Engineering Papers⌕ Search

Engineering topics

Merzari, Elia

Publications and source records attributed to Merzari, Elia.

At least 109 records · Page 6

Calculation of Friction Factors and Nusselt Numbers for Twisted Elliptical Tube Heat Exchangers Using Nek5000

Twisted elliptical tube geometries for heat exchanger design are expected to offer significant enhancement in heat transfer with a marginal increase in frictional losses. The presented work focuses on computational fluid dynamics (CFD) simulations of heated molten salt flows through twisted elliptical tube geometries at low modified Froude numbers. In this work, the objectives are to evaluate the available correlations at low Froude numbers and to determine the impact of using a small gap to resolve contact points. The spectral element CFD code Nek5000 was used for all simulations, which were performed in periodic domains of triangular and square unit cells surrounding a single tube through a complete twist using an explicit filtering large eddy simulation (LES) method. The simulation methodology was validated by comparing to the experimental data of Tan et al. Excellent agreement was observed for this comparison. The Dzyubenko correlation for transitional flow was evaluated for a range of Froude numbers. This correlation demonstrated good agreement with LES results at high modified Froude number. As Froude number was decreased toward the bounds of the correlation, the agreement worsened. Cases were then simulated at low Froude number, testing the effects of tube spacing. It was determined that the laminar case for the square unit cell is the most affected by increasing gap size, which should be minimized to mitigate the effect. In the triangular unit cell, the laminar flow regime is also more significantly impacted by increasing gap size compared to the turbulent flow regime which was only marginally impacted.

42 ENGINEERING↗

NEAMS Thermal-Fluids Test Stand for Fluoride-Slat Cooled, High Temperature Reactor Development (Final CRADA Report)

The work performed in this CRADA resulted in significant progress toward the development of a Thermal-fluid test-stand based on NEAMS tools. Significant work has been achieved in this area with simulations performed in Nek5000 of the heat and fluid flow in twisted tube heat exchangers and various software and modeling improvements in SAM geared toward heat exchanger simulations. In particular a set of simulations of flow and heat transfer in twisted elliptical tube geometries has been performed with Nek5000. The method was validated by simulating a case at a moderate Reynolds number and relatively high Froude number. This case was demonstrated to predict a Nusselt number in excellent agreement with the applicable correlation found in literature. It was further shown that at lower Froude numbers, this agreement becomes much worse. Additional cases were then simulated with low Froude numbers for both a square and a triangular unit cell to test the effect of pitch-to-maximum diameter ratio for the purposes of future CFD modeling. The results have proven invaluable to understand the flow physics in twisted tubes and provide reference data for design. Results have been summarized in a conference article. Moreover, work in SAM has led to significant improvement of software quality, the creation of a set of benchmarks for natural circulation and other significant software improvement.

97 MATHEMATICS AND COMPUTING↗

Large Eddy Simulation of the Flow Behavior in a Simplified Helical Coil Steam Generator

Large eddy simulation (LES) is conducted for the flow over the shell side of a helical coil steam generator (HCSG) heat exchanger. Simulations are conducted on a simplified experimental test section that represents a one-column region of the helical coils using half-rods. Although the rods are wall-bounded, the flow still exhibits the turbulent characteristics and fluctuations from vortex shedding that one would expect from crossflow around a cylinder. The spectral element, computational fluid dynamics (CFD) code Nek5000, is used to capture the physics, and the results are compared with particle image velocimetry (PIV) measurements. In order to ensure that the turbulence is resolved, analysis is conducted by using the Taylor length scales and normalized wall distance. Sensitivity to the inlet boundary conditions (BCs) and the spatial discretization for different polynomial order solutions are also studied, finding only minor differences between each case. Pressure drop and velocity statistics show reasonable agreement with PIV. Proper orthogonal decomposition (POD) analysis reveals that the primary modes are similar between experiment and simulation, although the LES predicts higher turbulent kinetic energy than does PIV. Overall, the study establishes the resolution and resources required in order to conduct a high-fidelity simulation over 12 helical rods.

