Engineering topics

McMurray, Jacob W.

Publications and source records attributed to McMurray, Jacob W..

3 records

DOE OSTI2024

Boron and lithium aqueous thermochemistry to model crud deposition in pressurized water reactors

Here, a comprehensive database of boron and lithium aqueous thermochemistry has been developed for use at elevated temperatures. The Helgeson-Kirkham-Flowers (HKF) formalism provides a framework to describe thermodynamic properties over a broad range of temperatures and pressures. Accuracy at high temperatures is vital to modeling nickel oxide and ferrite fuel deposits that occur in pressurized water nuclear reactors (PWRs). CALPHAD (CALculation of PHAse Diagrams) calculations are performed at PWR crud conditions to predict the stability regions of the solid lithium metaborate (LiBO 2 ) and lithium tetraborate (Li 2 B 4 O 7 ) precipitates. In addition, similar calculations are performed using sodium and potassium instead of lithium in order to assess the thermodynamics associated with preventing the formation of such precipitates. This database contributes to understanding of crud formation and composition and will aid in the prediction of phenomena such as Crud-Induced Power Shifts (CIPS).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Indirect additive manufacturing process for producing SiC—B4C—Si composites

A method for indirect additive manufacturing of an object constructed of boron carbide, silicon carbide, and free silicon, comprising: (i) producing a porous preform constructed of boron carbide and silicon carbide by an indirect ceramic additive manufacturing (ICAM) process in which particles of a powder mixture become bonded together with an organic binder, wherein the powder mixture comprises: a) boron carbide particles, and b) silicon carbide particles, wherein at least 80 vol % of the silicon carbide particles are larger than the boron carbide particles; and wherein the boron carbide and silicon carbide particles are each included in an amount of 40-60 wt. % of the powder mixture, provided that the foregoing amounts sum to at least 95 wt. %; (ii) subjecting the porous preform to a temperature of 500-900° C. to volatilize the organic binder; and (iii) infiltrating molten silicon into pores of the porous preform to produce the object.

Cramer, Corson L.↗

DOE OSTI2022

Assessment of Molten Eutectic LiF-NaF-KF Density through Experimental Determination and Semiempirical Modeling

Molten salts have favorable material properties for use in high-temperature energy systems, including thermal energy storage systems, concentrating solar power plants, nuclear reactors, and various industrial manufacturing processes. Knowledge of chemical and thermophysical property data is essential for the design and optimization of these systems, yet data are often limited or uncertain for many candidate salts due to the difficulty of thermophysical property measurements at relevant temperatures (e.g., 500–900 °C). Here, the density of molten LiF-NaF-KF eutectic is reassessed through review of previous experimental data, new density measurements from 470 to 800 °C, and semiempirical modeling. Additionally, the density was measured using the displacement technique. Compositional and temperature-dependent density estimates were calculated with a multidimensional Redlich–Kister model. The results of the new experimental measurements agree within 2% of the modeled density of molten eutectic LiF-NaF-KF. The Redlich–Kister model’s prediction shows a near-ideal density behavior for the LiF-NaF-KF system and is promising for the estimation of off-eutectic LiF-NaK-KF densities. Finally, through review of the existing literature and comparison to new measurements, recommendations are made for the density of LiF-NaF-KF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