Engineering Papers⌕ Search

Engineering topics

Miley, G. H.

Publications and source records attributed to Miley, G. H..

Feasibility of Traveling Wave Direct Energy Conversion of Fission Reaction Fragments

Fission fragment direct energy conversion has been considered in the past for the purpose of increasing nuclear power plant efficiency and for advanced space propulsion. Since the fragments carry electric charge (typically in the order of 20 e) and have 100 MeV-range kinetic energy, techniques utilizing very high-voltage DC electrodes have been considered. This study is focused on a different approach: the kinetic energy of the charged fission fragments is converted into alternating current by means of a traveling wave coupling scheme (Traveling Wave Direct Energy Converter, TWDEC), thereby not requiring the utilization of high voltage technology. A preliminary feasibility analysis of the concept is introduced based on a conceptual level study and on a particle simulation model of the beam dynamics.

Tarditi, A. G.↗

Inertial electrostatic confinement as a power source for electric propulsion

The potential use of an INERTIAL ELECTROSTATIC CONFINEMENT (IEC) power source for space propulsion has previously been suggested by the authors and others. In the past, these discussions have generally followed the charged-particle electric-discharge engine (QED) concept proposed by Bussard, in which the IEC is used to generate an electron beam which vaporizes liquid hydrogen for use as a propellant. However, an alternate approach is considered, using the IEC to drive a 'conventional' electric thruster unit. This has the advantage of building on the rapidly developing technology for such thrusters, which operate at higher specific impulse. Key issues related to this approach include the continued successful development of the physics and engineering of the IEC unit, as well as the development of efficient step-down dc voltage transformers. The IEC operates by radial injection of energetic ions into a spherical vessel. A very high ion density is created in a small core region at the center of the vessel, resulting in extremely high fusion power density in the core. Experiments at the U. of Illinois in small IEC devices (is less than 60 cm. dia.) demonstrated much of the basic physics underlying this concept, e.g. producing 10(exp 6) D-D neutrons/sec steady-state with deuterium gas flow injection. The ultimate goal is to increase the power densities by several orders of magnitude and to convert to D-He-3 injection. If successful, such an experiment would represent a milestone proof-of-principle device for eventual space power use. Further discussion of IEC physics and status are presented with a description of the overall propulsion system and estimated performance.

Miley, G. H.↗

An approach to space power

Fusion offers the potential for a very high specific power, providing a large specific impulse that can be traded-off with thrust for mission optimization. Thus fusion is a leading candidate for missions beyond the moon. A new approach is discussed for space fusion power, namely Inertial Electrostatic Confinement (IEC). This method offers a high power density in a relatively small, simple device. It appears capable of burning aneutronic fuels which are most desirable for space applications and is well suited for direct conversion. An experimental device to test the concept is described.

Miley, G. H.↗

An experimental investigation of 235 sub UF sub 6 fission produced plasmas

A gas handling system capable of use with uranium fluoride was designed and constructed for use with nuclear pumped laser experiments using the TRIGA research reactor. By employing careful design and temperature controls, the UF6 can be first transported into the irradiation chamber, and then, at the conclusion of the experiment, returned to gas cylinders. The design of the system is described. Operating procedures for the UF6 and gas handling systems are included.

Miley, G. H.↗

University of Illinois nuclear pumped laser program

The development of nuclear pumped lasers with improved efficiency, energy storage capability, and UF6 volume pumping is reviewed. Results of nuclear pumped laser experiments using a TRIGA-type pulsed reactor are outlined.

Miley, G. H.↗

An experimental investigation of (UF-235)6 fission nuclear-pumped lasers

A UF6 handling system was designed for use in conjunction with the existing nuclear-pumped laser vacuum system at a nuclear reactor laboratory to perform the experiments described above. A modification to separate the gas fill system from the vacuum system and thus greatly reduce its volume is described as well as operating procedures for the first controlled nuclear pumping experiments with UF6 vapor contained in the laser cell.

Miley, G. H.↗

An atomic model for neutral and singly ionized uranium

A model for the atomic levels above ground state in neutral, U(0), and singly ionized, U(+), uranium is described based on identified atomic transitions. Some 168 states in U(0) and 95 in U(+) are found. A total of 1581 atomic transitions are used to complete this process. Also discussed are the atomic inverse lifetimes and line widths for the radiative transitions as well as the electron collisional cross sections.

