Engineering Papers⌕ Search

Engineering topics

Meunier, Vincent

Publications and source records attributed to Meunier, Vincent.

At least 19 records

Resonant Raman in armchair graphene nanoribbons from first-principles

Resonant Raman spectra of armchair graphene nanoribbons (AGNRs) are computed using Density Functional Theory (DFT) and third-order perturbation theory. Results are benchmarked against available experimental data and compared to previously used theoretical approaches based on the Placzek approximation. Comparable agreement with experiments is found for both previously and presently used methods. In addition, a numerical analysis is carried out to provide a justification for the resonant modeling method based on the use of the frequency-dependent dielectric tensor in the Placzek approximation. Finally, this work also provides additional predictions and references for wide AGNRs that might be investigated with Raman scattering experiments in the future.

42 ENGINEERING↗

Growth Optimization and Device Integration of Narrow‐Bandgap Graphene Nanoribbons

Abstract The electronic, optical, and magnetic properties of graphene nanoribbons (GNRs) can be engineered by controlling their edge structure and width with atomic precision through bottom‐up fabrication based on molecular precursors. This approach offers a unique platform for all‐carbon electronic devices but requires careful optimization of the growth conditions to match structural requirements for successful device integration, with GNR length being the most critical parameter. In this work, the growth, characterization, and device integration of 5‐atom wide armchair GNRs (5‐AGNRs) are studied, which are expected to have an optimal bandgap as active material in switching devices. 5‐AGNRs are obtained via on‐surface synthesis under ultrahigh vacuum conditions from Br‐ and I‐substituted precursors. It is shown that the use of I‐substituted precursors and the optimization of the initial precursor coverage quintupled the average 5‐AGNR length. This significant length increase allowed the integration of 5‐AGNRs into devices and the realization of the first field‐effect transistor based on narrow bandgap AGNRs that shows switching behavior at room temperature. The study highlights that the optimized growth protocols can successfully bridge between the sub‐nanometer scale, where atomic precision is needed to control the electronic properties, and the scale of tens of nanometers relevant for successful device integration of GNRs.

36 MATERIALS SCIENCE↗

Electronic and vibrational properties of bulk Cr 2 Ge 2 Te 6 from first-principles calculations

Here we use density functional theory based ab initio calculations to investigate the structural, vibrational, magnetic, and electronic properties of the layered ferromagnet Cr 2 Ge 2 Te 6 (CGT) that has attracted attention for potential spintronic applications. We optimize the structure for a fixed c/a ratio. Our results are in excellent agreement with experimental data on structure, phonons, and electronic properties. The use of van der Waals interactions and relativistic spin-orbit coupling yields accurate lattice constants and interlayer distances. Simultaneously, the adopted theoretical methods lead to a rigorous description of the vibrational normal modes, as well as the valence bands, that are in excellent agreement with Raman spectroscopy and angle-resolved photoemission spectroscopy spectra, respectively. The magnetic moment is slightly overestimated, and the magnetic anisotropy has the correct sign but is greater in magnitude than that in experiment. We find that inclusion of the on-site Coulomb repulsion on Cr−3d orbitals worsens agreement with experiment, in contrast to previous studies. Our results provide a path toward ab initio analysis of magnetic heterostructures based on CGT.

36 MATERIALS SCIENCE↗

Partial charge transfer and absence of induced magnetization in EuS(111)/Bi 2 Se 3 heterostructures

We report that heterostructures made from topological and magnetic insulators promise to form excellent platforms for new electronic and spintronic functionalities mediated by interfacial effects. We report the results of a first-principles density functional theory study of the geometric, electronic structure, and magnetic properties of the EuS( 111 )/Bi 2 Se 3 interface, including van der Waals and relativistic spin-orbit effects. In contrast to previous theoretical studies, we find no appreciable magnetic anisotropy in such a heterostructure. We also do not see additional induced magnetization at the interface or the magnetic proximity effect on the topological states. This is due to the localized nature of Eu moments and because of a partial charge transfer of ~ 0.5 electron from Eu to Se. The formation of the surface dipole shifts the Dirac cone about 0.4 eV below the chemical potential, and the associated electrostatic screening moves the topological state from the first to the second quintuple layer of Bi 2 Se 3 .