Lai, Jonathan K.↗

Engage second wave ECP/CEED applications

The CEED co-design center aims to impact a wide range of ECP application teams through focused 1-to-1 and 1-to many interactions, facilitated by CEED application liaisons, ultimately targeted to provide easy-to-use discretization libraries for high-order FEM-based application simulations. The goal of this milestone was to extend our reach by identifying a second wave of ECP applications that can benefit from the efficient discretization algorithms and software developed in CEED. These applications were added to the list of the CEED first wave ECP applications (ExaSMR and MARBL), which continue to be main targets for our work. As part of the milestone, we also appointed liaisons on the CEED team that will be responsible for engaging each application, identifying its challenging discretization needs, and outlining a plan for interaction with CEED. Working with all CEED thrusts, the liaisons will be ultimately responsible for ensuring the adoption of CEED technologies in each application as well as for demonstrating their benefits. The selected second wave applications and CEED liaisons are: Urban - liaison Aleks Obabko (ANL), ExaWind - liaison Paul Fischer (UIUC), and ExaAM - liaison Tzanio Kolev (LLNL). In addition to details and results from these efforts, in this document we report on other project-wide activities performed in Q1 of FY19, including: engagements with performing scaling on V100 GPUs, collaboration with ECP/MPICH, participation in ECP/ST’s E4S release, the Laghos-2.0 release, papers, presentations, and other outreach efforts.

97 MATHEMATICS AND COMPUTING↗

Performance tuning of CEED software and first wave apps

The goal of this milestone was the performance tuning of the CEED software and first wave apps. In this milestone, the CEED team developed optimization techniques and tuned for performance the CEED software. Specifically, the focus was on the following: (1) Fast finite element operator storage and evaluation using partial assembly/matrix-free algorithms that take advantage of tensor-product element structure; (2) Architecture optimizations, including the development of performant discretization libraries targeting heterogeneous systems with multi-core CPUs, GPUs, and/or many-core CPUs in single node, cluster, or large-scale ECP supercomputer configurations; and (3) Global kernels for finite element operators, including the development of algorithms and libraries for fast gather-scatter exchanges for action assembly on unstructured graphs and for components needed for global linear solvers. A main part of this milestone was the performance tuning of the CEED first-wave ECP applications. This included the ExaSMR application – Coupled Monte Carlo Neutronics and Fluid Flow Simulation of Small Modular Reactors (ORNL), and the MARBL application – Next-Gen Multi-physics Simulation Code (LLNL). The artifacts delivered include performance improvements in CEED’s 1st wave of applications, and tuned CEED software for various architectures through a number of backends, freely available in the CEED’s repository on GitHub. See the CEED website, http://ceed.exascaleproject.org and the CEED GitHub organization, http://github.com/ceed for more details. In addition to details and results from the above R&D efforts, in this document we are also reporting on other project-wide activities performed in Q4 of FY18 including: CEED’s second annual meeting, a successful minisymposium at the premier international conference on high-order methods (ICOSAHOM), making the CEED milestone reports publicly available, new Laghos release, and other outreach efforts.

97 MATHEMATICS AND COMPUTING↗

Development and validation of two-phase flow models and critical heat flux prediction for the highly-scalable CFD code NEK-2P

A project is underway to develop, verify and validate an advanced two-phase flow modeling capability for the highly-scalable high-performance CFD code NEK5000[1]. The goal of the project is to develop a new two-phase version of the NEK5000code, named NEK-2P, to simulate the two-phase flow and heat transfer phenomena that occur in a Boiling Water Reactor (BWR) fuel bundle under various operating conditions. The NEK-2P two-phase flow models follow the approach used for the Extended Boiling Framework [2-3] previously developed at Argonne, but include more fundamental physical models of boiling phenomena and advanced numerical algorithms for improved computational accuracy, robustness, and computational speed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nek5000 Simulations on Turbulent Coolant Flow in a Fuel Assembly Experiment - AREVA/ANL collaboration for advancing CFD tools

