin, this study suggests that approximately 90% of events can be completely or partially attributed to the origin of the water mass. The variability of tritium, both spatially and temporally, was higher than expected, confirming that when uniform tritium inputs are used, the groundwater system would provide inaccurate modern recharge estimates. Higher spatial resolution of tritium variation in precipitation for a particular region will improve our ability to relate tritium activities in groundwater to local precipitation.

54 ENVIRONMENTAL SCIENCES↗

Employing Whisper in selecting benchmarks for traditional validation methods

The Nuclear Criticality Safety Program at Sandia National Laboratories (SNL) uses a collection of benchmarks developed from the International Handbook of Evaluated Criticality Safety Benchmark Experiments for validation of MCNP. In early 2016, an effort began to expand the benchmark collection to cover a broader range of materials and neutron spectra. The program undertook the task of updating current benchmarks to reflect best practices from Los Alamos National Laboratory (LANL) for MCNP calculations. Spring of 2016, LANL shared the Whisper code with SNL in a collaborated effort to investigate application of the code to activities at SNL. Whisper is a statistical package developed to support nuclear criticality safety validation efforts. It measures how well benchmarks correlate to a system or process and calculates a USL. Whisper has begun to develop into an asset for the SNL Nuclear Criticality Safety team to determine and reassure benchmarks selected for validation truly correlate process parameters (i.e., fall within an acceptable Area of Applicability). SNL's use of traditional statistical methods, with the abilities of Whisper to identify correlating benchmarks, has facilitated in ensuring confidence in validation and USL determination. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A perspective on the interaction between the NCSD and ANSI/ANS-8 standards

The intent of this paper is to illuminate the reasons behind the culture of standards involvement by the criticality safety community in the NCSD (Nuclear Criticality Safety Division), and specifically highlight those NCSD activities that build/support this culture. Many NCSD members are currently active in ANSI/ANS-8 and other standards and have been for the last half century. This paper was inspired by a request from ANS's Professional Divisions Committee concerning how the professional divisions could 'increase support to Standards development as Subject Matter Experts'. The healthy level of involvement (i.e., culture) by the NCSD membership in standards was noted. A history of the ANSI/ANS-8 series standards is provided, with roots going back to 1955. The need became apparent during a cluster of nuclear criticality accidents that occurred between 1958-1962. The first NCS related standard was the American Standard N6.1-1964, the parent of ANSI/ANS-8.1, which was prepared in 1958 and adopted in 1964. Thus, the involvement in standards by the NCS community goes back more than 50 years. The NCSD continues to help foster a culture of standards use and development. However, the support provided by the NCSD is frequently not recognized, and standards activities are often viewed as separate from the NCSD. This paper highlights the interaction between the NCSD and the ANSI/ANS-8 standards activities as well as the benefit of this support. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Moisture, anisotropy, stress state, and strain rate effects on bighorn sheep horn keratin mechanical properties

Our paper investigates the effects of moisture, anisotropy, stress state, and strain rate on the mechanical properties of the bighorn sheep (Ovis Canadensis) horn keratin. The horns consist of fibrous keratin tubules extending along the length of the horn and are contained within an amorphous keratin matrix. We tested samples in the rehydrated (35 wt.% water) and ambient dry (10 wt.% water) conditions along the longitudinal and radial directions under tension and compression. Increased moisture content was found to increase ductility and decrease strength, as well as alter the stress state dependent nature of the material. Furthermore, the horn keratin demonstrates a significant strain rate dependence in both tension and compression, and also showed increased energy absorption in the hydrated condition at high strain rates when compared to quasi-static data, with increases of 114% in tension and 192% in compression. Compressive failure occurred by lamellar buckling in the longitudinal orientation followed by shear delamination. Tensile failure in the longitudinal orientation occurred by lamellar delamination combined with tubule pullout and fracture. Finally, the structure-property relationships quantified here for bighorn sheep horn keratin can be used to help validate finite element simulations of ram’s impacting each other as well as being useful for other analysis regarding horn keratin on other animals.

36 MATERIALS SCIENCE↗

A Comparison of Snow Depth on Sea Ice Retrievals Using Airborne Altimeters and an AMSR-E Simulator

