McLeod, Christopher | Engineering Papers

NASA NTRS2012

Orion - Super Koropon(Registered Trademark) Torque/Tension Report

The primary objective of this testing was to obtain torque tension data for the use of Super Koropon Primer Base which was proposed for use on the Orion project. This compound is a corrosion inhibitor/sealer used on threaded fasteners and inserts as specified per NASA/JSC PRC-4004, Sealing of Joints and Faying Surfaces. Some secondary objectives of this testing, were to identify the effect on torque coefficient of several variables. This document contains the outcome of the testing.

Hemminger, Edgar G.↗

NASA NTRS2004

Goddard Space Flight Center's Structural Dynamics Data Acquisition System

Turnkey Commercial Off The Shelf (COTS) data acquisition systems typically perform well and meet most of the objectives of the manufacturer. The problem is that they seldom meet most of the objectives of the end user. The analysis software, if any, is unlikely to be tailored to the end users specific application; and there is seldom the chance of incorporating preferred algorithms to solve unique problems. Purchasing a customized system allows the end user to get a system tailored to the actual application, but the cost can be prohibitive. Once the system has been accepted, future changes come with a cost and response time that's often not workable. When it came time to replace the primary digital data acquisition system used in the Goddard Space Flight Center's Structural Dynamics Test Section, the decision was made to use a combination of COTS hardware and in-house developed software. The COTS hardware used is the DataMAX II Instrumentation Recorder built by R.C. Electronics Inc. and a desktop Pentium 4 computer system. The in-house software was developed using MATLAF3 from The Mathworks. This paper will describe the design and development of the new data acquisition and analysis system.

McLeod, Christopher↗

NASA NTRS2004

Upgrade of the Goddard Space Flight Center's Mass Properties Measuring Facility

Goddard Space Flight Center has a Mass Properties Measuring Facility (MPMF), which is used to measure weight, center of gravity, moment of inertia, and product of inertia of satellites and space flight hardware. The system was originally purchased more than 30 years ago. While the MPMF was still in good mechanical condition, the measurement and control subsystem had begun to experience more frequent component failures. Many of the outdated, discrete components in the system are no longer available for replacement. A decision was made to upgrade the measurement and control subsystem of the MPMF to improve its reliability and reduce the chance of component failures leading to extended facility outages. This paper will describe details of the upgraded subsystems and summarize the new performance capabilities of the system.

Ross, Brian P.↗

NASA NTRS2004

Goddard Space Flight Center's Structural Dynamics Data Acquisition System

Turnkey Commercial Off The Shelf (COTS) data acquisition systems typically perform well and meet most of the objectives of the manufacturer. The problem is that they seldom meet most of the objectives of the end user. The analysis software, if any, is unlikely to be tailored to the end users specific application; and there is seldom the chance of incorporating preferred algorithms to solve unique problems. Purchasing a customized system allows the end user to get a system tailored to the actual application, but the cost can be prohibitive. Once the system has been accepted, future changes come with a cost and response time that's often not workable. When it came time to replace the primary digital data acquisition system used in the Goddard Space Flight Center's Structural Dynamics Test Section, the decision was made to use a combination of COTS hardware and in-house developed software. The COTS hardware used is the DataMAX II Instrumentation Recorder built by R.C. Electronics Inc. and a desktop Pentium 4 computer system. The in-house software was developed using MATLAB from The MathWorks. This paper will describe the design and development of the new data acquisition and analysis system.

McLeod, Christopher↗

NASA NTRS2004

Upgrade of the Goddard Space Flight Center's Mass Properties Measuring Facility

Goddard Space Flight Center has a Mass Properties Measuring Facility (MPMF), which is used to measure weight, center of gravity, moment of inertia, and product of inertia of satellites and space flight hardware. The system was originally purchased more than 30 years ago. While the MPMF was still in good mechanical condition, the measurement and control subsystem had begun to experience more frequent component failures. Many of the outdated, discrete components in the system are no longer available for replacement. A decision was made to upgrade the measurement and control subsystem of the MPMF to improve its reliability and reduce the chance of component failures leading to extended facility outages. This paper will describe details of the upgraded subsystems and summarize the new performance capabilities of the system.

Ross, Brian P.↗