The NEAMS program aims to develop an integrated multi physics simulation capability “pellet to plant” for the design and analysis of future generations of nuclear power plants. In particular, the Reactor Product Line code suite’s multi resolution hierarchy is being designed to ultimately span the full range of length and time scales present in relevant reactor design and safety analyses, as well as scale from desktop to petaflop computing platforms.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The three-dimensional structure of swirl-switching in bent pipe flow

Swirl-switching is a low-frequency oscillatory phenomenon which affects the Dean vortices in bent pipes and may cause fatigue in piping systems. Despite thirty years worth of research, the mechanism that causes these oscillations and the frequencies that characterise them remain unclear. In this paper, we show that a three-dimensional wave-like structure is responsible for the low-frequency switching of the dominant Dean vortex. The present study, performed via direct numerical simulation, focuses on the turbulent flow through a $90^{\circ }$ pipe bend preceded and followed by straight pipe segments. A pipe with curvature 0.3 (defined as ratio between pipe radius and bend radius) is studied for a bulk Reynolds number $Re=11\,700$ , corresponding to a friction Reynolds number $Re_{\unicode[STIX]{x1D70F}}\approx 360$ . Synthetic turbulence is generated at the inflow section and used instead of the classical recycling method in order to avoid the interference between recycling and swirl-switching frequencies. The flow field is analysed by three-dimensional proper orthogonal decomposition (POD) which for the first time allows the identification of the source of swirl-switching: a wave-like structure that originates in the pipe bend. Contrary to some previous studies, the flow in the upstream pipe does not show any direct influence on the swirl-switching modes. Finally, our analysis further shows that a three-dimensional characterisation of the modes is crucial to understand the mechanism, and that reconstructions based on two-dimensional POD modes are incomplete.

42 ENGINEERING↗

CEED-MS8:Initial Integration of CEED Software in ECP Applications

Key components of CEED software development involve fast finite element operator storage and evaluation, architecture optimizations, performant algorithms for all orders, global kernels for finite element operators, efficient use of the memory sub-system, optimal data locality and motion, enhanced scalability and parallelism, and fast tensor contractions. As ultimate goals of the project, CEED is exploring and identifying the best algorithms for the full range of discretizations and applying algorithmic and software development to support ECP applications’ needs. In this milestone we report on the initial integration of CEED software in the selected first-wave ECP/CEED apps and the continued exploration of other ECP applications as second-wave (milestone CEED-MS23) and third-wave (milestone CEED-MS35) ECP/CEED application candidates. An extensive evaluation of various approaches for GPU acceleration of the CEED computational motives is also a major focus of the report, both in the settings of CEED’s Nekbone and Laghos miniapps, as well as versions of CEED’s bake-off problems (introduced in milestone CEED-MS6). The first-wave ECP applications targeted for coupling with CEED software include the ExaSMR and MARBL applications. We also report on near-term collaboration with the seed-funded Urban Systems project, as well as engagements with ACME, ExaAM, GEOS and the Application Assessment and Proxy App projects. The ExaSMR project involves coupled thermal-hydraulics/neutronics, with the latter based on Monte Carlo methods and the former based on high-order discretizations of the Navier-Stokes and energy equations for accurate simulation of turbulent transport. The project requires fast and efficient turbulence simulation capabilities that will scale to exascale platforms. Work within CEED will ensure that all aspects of the Nek5000 workflow scale to the target problem space, which involves > 10 10 degrees of freedom in typical production runs. CEED’s goal is to provide implementations that perform with maximum attainable efficiency and deliver low turn-around times. A deliverable for this milestone is beta-release of the GPU-based variant of Nek5000. MARBL is targeting high-energy-density physics problems, including single fluid multi-material hydrodynamics and radiation/magnetic diffusion simulation, with applications in inertial confined fusion, pulsed power experiments, and equation of state/material strength analysis. The code uses high-order methods based arbitrary Lagrangian-Eulerian, direct Eulerian, and unstructured adaptive mesh refinement. A deliverable for this milestone is collaboration with MARBL for improved performance based on partially-assembled operators. The Urban exascale project is planning to couple real-time data with high performance simulations to study particulate transport in cities. Nek5000 will be used for large eddy and RANS (Reynolds-averaged Navier-Stokes) simulations of turbulent transport in these domains. Areas where the CEED team is aiding the Urban Canyon group include creating high-order meshes for urban geometries and developing boundary conditions appropriate for simulations close to real-life urban conditions. The software artifacts delivered as part of this milestone include GPU-enabled versions of the Nekbone and Laghos miniapps, which are provided through the CEED website, http://ceed.exascaleproject.org and the CEED GitHub organization, http://github.com/ceed. In addition to details and results from the above R&D efforts, in this document we are also reporting on other project-wide activities performed in Q4 of FY17, including: the CEED first annual meeting and participation of CEED researchers in a variety of outreach activities.

