Engineering Papers⌕ Search

Engineering topics

Miao, Y.

Publications and source records attributed to Miao, Y..

24 records · Page 2

Nuclear Energy Advanced Modeling and Simulation (NEAMS) Accident Tolerant Fuels High Impact Problem: Coordinate Multiscale U 3 Si 2 Modeling

Since the events at the Fukushima-Daiichi nuclear power plant in March 2011 significant research has unfolded at national laboratories, universities and other institutions into alternative materials that have potential enhanced accident tolerance when compared to traditional \uo~fuel zircaloy clad fuel rods. One of the potential replacement fuels is uranium silicide (\usi) for its higher thermal conductivity and uranium density. The lower melting temperature is of potential concern during postulated accident conditions. Another disadvantage for \usi~ is the lack of experimental data under power reactor conditions. Due to the aggressive development schedule for inserting some of the potential materials into lead test assemblies or rods by 2022~\cite{bragg-sitton_2014} multiscale multiphysics modeling approaches have been used to provide insight into these materials. \\ \noindent The purpose of this letter report is to highlight the multiscale modeling effort for \usi~fuel as part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Accident Tolerant Fuel (ATF) High Impact Problem (HIP). This fiscal year two new models for \usi~fuel have been incorporated into the BISON fuel performance code~\cite{Williamson2012} based upon lower length scale simulations using the GRASS-SST rate theory code. The models are briefly described in the following sections.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Cross section TEM characterization of high-energy-Xe-irradiated U-Mo

U-Mo alloys irradiated with 84 MeV Xe ions to various doses were characterized with transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) techniques. The TEM thin foils were prepared perpendicular to the irradiated surface to allow a direct observation of the entire region modified by ions. Furthermore, depth-selective microstructural information was revealed. Varied irradiation-induced phenomena such as gas bubble formation, phase reversal, and recrystallization were observed at different ion penetration depths in U-Mo.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fission gas swelling in U{sub 3}Si{sub 2} at LWR conditions

In order to evaluate the feasibility of replacing uranium dioxide fuel with U{sub 3}Si{sub 2} fuel, it is crucial to examine the fuel performance of the silicide fuel under typical LWR conditions. At this early stage of U{sub 3}Si{sub 2} fuel development, before undertaking costly in-pile irradiation experiments and corresponding post-irradiation examinations, it is appropriate to utilize modeling tools to estimate the behavior of U{sub 3}Si{sub 2} in LWRs based on available in-pile irradiation experiments as well as the state-of-the-art calculation capabilities provided by density functional theory (DFT). Therefore, a comprehensive investigation of the fission gas swelling behavior of U{sub 3}Si{sub 2} at LWR conditions is reported here. The modeling efforts in this study are based on the Gas Release and Swelling Subroutine for Steady-State and Transient (GRASS-SST) rate theory (RT) model of fission gas bubble evolution that has been successfully applied to a variety of fuel materials in numerous types of reactors. Both existing in-pile irradiation data and DFT-based calculations were used for the optimized parametrization of the RT model. In addition, the fuel-cladding interaction was captured by coupling the RT model with simplified mechanical correlations. Both the swelling behavior and the fission gas bubble size distribution were predicted by the rate theory model. At LWR conditions, the RT model predicts that intragranular bubbles dominate the gaseous swelling behavior and that the evolution of intergranular bubbles and corresponding gas release are suppressed, confirming the qualification of U{sub 3}Si{sub 2} as a LWR fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High-energy synchrotron study of in-pile-irradiated U–Mo fuels

Here synchrotron scattering analysis results on U–7wt.%Mo fuel specimens irradiated in the Advanced Test Reactor to three burnup levels (3.0, 5.2, and 6.3 × 1021 fission/cm3) are reported. Mature fission gas bubble superlattice was observed to form at intermediate burnup. The superlattice constant was determined to be 11.7 and 12.0 nm by wide-angle and small-angle scattering respectively. Grain sub-division takes place throughout the irradiation and causes the collapse of the superlattice at high burnup. The bubble superlattice expands the U–Mo lattice and acts as strong sink for radiation-induced defects. The evolution of dislocation loops was, therefore, suppressed until the bubble superlattice collapsed.

metallic nuclear fuel↗

Multiscale Multiphysics Developments for Accident Tolerant Fuel Concepts

U 3 Si 2 and iron-chromium-aluminum (Fe-Cr-Al) alloys are two of many proposed accident-tolerant fuel concepts for the fuel and cladding, respectively. The behavior of these materials under normal operating and accident reactor conditions is not well known. As part of the Department of Energy’s Accident Tolerant Fuel High Impact Problem program significant work has been conducted to investigate the U 3 Si 2 and FeCrAl behavior under reactor conditions. This report presents the multiscale and multiphysics effort completed in fiscal year 2015. The report is split into four major categories including Density Functional Theory Developments, Molecular Dynamics Developments, Mesoscale Developments, and Engineering Scale Developments. The work shown here is a compilation of a collaborative effort between Idaho National Laboratory, Los Alamos National Laboratory, Argonne National Laboratory and Anatech Corp.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