Engineering topics

Martinson, Alex F.

Publications and source records attributed to Martinson, Alex F..

9 records

DOE OSTI2023

Understanding the unique optical and vibrational signatures of sequential infiltration synthesis derived indium oxyhydroxide clusters for CO 2 absorption

Sequential infiltration synthesis (SIS) is a vapor phase synthesis technique with potential to exert precise control over metal oxyhydroxide incorporation into polymer scaffolds. Here, we observe strong size-dependent properties of InO x (OH) y few-atom clusters deposited with variable SIS cycle numbers within a polymethylmethacrylate (PMMA) matrix. Infrared spectroscopy and ultraviolet-visible absorption spectroscopy reveal that the metal atom coordination and optical properties of the clusters depend on the number of SIS cycles performed as well as the choice of processing parameters. The incorporation of indium oxyhydroxide in PMMA via SIS presents an opportunity to improve the CO 2 absorption capacity and gas selectivity of inexpensive polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Site-Selective Atomic Layer Deposition at Thermally Generated Surface Oxygen Vacancies on Rutile TiO 2

Unique atomic arrangements (i.e., defects) on material surfaces may exhibit distinctive reactivity that affords opportunities for selective surface chemistry exclusively at those sites. While theoretically appealing, site-selective atomic layer deposition (ALD) processes remain largely unrealized experimentally. Here we provide evidence for site-selective ALD that exclusively targets oxygen vacancies thermally generated at the surface of TiO 2 single crystals. High-resolution in situ ellipsometry reveals the nucleation behavior of dimethylaluminum isopropoxide (DMAI) and water at process conditions precisely tuned for selective hydroxylation of surface defects. An island growth model for nucleation and atomic force microscopy (AFM) imaging are consistent with a site-selective growth mechanism that depends on the surface oxygen vacancy density. This approach to direct ALD reactions at defective surface sites may provide future opportunities for targeted remediation of electronically imperfect interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Structure–Transport Properties Governing the Interplay in Humidity-Dependent Mixed Ionic and Electronic Conduction of Conjugated Polyelectrolytes

Polymeric mixed ionic-electronic conductors (MIECs) are of broad interest in the field of energy storage and conversion, opto-electronics, and bioelectronics. A class of polymeric MIECs are conjugated polyelectrolytes (CPEs), which possess a p-conjugated backbone imparting electronic transport characteristics along with side chains comprised of a pendant ionic group to allow for ionic transport. Here, our study focuses on the humidity-dependent structure-transport properties of poly[3-(potassium-n-alkanoate) thiophene-2,5-diyl] (P3KnT) CPEs with varied side-chain lengths of n = 4, 5, 6, and 7. UV-Vis spectroscopy along with electronic paramagnetic resonance (EPR) spectroscopy reveal the infiltration of water leads to a hydrated, self-doped state that allows for electronic transport. The resulting humidity-dependent ionic conductivity (σ i ) of the thin films shows a monotonic increase with relative humidity (RH) while electronic conductivity (σ e ) follows a nonmonotonic profile. The values of σ e continue to rise with increasing RH reaching a local maximum after which σ e begins to decrease. P3KnTs with higher n values demonstrate greater resiliency to increasing RH before suffering decrease in σ e . This drop in σ e is attributed to two factors. First, disruption of the locally-ordered π-stacked domains observed through in situ humidity-dependent grazing incidence wide angle X-ray scattering (GIWAXS) experiments can account for some of the decrease in σ e . A second and more dominant factor is attributed to the swelling of the amorphous domains where electronic transport pathways connecting ordered domains are impeded. P3K7T is most resilient to swelling (based on ellipsometry and water uptake measurements) where sufficient hydration allows for high σ i (1.0 × 10 -1 S/cm at 95% RH) while not substantially disrupting σ e (1.7 × 10 -2 S/cm at 85% RH and 8.0 × 10 -3 S/cm at 95% RH). Overall, our study highlights the complexity of balancing electronic and ionic transport in hydrated CPEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Pyroelectric Heat Detection for Calibrated Measurement of Atomic Layer Deposition Reaction Heat