97 MATHEMATICS AND COMPUTING↗

Flow-induced vibration analysis of a helical coil steam generator experiment using large eddy simulation

This paper describes a numerical study of flow-induced vibration in a helical coil steam generator experiment conducted at Argonne National Laboratory in the 1980s. In the experiment, a half-scale sector model of a steam generator helical coil tube bank was subjected to still and flowing air and water, and the vibrational characteristics were recorded. The research detailed in this document utilizes the multi-physics simulation toolkit SHARP developed at Argonne National Laboratory, in cooperation with Lawrence Livermore National Laboratory, to simulate the experiment. SHARP uses the spectral element code Nek5000 for fluid dynamics analysis and the finite element code DIABLO for structural analysis. The flow around the coil tubes is modeled in Nek5000 by using a large eddy simulation turbulence model. Transient pressure data on the tube surfaces is sampled and transferred to DIABLO for the structural simulation. The structural response is simulated in DIABLO via an implicit time-marching algorithm and a combination of continuum elements and structural shells. Tube vibration data (acceleration and frequency) are sampled and compared with the experimental data. Currently, only one-way coupling is used, which means that pressure loads from the fluid simulation are transferred to the structural simulation but the resulting structural displacements are not fed back to the fluid simulation

CFD↗

Verification of the Two-Fluid Model in the Spectral Element Code Nek-2P for Adiabatic Flow Conditions

The simulation of multiphase flow is a difficult physical, computational, and numerical problem. Sophisticated tools are necessary to provide results encompassing a wide range of physical phenomena. The development of these tools must be supported by rigorous analysis and ongoing efforts of verification and validation to ensure the accuracy of simulations. The Nek-2P multiphase code is being developed at Argonne with the general goal of simulating a wide range of multiphase flows and the primary goal of simulating boiling flows in LWR fuel assemblies. As part of this, there is an ongoing effort to verify the code and validate the underlying physical models. The objective of this work is to present recent results in the verification of Nek-2P. As a starting point, this work is focused on adiabatic flows for the sake of simplicity with the immediate next planned step to expand the effort to include heat and mass transfer. Details of the verification of the implemented mass fraction transport, momentum conservation, and pressure equations in Nek-2P are presented. Results of simulations are compared to analytic solutions when possible, however due to the complexity of multiphase flows, these are seldom available. To overcome this difficulty, an independent model is used to provide solutions for comparison.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A performance analysis of ensemble averaging for high fidelity turbulence simulations at the strong scaling limit

We analyze the potential performance benefits of estimating expected quantities in large eddy simulations of turbulent flows using true ensembles rather than ergodic time averaging. Multiple realizations of the same flow are simulated in parallel, using slightly perturbed initial conditions to create unique instantaneous evolutions of the flow field. Each realization is then used to calculate statistical quantities. Provided each instance is sufficiently de-correlated, this approach potentially allows considerable reduction in the time to solution beyond the strong scaling limit for a given accuracy. This study focuses on the theory and implementation of the methodology in Nek5000, a massively parallel open-source spectral element code.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct Numerical Simulation of Pebble Bed Flows: Database Development and Investigation of Low-Frequency Temporal Instabilities

