Engineering Papers⌕ Search

Engineering topics

Mclellan, R. B.

Publications and source records attributed to Mclellan, R. B..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Notch sensitivity of hydrogenated oxygen-strengthened titanium

While earlier studies have shown that the tensile properties and fracture test intensity factors of oxygen-strengthened Ti remain nearly unaffected by the presence of about 70 ppm (weight) hydrogen, the Charpy V-notch test-determined impact properties of oxygen-bearing Ti are strongly affected by the presence of hydrogen. The present study establishes that, concurrently with the strengthening effect of oxygen, there is a substantial lowering of ductility. The presence of hydrogen has virtually no effect on the notch strength of Ti alloys of either low or high oxygen content, where hydrogen contents lie in the 25-80 range.

Wasz, M. L.↗
NASA NTRS1990

The fast diffusion of Au IN Pb

A treatment of the phenomenon of fast diffusion in lead is presented. The model used is based upon the fast diffusion of free solute interstitials. The very large negative enhancement coefficients found in the Pb-(Au, Ag) systems is explained by the formation of first and second order clusters of vacancies and substitutional solute atoms.

Mclellan, R. B.↗
NASA NTRS1990

The effect of hydrogen on the fracture toughness of oxygen-strengthened titanium

Studies of oxygen-strengthened titanium alloys have indicated that while hydrogen has little effect on tensile properties, it causes a marked decrease in impact strength. It is presently established experimentally that the presence of hydrogen has essentially no effect on the fracture-toughness factor at the onset of crack propagation, in commercial-grade titanium alloys containing either low or high concentrations of oxygen. These findings are congruent with other study results on the tensile properties of these alloys, but contrast with the previously noted pronounced effect of hydrogen on impact resistance.

Wasz, M. L.↗
NASA NTRS1989

The effect of hydrogen on mechanical properties of oxygen-strengthened titanium

The effect of oxygen on the hydrogen embrittlement in titanium was investigated in two Ti-based alloys containing different amounts of oxygen: 0.064 and 0.154, in wt pct. Tensile, impact, and hardness tests were performed with and without prior hydrogenation of the specimens. Results show that, while the presence of hydrogen, even in relatively small amounts, will not affect the hardness or room-temperature tensile properties determined at relatively slow strain rates, hydrogen will reduce significantly the impact resistance, as determined by the Charpy V-notch test. This deleterious effect on the impact resistance was found to be exacerbated by an increase of oxygen in the alloy.

Wasz, M. L.↗
NASA NTRS1975

Hydrogen interactions with metals

Review of the literature on the nature and extent of hydrogen interactions with metals and the role of hydrogen in metal failure. The classification of hydrogen-containing systems is discussed, including such categories as covalent hydrides, volatile hydrides, polymeric hydrides, and transition metal hydride complexes. The use of electronegativity as a correlating parameter in determining hydride type is evaluated. A detailed study is made of the thermodynamics of metal-hydrogen systems, touching upon such aspects as hydrogen solubility, the positions occupied by hydrogen atoms within the solvent metal lattice, the derivation of thermodynamic functions of solid solutions from solubility data, and the construction of statistical models for hydrogen-metal solutions. A number of theories of hydrogen-metal bonding are reviewed, including the rigid-band model, the screened-proton model, and an approach employing the augmented plane wave method to solve the one-electron energy band problem. Finally, the mechanism of hydrogen embrittlement is investigated on the basis of literature data concerning stress effects and the kinetics of hydrogen transport to critical sites.

Mclellan, R. B.↗
NASA NTRS1973

The solubility of hydrogen in rhodium, ruthenium, iridium and nickel.

The temperature variation of the solubility of hydrogen in rhodium, ruthenium, iridium, and nickel in equilibrium with H2 gas at 1 atm pressure has been measured by a technique involving saturating the solvent metal with hydrogen, quenching, and analyzing in resultant solid solutions. The solubilities determined are small (atom fraction of H is in the range from 0.0005 to 0.00001, and the results are consistent with the simple quasi-regular model for dilute interstitial solid solutions. The relative partial enthalpy and excess entropy of the dissolved hydrogen atoms have been calculated from the solubility data and compared with well-known correlations between these quantities.

Mclellan, R. B.↗
NASA NTRS1971

Thermodynamic properties of carbon in b.c.c. and f.c.c. iron-silicon-carbon solid solutions.

The equilibrium between hydrogen-methane gas mixtures and Fe-Si-C solid solutions has been investigated both as a function of temperature and carburizing gas composition. The thermodynamic properties of the carbon atoms in both b.c.c. and f.c.c. solid solution have been derived from the equilibrium measurements. The results found have been compared with those of earlier investigations and with the predictions of recent theoretical models on ternary solid solutions containing both substitutional and interstitial solute atoms.

Chraska, P.↗
NASA NTRS1971

Stress corrosion in titanium alloys and other metallic materials

Multiple physical and chemical techniques including mass spectroscopy, atomic absorption spectroscopy, gas chromatography, electron microscopy, optical microscopy, electronic spectroscopy for chemical analysis (ESCA), infrared spectroscopy, nuclear magnetic resonance (NMR), X-ray analysis, conductivity, and isotopic labeling were used in investigating the atomic interactions between organic environments and titanium and titanium oxide surfaces. Key anhydrous environments studied included alcohols, which contain hydrogen; carbon tetrachloride, which does not contain hydrogen; and mixtures of alcohols and halocarbons. Effects of dissolved salts in alcohols were also studied. This program emphasized experiments designed to delineate the conditions necessary rather than sufficient for initiation processes and for propagation processes in Ti SCC.

Harkins, C. G.↗
NASA NTRS1971

Ordering in CuAu

Rapidly quenched CuAu ordered state development on low temperature annealing, presenting Young modulus variation as function of heat treatment time

Brotzen, F. R.↗
NASA NTRS1971

A statistical mechanical calculation of the thermodynamic properties of interstitial solid solutions involving second nearest neighbor interactions.

A previous calculation of the thermodynamic properties of interstitial solid solutions based on the technique of Kirkwood expansions has been extended to include the effects of second nearest neighbor solute atom mutual interactions. The error inherent in the first order (or quasi-chemical) counting of the degeneracy of the solution crystal is avoided. It is shown that, at high temperatures, even strong second nearest neighbor solute mutual interactions have a negligible effect on the entropy of the solution and a small, temperature-dependent effect on the solute partial enthalpy.

Alex, K.↗