Atomic layer deposition (ALD) precursors and processes have been identified that enable the deposition of materials that span the periodic table. However, the detailed mechanisms, kinetics, thermodynamics, and complexities of even the most well-studied ALD half-reactions remain insufficiently resolved experimentally to test present computational hypotheses. In this work, a pyroelectric calorimeter is designed, implemented, calibrated, and electrically modeled to enable quantitative ALD reaction heat detection. The operation and response of three ALD calorimeter designs were evaluated for use as absolute ALD half-reaction heat detectors. The most effective design was calibrated in situ before being utilized to measure the heat generated by the reaction of trimethylaluminum with a hydroxylated alumina surface to produce 96 μJ/cm 2 over a reaction time of ~30 ms. With thermal and temporal resolutions down to 0.1 μJ/cm 2 and 50 ns, respectively, this sensitive and ultrafast probe is poised to improve our fundamental understanding of numerous ALD reaction mechanisms through quantitative comparison with first-principles computation predictions.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Thermal Atomic Layer Deposition of Gold: Mechanistic Insights, Nucleation, and Epitaxy

An in situ microbalance and infrared spectroscopic study of alternating exposures to Me2Au(S2CNEt2) and ozone illuminates the organometallic chemistry that allows for the thermal atomic layer deposition (ALD) of gold. In situ quartz crystal microbalance (QCM) studies resolve the nucleation delay and island growth of Au on a freshly prepared aluminum oxide surface with single cycle resolution, revealing inhibition for 40 cycles prior to slow nucleation and film coalescence that extends over 300 cycles. In situ infrared spectroscopy informed by first-principles computation provides insight into the surface chemistry of the self-limiting half-reactions, which are consistent with an oxidized Au surface mechanism. X-ray diffraction of ALD-grown gold on silicon, silica, sapphire, and mica reveals consistent out-of-plane oriented crystalline film growth as well as epitaxially directed in-plane orientation on closely lattice-matched mica at a relatively low growth temperature of 180 degrees C. A more complete understanding of ALD gold nucleation, surface chemistry, and epitaxy will inform the next generation of low-temperature, nanoscale, textured depositions that are applicable to high surface area supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Broadband Liquid Crystal Tunable Metasurfaces in the Visible: Liquid Crystal Inhomogeneities Across the Metasurface Parameter Space

Optical metasurfaces—planar nanostructured devices that can arbitrarily tailor the wavefront of light—may be reconfigured by changing their dielectric environment. The application of external stimuli to liquid crystals is a particularly promising means of tuning the optical properties of embedded metasurfaces because of liquid crystals' large and broadband optical anisotropy. However, the detailed behavior of liquid crystals immediately adjacent to the nanostructured meta-atoms elements is often overlooked, despite the optics of the device depending sensitively on this behavior (e.g., the spectral position of the meta-atom resonances). This is of increasing concern as the wavelength of operation further approaches the short-wavelength end of the visible spectrum and, therefore, the length scale of the inhomogeneities in the liquid crystal director field. In this manuscript, we undertake a fully comprehensive study, across the metasurface geometrical parameter space, of broadband (450-700 nm) all-dielectric liquid crystal tunable metasurfaces operating in the visible. Here, through combined experimental characterization, liquid crystal modeling, and optical simulations, we reveal and quantify the improved accuracy with which the optical properties of the liquid crystal tunable metasurfaces may be described, and identify the underlying physical mechanism: the three-dimensional spatial overlap of the liquid crystal director field and metasurface optical near fields in the vicinity of the meta-atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Isomerization and Selective Hydrogenation of Propyne: Screening of Metal–Organic Frameworks Modified by Atomic Layer Deposition