36 MATERIALS SCIENCE↗

Voltage-Dependent Barrier Height of Electron Transport through Iron Porphyrin Molecular Junctions

Electron transport through iron porphyrin (FeP) molecules self-assembled on a gold (Au) substrate was investigated using conductive atomic force microscopy (AFM) to measure current–voltage (I–V) characteristics. In the direct tunneling region (|V| ≤ 0.1 V), the Simmons model was used to characterize the electron transport. Furthermore, the energy barrier between the Fermi energy level of Au and the highest occupied molecular orbital (HOMO) level of the FeP molecule was determined to be between 0.3 and 0.6 eV; the range of the electron attenuation coefficient was 0.6–0.8 Å–1. Instead of a constant barrier height, a voltage-dependent barrier height was adapted to simulate the experimental I–V curves over the entire voltage range (|V| ≤ 2 V) using the Simmons model for the intermediate case. The voltage-dependent barrier height is supported by a previously predicted response of molecular-projected self-consistent Hamiltonian orbitals. The dependence showed that the HOMO level relative to the Fermi energy level of the Au electrode decreased as the bias voltage increased. To verify the deposition of the FeP on the Au substrate, Raman spectroscopy and AFM analysis were performed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-frequency Raman signature of Ag-intercalated few-layer MoS 2

Density functional theory based calculations and experimental analysis on a limited number of real samples are performed to study how the presence of silver intercalated in the van der Waals gap of few-layer MoS 2 affects the low-frequency Raman active modes of this material. Silver is found to predominantly affect the breathing-like and shear-like vibrational modes of MoS 2 . These modes correspond to quasi-rigid movements of each individual layer with a restoring force (and, in turn, frequency) that is determined by modulations in the weak interlayer interactions. Noticeable red-shifts with increasing Ag concentration are found for all low-frequency modes. This finding indicates the potential for low-frequency vibrations as useful gauges for practical determination of silver concentration using low-frequency Raman spectroscopy. Finally, this work also describes a semi-classical linear chain model that allows to extrapolate results to a large number of layers. Further, first-principles calculations show how Raman spectroscopy can be used to characterize the quality of the two-dimensional interface between MoS 2 and a silver substrate.

36 MATERIALS SCIENCE↗

Enabling room temperature ferromagnetism in monolayer MoS2 via in situ iron-doping

Abstract Two-dimensional semiconductors, including transition metal dichalcogenides, are of interest in electronics and photonics but remain nonmagnetic in their intrinsic form. Previous efforts to form two-dimensional dilute magnetic semiconductors utilized extrinsic doping techniques or bulk crystal growth, detrimentally affecting uniformity, scalability, or Curie temperature. Here, we demonstrate an in situ substitutional doping of Fe atoms into MoS 2 monolayers in the chemical vapor deposition growth. The iron atoms substitute molybdenum sites in MoS 2 crystals, as confirmed by transmission electron microscopy and Raman signatures. We uncover an Fe-related spectral transition of Fe:MoS 2 monolayers that appears at 2.28 eV above the pristine bandgap and displays pronounced ferromagnetic hysteresis. The microscopic origin is further corroborated by density functional theory calculations of dipole-allowed transitions in Fe:MoS 2 . Using spatially integrating magnetization measurements and spatially resolving nitrogen-vacancy center magnetometry, we show that Fe:MoS 2 monolayers remain magnetized even at ambient conditions, manifesting ferromagnetism at room temperature.

36 MATERIALS SCIENCE↗

Direct Observation of Symmetry-Dependent Electron–Phonon Coupling in Black Phosphorus

