Engineering topics

Marshall, J. R.

Publications and source records attributed to Marshall, J. R..

At least 37 records · Page 2

NASA NTRS1994

Exobiology experiments for Earth-orbital platforms

Low-gravity (microgravity) studies relevant to prebiotic evolution and the history of the biogenic elements (C, H, N, O, P, S) are particularly suited to orbital platforms. Relevant to these topics are phenomena such as gas-particle interactions (e.g., formation of organic aerosols via photolytic reactions) including nucleation, condensation, evaporation, adsorption, and catalytic reactions on surfaces; and, small-particle or grain interactions (e.g., growth of interstellar dust particles and planetesimals) including processes such as aggregation (or coagulation), scavenging, and collisions. Both gas-particle and grain (i.e., dust, crystals, organic aerosols, etc.) interactions studies can benefit from microgravity and are pertinent to studies in the areas of chemical evolution in the solar nebula, the interstellar medium, and planetary atmospheres; growth of planetesimals; and prebiotic evolution. In general, the microgravity environment allows for long duration and controlled simulations of processes occurring in exobiologically significant systems such as Titan's atmosphere, interstellar dust clouds, and the solar nebula in which gas-particle or particle-particle interactions play a significant role.

Huntington, J. L.↗

NASA NTRS1993

An Integrated XRF/XRD Instrument for Mars Exobiology and Geology Experiments

By employing an integrated x-ray instrument on a future Mars mission, data obtained will greatly augment those returned by Viking; details characterizing the past and present environment on Mars and those relevant to the possibility of the origin and evolution of life will be acquired. A combined x-ray fluorescence/x-ray diffraction (XRF/XRD) instrument was breadboarded and demonstrated to accommodate important exobiology and geology experiment objectives outlined for MESUR and future Mars missions. Among others, primary objectives for the exploration of Mars include the intense study of local areas on Mars to establish the chemical, mineralogical, and petrological character of different components of the surface material; to determine the distribution, abundance, and sources and sinks of volatile materials, including an assessment of the biologic potential, now and during past epoches; and to establish the global chemical and physical characteristics of the Martian surface. The XRF/XRD breadboard instrument identifies and quantifies soil surface elemental, mineralogical, and petrological characteristics and acquires data necessary to address questions on volatile abundance and distribution. Additionally, the breadboard is able to characterize the biogenic element constituents of soil samples providing information on the biologic potential of the Mars environment. Preliminary breadboard experiments confirmed the fundamental instrument design approach and measurement performance.

Koppel, L. N.↗

NASA NTRS1991

Exobiological implications of dust aggregation in planetary atmospheres: An experiment for the gas-grain simulation facility

The Gas-Grain Simulation Facility (GGSF) will provide a microgravity environment where undesirable environmental effects are reduced, and thus, experiments involving interactions between small particles and grains can be more suitably performed. Slated for flight aboard the Shuttle in 1992, the ESA glovebox will serve as a scientific and technological testbed for GGSF exobiology experiments as well as generating some basic scientific data. Initial glovebox experiments will test a method of generating a stable, mono-dispersed cloud of fine particles using a vibrating sprinkler system. In the absence of gravity and atmospheric turbulence, it will be possible to determine the influence of interparticle forces in controlling the rate and mode of aggregation. The experimental chamber can be purged of suspended matter to enable multiple repetitions of the experiments. Of particular interest will be the number of particles per unit volume of the chamber, because it is suspected that aggregation will occur extremely rapidly if the number exceeds a critical value. All aggregation events will be recorded on high-resolution video film. Changes in the experimental procedure as a result of surprise events will be accompanied by real-time interaction with the mission specialist during the Shuttle flight.

Huntington, J. L.↗

NASA NTRS1991

The potential scale of aeolian structures on Venus

Simulations of the Venusian aeolian environment with the Venus Wind Tunnel have shown that microdunes are formed during the entrainment of sand-sized material. These structures are several tens of centimeters long (2-3 cm high) and combine the morphological and behavioral characteristics of both full-scale terrestrial dunes and current ripples formed in subaqueous environments. Their similarity to both reflects the fact that the Venusian atmosphere has a density intermediate between air and water. Although the development of microdunes in the wind tunnel experiments was limited by tunnel dimensions, it is possible to make some predictions about their potential size on Venus, and the potential size of related aeolian structures. Microdunes are fluid-filled structures (as are dunes and current ripples) and as such have no theoretical upper limit to their size from a fluid dynamics viewpoint. Limitations to size observed in subaqueous structures are set by, for example, water depth; limitations to the size of dunes are set by, for example, sand supply. It is therefore reasonable to suppose that the microdunes on Venus could evolve into much larger features than those observed in experiments. In addition, the researchers note that current ripples (which are closely related to microdunes) are often found in association with giant ripples that have dimensions similar to aeolian dunes. Thus, it may be reasonable to assume that analogous large scale structures occur on Venus. Both (terrestrial) aeolian and subaqueous environments generate structures in excess of one hundred meters in wavelength. Such dimensions may therefore be applicable to Venusian bedforms. Analysis of Magellan data may resolve the issue.

