Engineering PapersSearch

Engineering topics

Marshall, W. M.

Publications and source records attributed to Marshall, W. M..

2018 NASA Green Propulsion Technology Development Roadmap

The NASA Green Propulsion Working Group (GPWG) was tasked by the NASA Chemical Propulsion Subcapabilities Management (CPSM) with the development of this NASA Green Propulsion Technologies Development Roadmap, herein referred to as the Green Propulsion Roadmap, or simply the Roadmap, to provide guidance to NASA through the CPSM on green propulsion technology development. Other agencies or commercial partners may refer to this roadmap as well. It is envisioned that the synthesis of various Center-based activities and knowledge repositories will result in a cumulative knowledge gain, and will provide capabilities beyond the sum contribution of individual Centers. Ultimately, a well-defined roadmap of technology investment path, the enhanced coordination and alignment of activities among NASA Centers and other Federal Agencies, and a well-supported green propulsion community will facilitate the path towards the broader infusion of green propulsion technologies for science and human exploration missions, as well as a deeper understanding of the fundamental behaviors and characteristics of these systems that is on par with other historically used monopropellant propulsion systems, such as hydrazine.

Cavender, D. P.

Sea-Level Static Testing of the Penn State Two-Dimensional Rocket-Based Combined Cycle (RBCC) Testbed

Twin thruster tests have been conducted with the Penn State RBCC test article operating at sea- level static conditions. Significant differences were observed in the performance characteristics for two different thruster centerline spacings. Changing the thruster spacing from 2.50 to 1.75 in. reduced the entrained air velocity (-17%) and the thrust (-7%) for tests at a thruster chamber pressure of 200 psia and MR = 8. In addition, significant differences were seen in the static pressure profiles, the Raman spectroscopy profiles, and the acoustic power spectrum for these two configurations.

Cramer, J. M.

Sea-Level Static Testing of the Penn State Two-Dimensional Rocket-Based Combined Cycle (RBCC) Testbed

The present results indicated that: 1.Significant RBCC ejector mode database has been generated for single and twin thruster configuration and for global and local measurements. 2. Ongoing analysis and correlation effort for MSFC CFD modeling and turbulent shear layer analysis was completed. 3. The potential follow-on activities are: detailed measurements of air flow static pressure and velocity profiles; investigation other thruster spacing configurations; performing fundamental shear layer mixing study; and demonstrating single-shot Raman measurements.

Cramer, J. M.

Recent Experimental Results Related to Ejector Mode Studies of Rocket-Based Combined Cycle (RBCC) Engines

Contents include the folloving: 1. Motivation. Support NASA's 3d generation launch vehicle technology program. RBCC is promising candidate for 3d generation propulsion system. 2. Approach. Focus on ejector mode p3erformance (Mach 0-3). Perform testing on established flowpath geometry. Use conventional propulsion measurement techniques. Use advanced optical diagnostic techniques to measure local combustion gas properties. 3. Objectives. Gain physical understanding of detailing mixing and combustion phenomena. Establish an experimental data set for CFD code development and validation.

Cramer, J. M.