Engineering topics

Mikheev, Evgeny

Publications and source records attributed to Mikheev, Evgeny.

7 records

DOE OSTI2024

Fractional AC Josephson effect in a topological insulator proximitized by a self-formed superconductor

A lateral Josephson junction in which the surface of a 3D topological insulator serves as the weak link should support topologically protected excitations related to Majorana fermions. The resulting 4π-periodic current-phase relationship could be detected under high-frequency excitation by the suppression of odd Shapiro steps. Here, in this study, we demonstrate such devices through the self-formation of a Pd-Te superconducting layer from a telluride topological insulator, and observe suppressed first and third Shapiro steps. Other devices, including those where the Pd-Te layer is bolstered by an additional Al layer, show no suppression of Shapiro steps, a difference supported by simulations. Though we rule out the known trivial causes of suppressed Shapiro steps in our devices, we nevertheless argue that corroborating measurements and disorder-aware theoretical descriptions of these systems are needed before confidently claiming the observation of Majorana states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Universal Conductance Fluctuations in a MnBi 2 Te 4 Thin Film

Quantum coherence of electrons can produce striking behaviors in mesoscopic conductors, including weak localization and the Aharonov-Bohm effect. Although magnetic order can also strongly affect transport, the combination of coherence and magnetic order has been largely unexplored. Here, we examine quantum coherence-driven universal conductance fluctuations in the antiferromagnetic, canted antiferromagnetic, and ferromagnetic phases of a thin film of the topological material MnBi 2 Te 4 . In each magnetic phase we extract a charge carrier phase coherence length of about 100 nm. The conductance magnetofingerprint is repeatable when sweeping applied magnetic field within one magnetic phase, but changes when the applied magnetic field crosses the antiferromagnetic/canted antiferromagnetic magnetic phase boundary. Surprisingly, in the antiferromagnetic and canted antiferromagnetic phase, but not in the ferromagnetic phase, the magnetofingerprint depends on the direction of the field sweep. Finally, to explain these observations, we suggest that conductance fluctuation measurements are sensitive to the motion and nucleation of magnetic domain walls in MnBi 2 Te 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

A clean ballistic quantum point contact in strontium titanate

The perovskite oxide strontium titanate (SrTiO 3 ) combines electrostatic tunability, superconductivity and spin–orbit coupling, and is of potential use in the development of quantum devices. However, exploring quantum effects in SrTiO 3 nanostructures is challenging because of the presence of disorder. Here, in this work, we report high-mobility, gate-tunable devices in SrTiO 3 that have ballistic constrictions and clean normal-state conductance quantization. Our devices are based on SrTiO 3 two-dimensional electron gas channels that have a thin hafnium oxide barrier layer between the channel and an ionic liquid gate. Conductance plateaus show twofold degeneracy that persists for magnetic fields of at least 5 T. This is above what is expected from the g factors extracted at high fields and could be a signature of electron pairing extending outside the superconducting regime.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Feedback lock-in: A versatile multi-terminal measurement system for electrical transport devices

Here, we present the design and implementation of a measurement system that enables parallel drive and detection of small currents and voltages at numerous electrical contacts to a multi-terminal electrical device. This system, which we term a feedback lock-in, combines digital control-loop feedback with software-defined lock-in measurements to dynamically source currents and measure small, pre-amplified potentials. The effective input impedance of each current/voltage probe can be set via software, permitting any given contact to behave as an open-circuit voltage lead or as a virtually grounded current source/sink. This enables programmatic switching of measurement configurations and permits measurement of currents at multiple drain contacts without the use of current preamplifiers. Our 32-channel implementation relies on commercially available digital input/output boards, home-built voltage preamplifiers, and custom open-source software. With our feedback lock-in, we demonstrate differential measurement sensitivity comparable to a widely used commercially available lock-in amplifier and perform efficient multi-terminal electrical transport measurements on twisted bilayer graphene and SrTiO 3 quantum point contacts. The feedback lock-in also enables a new style of measurement using multiple current probes, which we demonstrate on a ballistic graphene device.

47 OTHER INSTRUMENTATION↗

DOE OSTI2022

Ionic Liquid Gating of SrTiO 3 Lamellas Fabricated with a Focused Ion Beam

Here, in this work, we combine two previously incompatible techniques for defining electronic devices: shaping three-dimensional crystals by focused ion beam (FIB), and two-dimensional electrostatic accumulation of charge carriers. The principal challenge for this integration is nanometer-scale surface damage inherent to any FIB-based fabrication. We address this by using a sacrificial protective layer to preserve a selected pristine surface. The test case presented here is accumulation of 2D carriers by ionic liquid gating at the surface of a micron-scale SrTiO 3 lamella. Preservation of surface quality is reflected in superconductivity of the accumulated carriers. This technique opens new avenues for realizing electrostatic charge tuning in materials that are not available as large or exfoliatable single crystals, and for patterning the geometry of the accumulated carriers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2021

Quantized critical supercurrent in SrTiO 3 -based quantum point contacts

Superconductivity in SrTiO 3 occurs at remarkably low carrier densities and therefore, unlike conventional superconductors, can be controlled by electrostatic gates. Here, we demonstrate nanoscale weak links connecting superconducting leads, all within a single material, SrTiO 3 . Ionic liquid gating accumulates carriers in the leads, and local electrostatic gates are tuned to open the weak link. These devices behave as superconducting quantum point contacts with a quantized critical supercurrent. This is a milestone toward establishing SrTiO 3 as a single-material platform for mesoscopic superconducting transport experiments that also intrinsically contains the necessary ingredients to engineer topological superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Application-driven synthesis and characterization of hexagonal boron nitride deposited on metals and carbon nanotubes

Hexagonal boron nitride (h-BN) is unique among two-dimensional materials, with a large band gap (~6 eV) and high in-plane thermal conductivity (>400 W m -1 K -1 ), second only to diamond among electrical insulators. Many studies to date have relied on exfoliated h-BN, however, for large-scale applications the material must be synthesized by methods such as chemical vapor deposition (CVD). Here, we first investigate single-layer h-BN synthesized by CVD on single crystal platinum (Pt), comparing these films with h-BN deposited on more commonly used polycrystalline Pt and Cu. The h-BN film grown on single crystal Pt has the lowest surface roughness and best spatial homogeneity, and our electrochemical transfer process allows the Pt to be reused with no measurable degradation. Additionally, we also demonstrate direct capping of carbon nanotubes (CNTs) with as-grown h-BN, but we find that the direct growth partly degrades the CNT electrical conductivity. On the other hand, we show that transferred monolayer h-BN can serve as an ultrathin barrier which protects MoS2 from damage at high temperatures and discuss other applications that take advantage of the conformal h-BN deposition.

2D materials↗