Marshall, J. R.↗

NASA NTRS1990

Exobiology on Mars

Descriptions of several instrument concepts that were generated during a workshop entitled, Exobiology Instrument Concepts for a Soviet Mars 94/94 Mission, held at NASA Ames Research Center in 1989 are presented. The objective was to define and describe instrument concepts for exobiology and related science that would be compatible with the mission types under discussion for the 1994 and 1996 Soviet Mars missions. Experiments that use existing technology were emphasized. The concepts discussed could also be used on U.S. missions that follow Mars Observer.

Devincenzi, D. L.↗

NASA NTRS1987

Wind ripples in low density atmospheres

The effect of varying fluid density (rho) on particle transport was examined by conducting tests at atmospheric pressures between 1 and 0.004 bar in the Martian Surface Wind Tunnel (MARSWIT). This study specifically concerns the effect of varying rho on the character of wind ripples, and elicits information concerning generalized ripple models as well as specific geological circumstances for ripple formation such as those prevailing on Mars. Tests were conducted primarily with 95 micron quartz sand, and for each atmospheric pressure chosen, tests were conducted at two freestream wind speeds: 1.1 U*(t) and 1.5 U*(t), where U*(t) is saltation threshold. Preliminary analysis of the data suggests: (1) ballistic ripple wavelength is not at variance with model predictions; (2) an atmospheric pressure of approximately 0.2 bar could represent a discontinuity in ripple behavior; and (4) ripple formation on Mars may not be readily predicted by extrapolation of terrestrial observations.

Miller, J. S.↗

NASA NTRS1987

Aeolian abrasion on Venus: Preliminary results from the Venus simulator

The role of atmospheric pressure on aeolian abrasion was examined in the Venus Simulator with a constant temperature of 737 K. Both the rock target and the impactor were fine-grained basalt. The impactor was a 3 mm diameter angular particle chosen to represent a size of material that is entrainable by the dense Venusian atmosphere and potentially abrasive by virtue of its mass. It was projected at the target 10 to the 5 power times at a velocity of 0.7 m/s. The impactor showed a weight loss of approximately 1.2 x 10 to the -9 power gm per impact with the attrition occurring only at the edges. Results from scanning electron microscope analysis, profilometry, and weight measurement are summarized. It is concluded that particles can incur abrasion at Venusian temperatures even with low impact velocities expected for Venus.

Marshall, J. R.↗

NASA NTRS1986

Design and calibration of the carousel wind tunnel

In the study of planetary aeolian processes the effect of gravity is not readily modeled. Gravity appears in the equations of particle motion along with interparticle forces but the two terms are not separable. A wind tunnel that would permit variable gravity would allow separation of the forces and aid greatly in understanding planetary aeolian processes. The design Carousel Wind Tunnel (CWT) allows for a long flow distance in a small sized tunnel since the test section is a continuo us circuit and allows for a variable pseudo gravity. A prototype design was built and calibrated to gain some understanding of the characteristics of the design and the results presented.

Leach, R. N.↗

NASA NTRS1986

Electrostatic aggregation of finely-comminuted geological materials

Electrostatic forces are known to have a significant effect on the behavior of finely comminuted particulate material: perhaps the most prevalent expression of this being electrostatic aggregation of particles into relatively coherent clumps. However, the precise role of electrostatic attraction and repulsion in determining the behavior of geological materials (such as volcanic ash and aeolian dust) is poorly understood. Electrostatic aggregation of fine particles is difficult to study on Earth either in the geological or laboratory environment principally because the material in an aggregated state remains airborne for such a short period of time. Experiments conducted in the NASA/JCS - KC135 aircraft are discussed. The aircraft experiments are seen as precursors to more elaborate and scientifically more comprehensive Shuttle or Space Station activities.

Marshall, J. R.↗

NASA NTRS1985

Potential Bedforms on Venus: Wind Tunnel Simulations

Wind tunnel studies involving mixtures of particle sizes (bimodal and multimodal distributions) indicate the microdunes and related ridge- and wave-like structures can occur over a wider range of conditions. The results indicate that the bedforms develop as a consequence of the effective sorting capability of the high-density Venusian atmosphere. Four mixtures of different particle-size distributions were investigated. The results of these experiments suggest that: (1) small-scale bedforms on Venus may be more common than previously anticipated from simulations involving only unimodal sands; (2) small particles are rapidly sorted on Venus if winds slightly above threshold are available; (3) coarse particles are transported in traction within the bedforms as well as rolled by saltating fines, suggesting that the capacity of wind on Venus to transport material is greater than anticipated from previous flux studies and (4) microdunes and related ridges and waves with coarse and fine layers can be produced during sorting.