Electron–phonon coupling in two-dimensional nanomaterials plays a fundamental role in determining their physical properties. Such interplay is particularly intriguing in semiconducting black phosphorus (BP) due to the highly anisotropic nature of its electronic structure and phonon dispersions. Here we report the direct observation of symmetry-dependent electron–phonon coupling in BP by performing the polarization-selective resonance Raman measurement in the visible and ultraviolet regimes, focusing on the out-of-plane A g 1 and in-plane A g 2 phonon modes. Their intrinsic resonance Raman excitation profiles (REPs) were extracted and quantitatively compared. The in-plane A g 2 mode exhibits remarkably strong resonance enhancement across the excitation wavelengths when the excitation polarization is parallel to the armchair (A g 2 //AC) direction. In contrast, a dramatically weak resonance effect was observed for the same mode with the polarization parallel to zigzag (A g 2 //ZZ) direction and for the out-of-plane A g 1 mode (A g 1 //AC and A g 1 //ZZ). Analysis on quantum perturbation theory and first-principles calculations on the anisotropic electron distributions in BP demonstrated that electron–phonon coupling considering the symmetry of the involved excited states and phonon vibration patterns is responsible for this phenomenon. Further analysis of the polarization-dependent REPs for A g phonons allows us to resolve the existing controversies on the physical origin of Raman anomaly in BP and its dependence on excitation energy, sample thickness, phonon modes, and crystalline orientation. Finally, our study gives deep insights into the underlying interplay between electrons and phonons in BP and paves the way for manipulating the electron–phonon coupling in anisotropic nanomaterials for future device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimized Substrates and Measurement Approaches for Raman Spectroscopy of Graphene Nanoribbons

The on-surface synthesis of graphene nanoribbons (GNRs) allows for the fabrication of atomically precise narrow GNRs. Despite their exceptional properties which can be tuned by ribbon width and edge structure, significant challenges remain for GNR processing and characterization. In this work, Raman spectroscopy is used to characterize different types of GNRs on their growth substrate and track their quality upon substrate transfer. A Raman-optimized (RO) device substrate and an optimized mapping approach are presented that allow for the acquisition of high-resolution Raman spectra, achieving enhancement factors as high as 120 with respect to signals measured on standard SiO 2 /Si substrates. This approach is well suited to routinely monitor the geometry-dependent low-frequency modes of GNRs. In particular, the radial breathing-like mode (RBLM) and the shear-like mode (SLM) for 5-, 7-, and 9-atom-wide armchair GNRs (AGNRs) are tracked and their frequencies are compared with first-principles calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On–Surface Synthesis and Characterization of Acene–Based Nanoribbons Incorporating Four–Membered Rings

A bottom up method for the synthesis of unique tetracene–based nanoribbons, which incorporate cyclobutadiene moieties as linkers between the acene segments, is reported. These structures were achieved through the formal [2+2] cycloaddition reaction of ortho –functionalized tetracene precursor monomers. The formation mechanism and the electronic and magnetic properties of these nanoribbons were comprehensively studied by means of a multitechnique approach. Ultra–high vacuum scanning tunneling microscopy showed the occurrence of metal–coordinated nanostructures at room temperature and their evolution into nanoribbons through formal [2+2] cycloaddition at 475 K. Frequency–shift non–contact atomic force microscopy images clearly proved the presence of bridging cyclobutadiene moieties upon covalent coupling of activated tetracene molecules. Insight into the electronic and vibrational properties of the so–formed ribbons was obtained by scanning tunneling microscopy, Raman spectroscopy, and theoretical calculations. Magnetic properties were addressed from a computational point of view, allowing us to propose promising candidates to magnetic acene–based ribbons incorporating four–membered rings. Here, the reported findings will increase the understanding and availability of new graphene–based nanoribbons with high potential in future spintronics.

36 MATERIALS SCIENCE↗

Modeling the Kondo effect of a magnetic atom adsorbed on graphene

The Kondo effect due to a magnetic atom adsorbed on graphene is investigated using two theoretical approaches, including the non-equilibrium Green's function method within the slave-boson mean-field approximation and a newly developed tight-binding (TB) model with an effectively infinite Hubbard U term. Both methods reveal the presence of a Kondo peak in the local density of state (LDOS) of graphene near the Fermi level. A sharp Kondo peak is only observed in the odd-neighboring C sites of the C atom directly below the magnetic atom placed in top position. The peak intensity is found to decay quickly with respect to the distance between the C site and the magnetic atom. A theoretical model of scanning tunneling microscopy (STM) of graphene is presented as a means to identify the manifestation of the Kondo effect via direct topographic STM measurements. STM simulations show that in the proximity of the magnetic atom, only the C atoms of one sublattice are visible at low bias potential and thus a triangular lattice can be seen, in agreement with recent experiments. Further away from the magnetic atom, the Kondo effect dies down and eventually both sublattices are visible, leading to the recovery of the hexagonal lattice. Furthermore, this work not only provides a new TB method to study the Kondo effect in graphene, but also presents both scanning tunneling spectroscopy and microscopy fingerprints of the Kondo effect to facilitate its experimental verification.

