Engineering Papers⌕ Search

Engineering topics

Matsumoto, Ray A.

Publications and source records attributed to Matsumoto, Ray A..

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Direct Correlation of the Salt-Reduced Diffusivities of Organic Solvents with the Solvent’s Mole Fraction

We report that lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in organic solvents (especially propylene carbonate) has demonstrated extraordinary pseudocapacitive performance as an electrolyte in the supercapacitor configuration. However, the influence of the solvated ions on the diffusivity of the solvent molecules is yet to be understood. We examine the impact of LiTFSI on the diffusivity in five organic solvents: acetonitrile (ACN), tetrahydrofuran (THF), methanol (MeOH), dimethyl sulfoxide (DMSO), and propylene carbonate (PC) using a combination of neutron scattering, conductivity measurements, and molecular dynamics simulations. The extent of the diffusivity reduction in the concentration regime of ≤1 M directly correlates with the solvent mole fraction at which the solvation shells around Li + ions are of similar size in all the solvents, resulting in a universal ~50% reduction in the solvent diffusivity. These results provide guidance for formulation of the new electrolytes to enhance the performance of energy storage devices.

conductivity↗
DOE OSTI2021

Investigating the Accuracy of Water Models through the Van Hove Correlation Function

In this study, we present molecular-simulation-based calculations of the Van Hove correlation function (VHF) of water using multiple modeling approaches: classical molecular dynamics with simple three-site nonpolarizable models, with a polarizable model, and with a reactive force field; density functional tight-binding molecular dynamics; and ab initio molecular dynamics. Due to the many orders of magnitude difference in the computational cost of these approaches, we investigate how small and short the simulations can be while still yielding sufficiently accurate and interpretable results for the VHF. We investigate the accuracy of the different models by comparing them to recently published inelastic X-ray scattering measurements of the VHF. We find that all of the models exhibit qualitative agreement with the experiments, and in some models and for some properties, the agreement is quantitative. This work lays the foundation for future simulation approaches to calculating the VHF for aqueous solutions in bulk and under nanoconfinement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Engineering the Interlayer Spacing by Pre-Intercalation for High Performance Supercapacitor MXene Electrodes in Room Temperature Ionic Liquid

MXenes exhibit excellent capacitance at high scan rates in sulfuric acid aqueous electrolytes, but the narrow potential window of aqueous electrolytes limits the energy density. Organic electrolytes and room-temperature ionic liquids (RTILs) can provide higher potential windows, leading to higher energy density. The large cation size of RTIL hinders its intercalation in-between the layers of MXene limiting the specific capacitance in comparison to aqueous electrolytes. In this work, different chain lengths alkylammonium (AA) cations are intercalated into Ti 3 C 2 T x , producing variation of MXene interlayer spacings (d-spacing). AA-cation-intercalated Ti 3 C 2 T x (AA-Ti 3 C 2 ), exhibits higher specific capacitances, and cycling stabilities than pristine Ti 3 C 2 T x in 1 m 1-ethly-3-methylimidazolium bis-(trifluoromethylsulfonyl)-imide (EMIMTFSI) in acetonitrile and neat EMIMTFSI RTIL electrolytes. Pre-intercalated MXene with an interlayer spacing of ≈2.2 nm, can deliver a large specific capacitance of 257 F g –1 (1428 mF cm –2 and 492 F cm –3 ) in neat EMIMTFSI electrolyte leading to high energy density. Quasi elastic neutron scattering and electrochemical impedance spectroscopy are used to study the dynamics of confined RTIL in pre-intercalated MXene. Furthermore, molecular dynamics simulations suggest significant differences in the structures of RTIL ions and AA cations inside the Ti 3 C 2 T x interlayer, providing insights into the differences in the observed electrochemical behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Diffusivity and Structure of Room Temperature Ionic Liquid in Various Organic Solvents

Room-temperature ionic liquids (RTILs) hold promise for applications in electric double layer capacitors (EDLCs), owing to a much wider potential window, lower vapor pressure, and better thermal and chemical stabilities compared to conventional aqueous and organic electrolytes. However, because the low diffusivity of ions in neat RTILs negates the EDLCs’ advantage of high power density, the ionic liquids are often used in mixture with organic solvents. In this study, we measured the diffusivity of cations and anions in RTIL, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) ([BMIM + ][TFSI – ]), mixed with 10 organic solvents, by using the pulsed-field gradient NMR method. The ion diffusivity was found to follow that of neat solvents and in most studied solvents showed an excellent agreement with the predicted values reported in the recent molecular dynamics (MD) study [Thompson, M. W.; J. Phys. Chem. B 2019, 123, 1340-1347]. In two solvents consisting of long-chain molecules, however, the MD simulations predictions slightly underestimated the ionic diffusivities. The degree of ion dissociation was also estimated for each solvent by comparing the ionic conductivity with the molar conductivity derived from the diffusion measurements. The degree of ion dissociation and the hydrodynamic radius of ions suggest that the ions are coordinated by ~1 solvent molecule. Finally, the scarcity of solvent–ion interactions explains the fact that the diffusivity of ions in the mixture significantly depends on the viscosity of the solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Critical Role of Anion–Solvent Interactions for Dynamics of Solvent-in-Salt Solutions

Most polar solvent molecules are unstable toward electrode materials used in Li-based batteries. Solid electrolytes and ionic liquids are far more stable; however, they have relatively low conductivity, and therefore electrical energy storage devices based on them would suffer from low power. Solvent-in-salt (SIS) systems combine chemical stability with relatively high conductivity. Here, we show how the nature of the employed anion affects the structure and dynamics of SIS systems. The transport of ions in lithium bis(fluorosulfonyl)imide (Li-FSI) systems was determined to be always faster than that in lithium bis(trifluoromethanesulfonyl)imide (Li-TFSI) systems. Moreover, we found that viscosity does not solely control conductivity and that the lower conductivity of TFSI – solutions is related to their stronger interaction with the solvent. This restricts solvent dynamics and slows down ion motions compared to that of FSI – . Interestingly, the TFSI–solvent interaction also leads to better charge separation (weaker ion–ion correlations) and a higher transference number for Li. Finally, our results suggest that the ability to tune the solvent network formed around the anions may further improve electrolyte conductivity and Li transference number for safer and more efficient energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