Engineering Papers⌕ Search

Engineering topics

McBrayer, Josefine D.

Publications and source records attributed to McBrayer, Josefine D..

At least 19 records

Composite Ionogel Electrodes for Polymeric Solid-State Li-Ion Batteries

Realizing rechargeable cells with practical energy and power density requires electrodes with high active material loading, a remaining challenge for solid-state batteries. Here, we present a new strategy based on ionogel-derived solid-state electrolytes (SSEs) to form composite electrodes that enable high active material loading (>10 mg/cm 2 , ~9 mA/cm 2 at 1C) in a scalable approach for fabricating Li-ion cells. By tuning the precursor and active materials composition incorporated into the composite lithium titanate electrodes, we achieve near-theoretical capacity utilization at C/5 rates and cells capable of stable cycling at 5.85 mA/cm 2 (11.70 A/g) with over 99% average Coulombic efficiency at room temperature. Finally, we demonstrate a complete polymeric solid-state cell with a composite anode and a composite lithium iron phosphate cathode with ionogel SSEs, which is capable of stable cycling at a 1C rate.

25 ENERGY STORAGE↗

Chemical contributions to silicon anode calendar aging are dominant over mechanical contributions

Silicon (Si) anodes are a promising candidate for increasing the energy density of lithium (Li)-ion batteries for electric vehicles. However, they have recently been identified as having poor calendar life that is insufficient for commercial needs, in addition to the well-known issue of their poor cycle life resulting from large volume expansion. Here, a specially designed protocol with variable rest periods between intermittent cycling is used to evaluate the impact of the mechanical disruption of Si and solid electrolyte interphase (SEI) from cycling on calendar aging measurements. Si was found to undergo more mechanical degradation during calendar aging with intermittent cycling than graphite. However, Si anode capacity fade was still dominated by time, especially for rest periods greater than or equal to 1 month between cycling. Postmortem dQ/dV half-cell analysis indicated this was mainly due to Li inventory loss and an increase in electrode resistance. Isothermal microcalorimetry further demonstrated that Si passivation is more disrupted than graphite passivation with intermittent cycling and suggested that there may be a chemical buildup of a detrimental species in the electrolyte, leading to a large spike in heat after the Si and SEI are disrupted by cycling.

25 ENERGY STORAGE↗

Overcoming magnetic susceptibility broadening in NMR of coin cell batteries to achieve chemical resolution

We develop methods for previously introduced NMR hardware that enables sensitive, noninvasive spectroscopic study of coin cell batteries, by overcoming the magnetic field distortions intrinsic to the battery limited chemical resolution. Specifically, we employ an interferometric NMR technique to overcome field heterogeneity, reducing peak widths by two orders of magnitude and obtaining chemically resolved solution-state spectra.

25 ENERGY STORAGE↗

Critical Evaluation of Potentiostatic Holds as Accelerated Predictors of Capacity Fade during Calendar Aging

Li-ion batteries will lose both capacity and power over time due to calendar aging caused by slow parasitic processes that consume Li + ions. Studying and mitigating these processes is traditionally an equally slow venture, which is especially taxing for the validation of new active materials and electrolyte additives. Here, we evaluate whether potentiostatic holds can be used to accelerate the diagnosis of Li + loss during calendar aging. The technique is based on the idea that, under the right conditions, the current measured as the cell voltage is held constant can be correlated with the instantaneous rate of side reactions. Thus, in principle, these measurements could capture the rate of capacity fade in real time . In practice, we show that this method is incapable of quantitatively forecasting calendar aging trends. Instead, our study demonstrates that potentiostatic holds can be applied for initial qualitative screening of systems that exhibit promising long-term stability, which can be useful to shrink the parameter space for calendar aging studies. By facilitating the identification of improved formulations, this approach can help accelerate innovation in the battery industry.

25 ENERGY STORAGE↗

Calendar aging of silicon-containing batteries

High-energy batteries for automotive applications require cells to endure well over a decade of constant use, making their long-term stability paramount. This is particularly challenging for emerging cell chemistries containing silicon, for which extended testing information is scarce. While much of the research on silicon anodes has focused on mitigating the consequences of volume changes during cycling, comparatively little is known about the time-dependent degradation of silicon-containing batteries. Here we discuss a series of studies on the reactivity of silicon that, collectively, paint a picture of how the chemistry of silicon exacerbates the calendar aging of lithium-ion cells. Assessing and mitigating this shortcoming should be the focus of future research to fully realize the advantages of this battery technology.

25 ENERGY STORAGE↗

Study of Polysulfide Speciation in Lithium Sulfur Batteries using in situ Confocal Raman Microscopy: Introduction

A transition to sustainable energy is among society’s greatest challenges. With this change, the development of more efficient, safe, and cost-effective batteries is also necessary. Batteries are becoming ever more integral to today’s technology rich world. 3 Intermittent power sources, such as wind and solar, require storage devices to deliver a consistent energy supply. More ecofriendly, electric vehicles, have limited travel distances due to low energy density batteries. Phones and other personal electronics are also reliant on battery performance. An encouraging improvement in specific energy from current, lithium (Li) ion batteries, which are already nearing the bounds of their performance potential, are lithium sulfur (Li-S) batteries.

25 ENERGY STORAGE↗

EERE Silicon Electrolyte Interface Stabilization (SIESta) FY19 Q2 Report

This quarter, we have focused on characterizing the electrochemical of native oxide and "pristine' silicon surfaces by electrochemical cycling for various conditions, starting with either a freshly etched Si surface, or varying amounts of oxide on the surface (either native grown or deposited). These changes can be used to determine if the pristine surface evolves differently than those that have been modified (Q1 milestone). We are also developing new diagnostics (microcalorimetry and stress measurement in-situ) to determine how the nature of the silicon surface affects the composition, function, and thickness of the SEI (Q2 milestone).

36 MATERIALS SCIENCE↗

Silicon Electrolyte Interface Stabilization (SEISTa)

This quarter, we have focused on characterizing the electrochemical response, both through cyclic voltammetry and through constant current charge/discharge characterization of the silicon samples coated with silicates containing varying amounts of Li in the SiOx layer. These studies were performed using a standard Gen-2 electrolyte without FEC. We also performed electrochemical impedance spectroscopy on samples exposed to the Gen-2 electrolyte continually, and collected EIS spectra as a function of time and temperature.

30 DIRECT ENERGY CONVERSION↗

Polysulfide Speciation in the Bulk Electrolyte of a Lithium Sulfur Battery

In situ Raman microscopy was used to study polysulfide speciation in the bulk ether electrolyte during the discharge and charge of a Li-S electrochemical cell to assess the complex interplay between chemical and electrochemical reactions in solution. During discharge, long chain polysulfides and the S 3 - radical appear in the electrolyte at 2.4 V indicating a rapid equilibrium of the dissociation reaction to form S 3 - . When charging, however, an increase in the concentration of all polysulfide species was observed. This highlights the importance of the electrolyte to sulfur ratio and suggests a loss in the useful sulfur inventory from the cathode to the electrolyte.

25 ENERGY STORAGE↗