First results from the search for an excess of ν ¯ e events in JSNS2
Explore the source record for details and available documents.
36 MATERIALS SCIENCE↗
Engineering topics
Masuda, S.
Publications and source records attributed to Masuda, S..
PMT calibration for the JSNS^2-II far detector with an embedded LED system
The JSNS^2-II (the second phase of JSNS^2, J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment aimed at searching for sterile neutrinos. Here, this experiment has entered its second phase, employing two liquid scintillator detectors located at near and far positions from the neutrino source. Recently, the far detector of the experiment has been completed and is currently in the calibration phase. The following properties of all functioning Photo-Multiplier-Tubes (PMTs) to detect the neutrino events in the far detector have been calibrated: PMT gain, its dependence of supplied High Voltage (HV), Peak-to-Valley (PV), and signal timing. This paper presents a detailed description of the calibration process utilizing the LED system. The LED system of the far detector uses two Ultra-Violet (UV) LEDs, which are effective in calibrating all of the PMTs at once. The UV light is converted into the visible light wavelengths inside liquid scintillator via the wavelength shifters, providing pseudo-isotropic light. To achieve a good energy resolution for physics events, a relative gain adjustment of up to 10% is required for all functioning PMTs. This will be achieved using the HV curves measured and the results of the LED calibration. The Peak-to-Valley (PV) ratio values, which distinguish the single photo-electron signal from the pedestal, are similar to those from the production company. Additionally, the precision of the PMT signal timing is measured to be 2.1 ns. This meets the event reconstruction requirement of 10 ns.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Muon tagging with flash ADC waveform baselines
Here, this manuscript describes an innovative method to tag muons using the baseline information of the Flash ADC (FADC) waveform of PMTs in the JSNS 2 (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) experiment. The experiment is designed to search for evidence of sterile neutrinos, and a reliable method for muon tagging is an essential component for background rejection because the detector is located above ground, on the 3rd floor of the J-PARC Material and Life Science Experimental Facility (MLF). Cosmogenic muons that stop within the detector volume and produce a Michel electron are a particularly important background that must be rejected for our sterile neutrino search. Utilizing this innovative method, more than 99.8 % of Michel electrons can be rejected even without using information from the detector’s veto region PMTs. This technique can be employed by any experiments which uses a similar detector configuration.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Evaluation of the performance of event reconstruction algorithms in the JSNS 2 experiment using a 252 Cf calibration source
JSNS 2 investigates short-baseline neutrino oscillations using a 24-meter baseline and a 17-tonne Gd-loaded liquid scintillator target. Accurate event-reconstruction algorithms are crucial for analyzing experimental data. The algorithms undergo meticulous validation through calibration with a 252 Cf source. This paper outlines the methodology and evaluates the reconstruction performance, focusing on neutrino interactions up to approximately 50 MeV for sterile neutrino searches. Both 252 Cf and Michel electron events are studied to evaluate reconstruction accuracy. The analysis concludes that the uncertainty of the fiducial volume, with an appropriate correction, is much less than the requirement of JSNS 2 requirement (10%). Furthermore, the energy resolution is measured to be 3.3 ± 0.1% for the Michel electron endpoint and 4.3 ± 0.1% for the n-Gd peak in the central region.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Two-Step Development of Geomagnetic Storms
By using the Dst index, more than 1200 geomagnetic storms, from weak to intense, spanning over three solar cycles have statistically been examineds.
Geomagnetic↗
Characteristics of hard X-ray double sources in impulsive solar flares
Imaging observations of solar flare hard X-ray sources with the Hard X-ray Telescope (HXT) aboard the Yohkoh satellite have revealed that hard X-ray emissions (greater than 30 ke V) originate most frequently from double sources. The double sources are located on both sides of the magnetic neutral line, suggesting that the bulk of hard X-rays is emitted from footpoints of flaring magnetic loops. We also found that hard X-rays from the double sources are emitted simultaneously within a fraction of second and that the weaker source tends to be located in the stronger magnetic field region, showing a softer spectrum. Physcial implications on the observed characteristics of the hard X-ray double sources are discussed.
Sakao, T.↗
Performance Of Perfluoropolyalkylether Lubricant System
Perfluoro-polyalkylethers (PFPAE) constitute class of fluids having characteristics of high thermal oxidative stability, good vicosity-temperature characteristics, good elastohydrodynamic film-forming capabilities, low volatility, and non-flammability. One unfortunate drawback PFPAE causes severe metal corrosion and fluid degradation when used in oxidizing atmosphere. Reports of interest deal with synthesis of PFPAE-type liquids and development of additive to reduce oxidizing atmosphere degradation. Properties and molecular structures reported in detail. Also lubricant performance over range of conditions.
Paciorek, K.↗
The 1991 October 24 flare: A challenge for standard models
The M9.8 solar flare of 1991 October 24 22:30 UT presents several interesting characteristics: (1) energy release starts high in the corona; (2) the primary chromospheric ribbons are initially well separated and do not move apart at an observable rate; (3) no evidence is found for an erupting filament or other driver. To explain this flare, we consider several canonical flare models, including a filament eruption, a confined filament eruption, current interruption, and interacting loops. We conclude that none of these scenarios unequivocally explains this flare. Two possibilities which cannot be ruled out are (1) the eruption of a filament unobservable in H-alpha which starts high in the corona and produces no ribbon motions smaller than our detection threshold and no perceptible expansion of the coronal X-ray source, and (2) energy release due to spontaneous, propagating reconnection which allows the system to essentially brighten in place.
Beaujardiere, J.-F. De LA↗