Engineering Papers⌕ Search

Engineering topics

Martin, D. J.

Publications and source records attributed to Martin, D. J..

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Slow crack growth measurement using an electrical grid

Photolithography was used to produce a resistance grid on the surface of a DCB fracture specimen. The grid line spacings were 10 microns over a distance of 2 cm. Slow crack growth was measured on soda-lime-silica glass. At low values of K(I) (0.3 to 0.4 MPa.sq r + m, increased. Equations are given for the design of grids. The grid technique could be used to measure very slow crack growth at high temperature with appropriate compatible metal-ceramic materials.

Martin, D. J.↗
NASA NTRS1973

Coordinated adaptive filters for motion simulators.

A new approach to providing motion drive signals to a flight simulator utilizing coordinated adaptive filters is presented. Some motivation for the use of coordinated washout is discussed, along with conditions that determine the burden of coordination. The coordinated adaptive filters are derived, based on continuous steepest descent, and the application of the filters to simulated flight data is demonstrated.

Parrish, R. V.↗
NASA NTRS1958

Experimental and Analytical Investigation of the Transonic and Supersonic Divergence Characteristics of a Delta-Plan-Form All- Movable Control

The static aeroelastic divergence characteristics of a delta-planform model of the canard control surface of a proposed air-to-ground missile have been studied both analytically and experimentally in the Mach number range from 0.6 to 3.0. The experiments indicated that divergence occurred at a nearly constant value of dynamic pressure at Mach numbers up to 1.2. At higher Mach numbers somewhat higher values of dynamic pressure were required to produce divergence. The analysis and the experiment indicate that the camber stiffness of the control surface and the stiffness of the control actuator are both important in divergence of surfaces of this type.

PLANFORM↗