Various metal oxide clusters upward of 8 atoms (Cu, Cd, Co, Fe, Ga, Mn, Mo, Ni, Sn, W, Zn, In, and Al) were incorporated into the pores of the metal–organic framework (MOF) NU-1000 via atomic layer deposition (ALD) and tested via high-throughput screening for catalytic isomerization and selective hydrogenation of propyne. Cu and Co were found to be the most active for propyne hydrogenation to propylene, and synergistic bimetallic combinations of Co and Zn, along with standalone Zn and Cd, were established as the most active for conversion to the isomerized product, propadiene. The combination of Co and Zn in NU-1000 diminished the propensity for full hydrogenation to propane as well as coking compared to its individual components. Finally, this study highlights the potential for high-throughput screening to survey monometallic and bimetallic cluster combinations that best affect the efficient transformation of small molecules, while discerning mechanistic differences in isomerization and hydrogenation by different metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Defect Energetics in Pseudo-Cubic Mixed Halide Lead Perovskites from First-Principles

Owing to the increasing popularity of lead-based hybrid perovskites for photovoltaic (PV) applications, it is crucial to understand their defect energetics and its influence on their optoelectronic properties. In this work, we simulate various point defects in pseudocubic structures of mixed iodide-bromide and bromide-chloride methylammonium lead perovskites with the general formula MAPbI 3-y Br y or MAPbBr 3-y Cl y (where y is between 0 and 3), and use first-principles based density functional theory computations to study their relative formation energies and charge transition levels. We identify vacancy defects and Pb on MA antisite defect as the lowest energy native defects in each perovskite. Here, we observe that while the low energy defects in all MAPbI 3-y Br y systems only create shallow transition levels, the Br or Cl vacancy defects in the Cl-containing pervoskites have low energy and form deep levels which become deeper for higher Cl content. We examine the structures and density of states of pure and defect-containing perovskite systems to obtain an understanding of the nature of defect levels. Further, we study extrinsic substitution by different elements at the Pb site in MAPbBr 3 , MAPbCl 3 , and the 50-50 mixed halide perovskite, MAPbBr 1.5 Cl 1.5 , and identify some transition metals that create lower energy defects than the dominant intrinsic defects and also create midgap charge transition levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Water-Assisted Proton Transport in Confined Nanochannels

Hydrated excess protons under hydrophobic confinement are a critical component of charge transport behavior and reactivity in nanoporous materials and biomolecular systems. In this study, excess proton confinement effects are computationally investigated for sub-2 nm hydrophobic nanopores by varying the diameters (d = 0.81, 0.95, 1.09, 1.22, 1.36, 1.63, and 1.90 nm), lengths (l ~3 and ~5 nm), curvature, and chirality of cylindrical carbon nanotube (CNT) nanopores. CNTs with a combination of different diameter segments are also explored. The spatial distribution of water molecules under confinement is diameter-dependent; however, proton solvation and transport are consistently found to occur in the water layer adjacent to the pore wall, showing an “amphiphilic” character of the hydrated excess proton hydronium-like structure. The proton transport free energy barrier also decreases significantly as the nanopore diameter increases and proton transport becomes almost barrierless in the d > 1 nm nanopores. Among the nanopores studied, the Zundel cation (H 5 O 2 + ) is populated only in the d = 0.95 nm CNT (7,7) nanopore. The presence of the hydrated excess proton and K + inside the CNT (7,7) nanopore induces a water density increase by 40 and 20%, respectively. The K + transport through CNT nanopores is also consistently higher in the free energy barrier than proton transport. Interestingly, the evolution of excess protonic charge defect distribution reveals a “frozen” single water wire configuration in the d = 0.81 nm CNT (6,6) nanopore (or segment), through which hydrated excess protons can only shuttle via the Grotthuss mechanism. Vehicular diffusion becomes relevant to proton transport in the “flat” free energy regions and in the wider nanopores, where protons do not primarily shuttle in the axial direction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