36 MATERIALS SCIENCE↗

Surface-Synthesized Graphene Nanoribbons for Room Temperature Switching Devices: Substrate Transfer and ex Situ Characterization

Recent progress in the on-surface synthesis of graphene nanoribbons (GNRs) has given access to atomically precise narrow GNRs with tunable electronic band gaps which makes them excellent candidates for room temperature switching devices such as field-effect transistors (FET). However, in spite of their exceptional properties, significant challenges remain for GNR processing and characterization. This contribution addresses some of the most important challenges, including GNR fabrication scalability, substrate transfer, long-term stability under ambient conditions, and ex situ characterization. We focus on 7- and 9-atom-wide armchair graphene nanoribbons (i.e., 7-AGNR and 9-AGNR) grown on 200 nm Au(111)/mica substrates using a high throughput system. Transfer of both 7- and 9-AGNRs from their Au growth substrate onto various target substrates for additional characterization is accomplished utilizing a polymer-free method that avoids residual contamination. This results in a homogeneous GNR film morphology with very few tears and wrinkles, as examined by atomic force microscopy. Raman spectroscopy indicates no significant degradation of GNR quality upon substrate transfer and reveals that GNRs have remarkable stability under ambient conditions over a 24 month period. The transferred GNRs are analyzed using multiwavelength Raman spectroscopy, which provides detailed insight into the wavelength dependence of the width-specific vibrational modes. Finally, we characterize the optical properties of 7- and 9-AGNRs via ultraviolet–visible (UV–vis) spectroscopy.

36 MATERIALS SCIENCE↗

Isotope-Engineering the Thermal Conductivity of Two-Dimensional MoS 2

Isotopes represent a degree of freedom that might be exploited to tune the physical properties of materials while preserving their chemical behaviors. In this work, we demonstrate that the thermal properties of two-dimensional (2D) transition-metal dichalcogenides can be tailored through isotope engineering. Monolayer crystals of MoS 2 were synthesized with isotopically pure 100 Mo and 92 Mo by chemical vapor deposition employing isotopically enriched molybdenum oxide precursors. The in-plane thermal conductivity of the 100 MoS 2 monolayers, measured using a non-destructive, optothermal Raman technique, is found to be enhanced by ~50% compared with the MoS 2 synthesized using mixed Mo isotopes from naturally occurring molybdenum oxide. The boost of thermal conductivity in isotopically pure MoS 2 monolayers is attributed to the combined effects of reduced isotopic disorder and a reduction in defect-related scattering, consistent with observed stronger photoluminescence and longer exciton lifetime. Finally, these results shed light on the fundamentals of 2D nanoscale thermal transport important for the optimization of 2D electronic devices.

2D materials↗

Theoretical and Experimental Insight into the Mechanism for Spontaneous Vertical Growth of ReS 2 Nanosheets

We report that rhenium disulfide (ReS 2 ) differs fundamentally from other group-VI transition metal dichalcogenides (TMDs) due to its low structural symmetry, which results in its optical and electrical anisotropy. Although vertical growth is observed in some TMDs under special growth conditions, vertical growth in ReS 2 is very different in that it is highly spontaneous and substrate-independent. In this study, the mechanism that underpins the thermodynamically favorable vertical growth mode of ReS 2 is uncovered. It is found that the governing mechanism for ReS 2 growth involves two distinct stages. In the first stage, ReS 2 grows parallel to the growth substrate, consistent with conventional TMD growth. However, subsequent vertical growth is nucleated at points on the lattice where Re atoms are “pinched” together. At such sites, an additional Re atom binds with the cluster of pinched Re atoms, leaving an under-coordinated S atom protruding out of the ReS 2 plane. This under-coordinated S is “reactive” and binds to free Re and S atoms, initiating growth in a direction perpendicular to the ReS 2 surface. Lastly, the utility of such vertical ReS 2 arrays in applications where high surface-to-volume ratio and electric-field enhancement are essential, such as surface enhanced Raman spectroscopy, field emission, and solar-based disinfection of bacteria, is demonstrated.

36 MATERIALS SCIENCE↗