A comparison of snow depths on sea ice was made using airborne altimeters and an Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E) simulator. The data were collected during the March 2006 National Aeronautics and Space Administration (NASA) Arctic field campaign utilizing the NASA P-3B aircraft. The campaign consisted of an initial series of coordinated surface and aircraft measurements over Elson Lagoon, Alaska and adjacent seas followed by a series of large-scale (100 km ? 50 km) coordinated aircraft and AMSR-E snow depth measurements over portions of the Chukchi and Beaufort seas. This paper focuses on the latter part of the campaign. The P-3B aircraft carried the University of Colorado Polarimetric Scanning Radiometer (PSR-A), the NASA Wallops Airborne Topographic Mapper (ATM) lidar altimeter, and the University of Kansas Delay-Doppler (D2P) radar altimeter. The PSR-A was used as an AMSR-E simulator, whereas the ATM and D2P altimeters were used in combination to provide an independent estimate of snow depth. Results of a comparison between the altimeter-derived snow depths and the equivalent AMSR-E snow depths using PSR-A brightness temperatures calibrated relative to AMSR-E are presented. Data collected over a frozen coastal polynya were used to intercalibrate the ATM and D2P altimeters before estimating an altimeter snow depth. Results show that the mean difference between the PSR and altimeter snow depths is -2.4 cm (PSR minus altimeter) with a standard deviation of 7.7 cm. The RMS difference is 8.0 cm. The overall correlation between the two snow depth data sets is 0.59.

Cavalieri, D. J.↗

Ion and relativistic electron transport in solar flares

Recent models for the ion and relativistic electron transport in solar flare magnetic loops are reviewed, focusing on the ways in which the models handle loop structure, particle acceleration, and particle transport. Results are presented from Monte Carlo simulations of ion and relativistic ion transport. Consideration is given to results concerning the depth distributions of gamma-ray production, the attenuation of gamma-ray lines, the time dependences of the various emissions and the angular distribution of the bremsstrahlung.

Ramaty, R.↗

Solar accelerated particles - Comparisons of abundances and energy spectra from particle and gamma-ray observations

Gamma-ray observations of the April 27, 1981 flare have been used to derive elemental abundances of both the ambient gas and the accelerated particle which interact with this gas to produce gamma rays. The results show that the abundances of the accelerated particles which produce the gamma rays are much more consistent with first-class particle abundances than with large proton-flare abundances. Observed bremsstrahlung spectral from 16 flares are compared with calculated bremsstrahlung spectra. It is concluded that the electrons observed in interplanetary space and the electrons responsible for gamma-ray production cannot be drawn from the same accelerated particle population without the former being affected by reacceleration or energy-dependent escape.

Ramaty, R.↗

High-speed machining of Space Shuttle External Tank (ET) panels

Potential production rates and project cost savings achieved by converting the conventional machining process in manufacturing shuttle external tank panels to high speed machining (HSM) techniques were studied. Savings were projected from the comparison of current production rates with HSM rates and with rates attainable on new conventional machines. The HSM estimates were also based on rates attainable by retrofitting existing conventional equipment with high speed spindle motors and rates attainable using new state of the art machines designed and built for HSM.

Miller, J. A.↗

High-Speed Machining (HSM) of Space Shuttle External Tank (ET) panels

The External Fuel Tank (ET) of the Space Shuttle is not recovered after launch and a new one must be provided for each launch. Currently, the external ""skin'' panels of the tank are produced by machining from solid wrought 2219-T87 aluminum plate stock approximately 1-3/4 inch thick. The reduction of costs in producing External Fuel Tank panels is obviously of increasing production rates and decreasing costs of the panels through the application of high-speed machining (HSM) techniques was conducted.

Miller, J. A.↗

High-speed machining of space shuttle External Tank (ET) panels

The applicability to and advantages of the high-speed machining process for the production of Space Shuttle external tank panels by physically machining selected sample portions of an external tank panel were investigated. The panel sample configuration was selected, and potential high speed milling procedures identified. An 8 foot long panel was machined and the milling demonstration is described in detail.

Miller, J. A.↗

Guidance system for a roving vehicle

Computer controlled guidance system for semiautonomous robot guides robot in incompletely defined environment. System operates in real time avoiding obstacles detected by "stereo television and laser range finder eyes."

Miller, J. A.↗

A discrete adaptive guidance system for a roving vehicle

An adaptive guidance technique which provides a self-correcting path following capability in an environment sensitive semi-autonomous roving robot is described. A real-time maneuver planning function performs tradeoffs between speed, magnitude of expected deviations and accelerations to best satisfy the design goals of vehicle safety and reliability, subsystem autonomy, performance accuracy and operational efficiency. The appropriate combination of maneuver parameters is selected through an iterative process using knowledge of vehicle performance characteristics, environmental model updates and vehicle state

Miller, J. A.↗

Demonstration of optical navigation measurements on Mariner 10

An experiment was performed on the Mariner 10 Venus/Mercury mission to assess the performance of the onboard television cameras and ground-based software used in the optical navigation measurement system. The elements of the system, calibration, and distortion are considered. The navigation technique requires detection of stars in the same field of view as the target body. The star detection capability is discussed with reference to required threshold, calibration factors, standard conditions, camera sensitivity, response uniformity, and the effect of image smearing. Tests conducted during the Mariner 10 encounters with Mercury demonstrated that a large bright planet can be imaged simultaneously with faint stars to provide accurate navigation data. Improvements are suggested in the system for the Mariner Jupiter/Saturn 1977 and later missions.

Stanton, R. H.↗