Engineering topics
Mennesson, Bertrand
Publications and source records attributed to Mennesson, Bertrand.
Flight mask designs of the Roman Space Telescope Coronagraph Instrument
Over the past two decades, thousands of con?rmed exoplanets have been detected; the next major challenge is to characterize these other worlds and their stellar systems. Much information on the composition and formation of exoplanets and circumstellar debris disks can only be achieved via direct imaging. Direct imaging is challenging because of the small angular separations (< 1 arcsec) and high star-to-planet ux ratios (?109 for a Jupiter analog or ?1010 for an Earth analog in the visible). Atmospheric turbulence prohibits reaching such high ux ratios on the ground, so observations must be made above the Earth's atmosphere. The Nancy Grace Roman Space Telescope (Roman), set to launch in the mid-2020s, will be the ?rst space-based observatory to demonstrate high-contrast imaging with active wavefront control using its Coronagraph Instrument. The instrument's main purpose is to mature the various technologies needed for a future agship mission to image and characterize Earth-like exoplanets. These technologies include two high-actuator-count deformable mirrors, photon-counting detectors, two complementary wavefront sensing and control loops, and two di?erent coronagraph types. In this paper, we describe the complete set of ight coronagraph mask designs and their intended combinations in the Roman Coronagraph Instrument. There are three types of mask con?gurations included: a primary one designed to meet the instrument's top-level requirement, three that are supported on a best-e?ort basis, and several unsupported ones contributed by the NASA Exoplanet Exploration Program. The unsupported mask con?gurations could be commissioned and used if the instrument is approved for operations after its initial technology demonstration phase.
Prospects for polarimetry, exozodiacal,and debris disk observations with the Roman Space Telescope Coronagraph Instrument
No abstract provided
Faster exo-Earth yield for HabEx and LUVOIR via EPRV prior knowledge
No abstract provided
ExEP: The Fast Path to Spectra of Earth 2.0 Uses Both Space and Earth Telescopes
No abstract provided
ATSA- A Cold, Active Telescope for Space Astronomy
The National Academies’ Decadal Survey telescope studies have produced mission design concepts that plotpathways into the future to follow on from Hubble, Spitzer, JWST and NGRST. Considering the results of theLUVOIR and HabEx studies in particular, it is clear that segmented mirrors will eventually be needed to providevery large apertures in space and that this architecture presents both a scientific opportunity and an engineeringchallenge. Furthermore, while HabEx and LUVOIR cover a great deal of spectrum, both fall short of the mid-IRregion where general astronomy and astrophysics can be undertaken that would be impossible from terrestrialobservatories and where there also exist spectral features of interest in the search for life. A telescope with similarcapabilities to Habex/LUVOIR but also capable of exoplanet work in spectral regions up to 5 µm would largelybridge the gap between those proposals and TPF-I (which would have operated from about 7 µm upwards), andis therefore worthy of study. The Active Telescope for Space Astronomy (ATSA) design study presents a possiblearchitecture and is moderately sized (6 m) to enable the use of both starshade and coronagraph technologies.While the segment gaps of a segmented primary mirror present a challenge for coronagraphy, the architecturedoes allow direct wavefront control at each segment of that mirror, enabling a great degree of control at theprimary source of contrast degradation. While active systems (for example, deformable mirrors on WFIRSTCGI) are being incorporated into telescope designs today, a fully active mirror system needs further developmentfor a future mission. With this concept in mind, and intending to build on the LUVOIR and HabEx studies, wediscuss the elements of a cooled telescope design enabling both general astrophysics and exoplanet studies fromthe near UV through to the near-IR.
The Habitable Exoplanet Observatory (HabE) Mission Concept
The Habitable Exoplanet Observatory (HabEx), was one of four candidate flagship missions studied in detail by NASA, which were submitted for consideration to the 2020 Decadal Survey in Astronomy and Astrophysics for possible launch in the 2030s. For the first time in human history, technologies have matured sufficiently to enable an affordable spacebased telescope mission capable of discovering and characterizing Earthlike planets orbiting nearby bright sunlike stars to search for signs of habitability and biosignatures. Such a mission can also be equipped with instrumentation that will enable broad and exciting general astrophysics and planetary science not possible from current or planned facilities. HabEx was designed to be the Great Observatory of the 2030s and beyond, with unique imaging and multi-object spectroscopic capabilities at wavelengths ranging from ultraviolet (UV) to near-IR.