Maceda, E. L.↗

Evaluation of performance of select fusion experiments and projected reactors

The performance of NASA Lewis fusion experiments (SUMMA and Bumpy Torus) is compared with other experiments and that necessary for a power reactor. Key parameters cited are gain (fusion power/input power) and the time average fusion power, both of which may be more significant for real fusion reactors than the commonly used Lawson parameter. The NASA devices are over 10 orders of magnitude below the required powerplant values in both gain and time average power. The best experiments elsewhere are also as much as 4 to 5 orders of magnitude low. However, the NASA experiments compare favorably with other alternate approaches that have received less funding than the mainline experiments. The steady-state character and efficiency of plasma heating are strong advantages of the NASA approach. The problem, though, is to move ahead to experiments of sufficient size to advance in gain and average power parameters.

Miley, G. H.↗

Nuclear pumping of a neutral carbon laser

Nuclear pumped lasing on the neutral carbon line at 1.45 micron was achieved in mixtures of He-CO, He-N2-CO, He-CO2, and Ne-CO and Ne-CO2. A minimum thermal neutron flux of 2 x 10 to the 14th power sq cm-sec was sufficient for oscillation in the helium mixtures. The peak of the laser output was delayed up to 5.5 ms relative to the neutron pulse in He-CO2, He-N2-CO, Ne-CO, and Ne-CO2 mixtures while no delay was observed in He-CO mixtures. Lasing was obtained with helium pressures from 20 to 800 T, Ne pressures from 100 to 200 T, CO from 0.25 to 20 mT, N2 from 0.5 mT, and CO2 from 0.1 to 25 mT in the respective mixtures.

Prelas, M. A.↗

Nuclear pumping of a neutral carbon laser

Nuclear pumped lasing on the neutral carbon line at 1.45 microns has been achieved in mixtures of He-CO, He-N2-CO, He-CO2, and Ne-CO and Ne-CO2. A minimum thermal neutron flux of 2 x 10 to the 14th n/sq cm-sec was sufficient for oscillation in the helium mixtures. The peak of the laser output was delayed up to 5.5 ms relative to the neutron pulse in He-CO2, He-N2-CO, Ne-CO and Ne-CO2 mixtures while no delay was observed in He-CO mixtures. Lasing was obtained with helium pressures from 20 to 800 T, Ne pressures from 100 to 200 T, CO from 0.25 to 20 mT, N2 from 0.5 to 5 mT, and CO2 from 0.1 to 25 mT in the respective mixtures.

Prelas, M. A.↗

Energy distributions and radiation transport in uranium plasmas

An approximate analytic model, based on continuous electron slowing, has been used for survey calculations. Where more accuracy is required, a Monte Carlo technique is used which combines an analytic representation of Coulombic collisions with a random walk treatment of inelastic collisions. The calculated electron distributions have been incorporated into another code that evaluates both the excited atomic state densities within the plasma and the radiative flux emitted from the plasma.

Miley, G. H.↗

The pumping mechanism for the neon-nitrogen nuclear excited laser

In order to determine the physical processes for pumping this laser, a detailed study of the afterglow system has been performed. The pumping mechanism has been found to be collisional-radiative electron-ion recombination. Microwave quenching of both the laser and spontaneous afterglow light have shown conclusively that a recombination process directly produces a nitrogen atom in either the upper laser level or, more likely, in a higher lying energy level which rapidly de-excites to the upper laser level.

Cooper, G. W.↗

Recent nuclear pumped laser results

Recent direct nuclear pumped laser research has concentrated on experiments with three gas mixtures (Ne-N2, He-Ne-O2, and He-Hg). One mixture has been made to lase and gain has been achieved with the other two. All three of these mixtures are discussed with particular attention paid to He-Hg. Of interest is the 6150-angstroms ion transition in Hg(+). The upper state of this transition is formed directly by charge transfer and by Penning ionization.

Miley, G. H.↗

Electron energy distribution in a helium plasma created by nuclear radiations

An integral balance technique for calculation of the electron energy distribution in a radiation-induced plasma is described. Results predict W-values reasonably well and compare favorably with more complicated Monte-Carlo calculations. The distribution found differs from that in a normal electrical discharge and is of interest in radiation-pumped laser research.

Lo, R. H.↗

Calculation of electron energy flux distributions in noble gases.

The electron flux spectrum has been calculated over the entire range from delta-ray energies to ionization-potential energies. Estimates based on the Born approximation indicate that electron-gas atom elastic losses can be neglected. Gryzinski's (1965) classical cross sections show that electron-thermalized electron interactions can be ignored. Under those conditions the energy degradation is primarily due to the excitation and ionization of background gas.

Lo, R.↗