Engineering topics
Publications and source records attributed to Meinel, M. P..
Inflatable optics have the potential for a large reduction in lauch mass and volume, but they involve significant challenges to achieve the wavefront accuracy requred for diffraction-limited operation in the visible and near IR.
A Folded Astronomical Space Telescope (FAST) is a 2.4-m Hubble Space Telescope (HST) class of telescope that can be packaged in a 1.5-m diameter cylinder through use of a single ring of eight deployable segments. Because it has less mass and uses a much smaller booster to inject it into orbit, the cost is greatly reduced.
The object of the invention is to compensate for errors in a large telescope primary reflector by making certain compensating deviations in a smaller, auxiliary reflector of the telescope. At least one intermediate element forms an image of the primary surface onto the secondary surface, so each point on the secondary surface corresponds to a point on the primary surface. The secondary surface is formed with a deviation from an ideal secondary surface, with the piston distance of each point on the actual secondary surface equal to the piston distance of a corresponding piston on the actual primary surface from the ideal primary surface. It is found that this results in electromagnetic (e.g., light) rays which strike a deviating area of the actual primary surface being brought to the same focus as if the actual primary surface did not have a diviation from an ideal primary surface.
The production of wave-front correctors by single-point diamond turning is reported. Interferograms are shown which demonstrate excellent agreement between the diamond-turned surface and the desired surface. It is concluded from this experiment that it is now feasible by means of single-point diamond turning to make generalized wave-front control surfaces or to produce any unusual surface desired by the optical designer. The maximum departure from the nearest regular surface is set by the dynamic range and maximum diamond point acceleration permitted by the machine.
The development of optical telescopes from the age of astrology to those of today and the future is discussed. The rationales for changes in the design of telescopes during this time are explored. The cost drivers, and how to reduce them, are also discussed.
Telescopes had tended to follow established designs until costs made it essential to look toward significant departures from conventional designs. Attempts to introduce some new concepts were without success until the Multiple Mirror Telescope broke the established pattern. Now several new possibilities are being engineered for the very large telescopes of the future.
Optical science and technology concepts for a large deployable reflector for far-infrared and submillimeter astronomy from above the earth's atmosphere are discussed. Requirements given at the Asilomar Conference are reviewed. The technical challenges of this large-aperture (about 20-meter) telescope, which will be diffraction limited in the infrared, are highlighted in a brief discussion of one particular configuration.
Both the theoretical reasons for considering a non-circular format for the Large Deployable Reflector, and a potentially realizable concept for such a device, are discussed. The optimum systems for diffraction limited telescopes with incoherent detection have either a single filled aperture, or two such apertures as an interferometer to synthesize a larger aperture. For a single aperture of limited area, a reflector in the form of a slot can be used to give increased angular resolution. It is shown how a 20 x 8 meter telescope can be configured to fit the Space Shuttle bay, and deployed with relatively simple operations. The relationship between the sunshield design and the inclination of the orbit is discussed. The possible use of the LDR as a basic module to permit the construction of supergiant space telescopes and interferometers both for IR/submm studies and for the entire ultraviolet through mm wave spectral region is discussed.