Computational analyses of fluid flow through packed pebble bed domains using the Reynolds-averaged NavierStokes framework have had limited success in the past. Because of a lack of high-fidelity experimental or computational data, optimization of Reynolds-averaged closure models for these geometries has not been extensively developed. In the present study, direct numerical simulation was employed to develop a high-fidelity database that can be used for optimizing Reynolds-averaged closure models for pebble bed flows. A face-centered cubic domain with periodic boundaries was used. Flow was simulated at a Reynolds number of 9308 and cross-verified by using available quasi-DNS data. During the simulations, low-frequency instability modes were observed that affected the stationary solution. Furthermore, these instabilities were investigated by using the method of proper orthogonal decomposition, and a correlation was found between the time-dependent asymmetry of the averaged velocity profile data and the behavior of the highest energy eigenmodes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Turbulence statistics in a spectral element code: a toolbox for High-Fidelity Simulations

In the present document we describe a toolbox for the spectral-element code Nek5000, aimed at computing turbulence statistics. The toolbox is presented for a small test case, namely a square duct with L x = 2h, L y = 2h and L z = 4h, where x, y and z are the horizontal, vertical and streamwise directions, respectively. The number of elements in the xy-plane is 16 X 16 = 256, and the number of elements in z is 4, leading to a total of 1,204 spectral elements. A polynomial order of N = 5 is chosen, and the mesh is generated using the Nek5000 tool genbox. The toolbox presented here allows to compute mean-velocity components, the Reynolds-stress tensor as well as turbulent kinetic energy (TKE) and Reynolds-stress budgets. Note that the present toolbox allows to compute turbulence statistics in turbulent flows with one homogeneous direction (where the statistics are based on time-averaging as well as averaging in the homogeneous direction), as well as in fully three-dimensional flows (with no periodic directions, where only time-averaging is considered).

97 MATHEMATICS AND COMPUTING↗

Large-scale large eddy simulation of nuclear reactor flows: Issues and perspectives

Numerical simulation has been an intrinsic part of nuclear engineering research since its inception. In recent years a transition is occurring toward predictive, first-principle-based tools such as computational fluid dynamics. Even with the advent of petascale computing, however, such tools still have significant limitations. In the present work some of these issues, and in particular the presence of massive multiscale separation, are discussed, as well as some of the research conducted to mitigate them. Petascale simulations at high fidelity (large eddy simulation/direct numerical simulation) were conducted with the massively parallel spectral element code Nek5000 on a series of representative problems. These simulations shed light on the requirements of several types of simulation: (1) axial flow around fuel rods, with particular attention to wall effects; (2) natural convection in the primary vessel; and (3) flow in a rod bundle in the presence of spacing devices. Finally, the focus of the work presented here is on the lessons learned and the requirements to perform these simulations at exascale. Additional physical insight gained from these simulations is also emphasized.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

CFD Analysis and Design of Detailed Target Configurations for an Accelerator-Driven Subcritical System

High-fidelity analysis has been utilized in the design of beam target options for an accelerator driven subcritical system. Designs featuring stacks of plates with square cross section have been investigated for both tungsten and uranium target materials. The presented work includes the first thermal-hydraulic simulations of the full, detailed target geometry. The innovative target cooling manifold design features many regions with complex flow features, including 90 bends and merging jets, which necessitate three-dimensional fluid simulations. These were performed using the commercial computational fluid dynamics code STAR-CCM+. Conjugate heat transfer was modeled between the plates, cladding, manifold structure, and fluid. Steady-state simulations were performed but lacked good residual convergence. Unsteady simulations were then performed, which converged well and demonstrated that flow instability existed in the lower portion of the manifold. It was established that the flow instability had little effect on the peak plate temperatures, which were well below the melting point. The estimated plate surface temperatures and target region pressure were shown to provide sufficient margin to subcooled boiling for standard operating conditions. This demonstrated the safety of both potential target configurations during normal operation.

43 PARTICLE ACCELERATORS↗