Bougan, S. J.↗

NASA NTRS1985

Microdunes and Other Aeolian Bedforms on Venus: Wind Tunnel Simulations

The development of aeolian bedforms in the simulated Venusian environment has been experimentally studied in the Venus Wind tunnel. It is found that the development of specific bedforms, including ripples, dunes, and waves, as well as their geometry, are controlled by a combination of factors including particle size, wind speed, and atmospheric density. Microdunes are formed which are analogous to full-size terrestrial dunes and are characterized by the development of slip faces, internal cross-bedding, a low ratio of saltation path length to dune length, and a lack of particle-size sorting. They begin to develop at wind speeds just above saltation threshold and evolve into waves at higher velocities. At wind speeds of about 1.5 m/sec and higher, the bed is flat and featureless. This evolution is explained by a model based on the interaction of alternating zones of erosion and deposition and particle saltation distances.

Greeley, R.↗

NASA NTRS1985

Transport of Venusian rolling 'stones' by wind?

Simulations of Venusian wind processes are described which show that particles are moved by 'rolling' at wind speeds as much as 30 percent lower than those required for saltation threshold. This mode of wind transport is only observed for sustained periods in water on earth; thus, there are similarities between aqueous fluid transport on earth and atmospheric transport on Venus. The formation of small sand ridges and grooves oriented parallel to the wind direction is associated with the rolling of grains in Venusian simulations and these structures may be unique aeolian features on Venus.

Greeley, R.↗

NASA NTRS1984

Microdunes and other aeolian bedforms on Venus - Wind Tunnel simulations

The development of aeolian bedforms in the simulated Venusian environment has been experimentally studied in the Venus Wind Tunnel. It is found that the development of specific bedforms, including ripples, dunes, and 'waves', as well as their geometry, are controlled by a combination of factors including particle size, wind speed, and atmospheric density. Microdunes are formed which are analogous to full-size terrestrial dunes and are characterized by the development of slip faces, internal cross-bedding, a low ratio of saltation path length to dune length, and a lack of particle-size sorting. They begin to develop at wind speeds just above saltation threshold and evolve into waves at higher velocities. At wind speeds of about 1.5 m/sec and higher, the bed is flat and featureless. This evolution is explained by a model based on the interaction of alternating zones of erosion and deposition and particle saltation distances.

Greeley, R.↗

NASA NTRS1984

Wind abrasion on Venus: A means for experimental investigations

A study to determine the feasibility of conducting experiments to simulate the aeolian environment on Venus as related to wind abrasion was completed. Ideally, such experiments should involve complete investigation of weathering, in which mechanical, thermal, and chemical parameters are taken into account. This is particularly important for Venus, where atmospheric temperatures and pressures at the surface produce an environment which is equivalent to low or medium grade metamorphic conditions on Earth. Details that describe the Venus Aeolian Abrasion Device (VAAD) are included. The VAAD device would enable experiments to be conducted with the same chemistry, temperature, pressure, and other physical properties of the Venus atmosphere near the surface. The proposed device enables the important aeolian parameters to be controlled and monitored, including particle size, velocity, impact-angle and flux, atmospheric pressure, temperature, and gas composition.

Greeley, R.↗

NASA NTRS1984

Abrasion by aeolian particles: Earth and Mars

Estimation of the rate of aeolian abrasion of rocks on Mars requires knowledge of: (1) particle flux, (2) susceptibilities to abrasion of various rocks, and (3) wind frequencies on Mars. Fluxes and susceptibilities for a wide range of conditions were obtained in the laboratory and combined with wind data from the Viking meteorology experiment. Assuming an abundant supply of sand-sized particles, estimated rates range up to 2.1 x 10 to the minus 2 power cm of abrasion per year in the vicinity of Viking Lander 1. This rate is orders of magnitude too great to be in agreement with the inferred age of the surface based on models of impact crater flux. The discrepancy in the estimated rate of abrasion and the presumed old age of the surface cannot be explained easily by changes in climate or exhumation of ancient surfaces. The primary reason is thought to be related to the agents of abrasion. At least some sand-sized (approx. 100 micrometers) grains appear to be present, as inferred from both lander and orbiter observations. High rates of abrasion occur for all experimental cases involving sands of quartz, basalt, or ash. However, previous studies have shown that sand is quickly comminuted to silt- and clay-sized grains in the martian aeolian regime. Experiments also show that these fine grains are electrostatically charged and bond together as sand-sized aggregates. Laboratory simulations of wind abrasion involving aggregates show that at impact velocities capable of destroying sand, aggregates from a protective veneer on the target surface and can give rise to extremely low abrasion rates.

Greeley, R.↗

NASA NTRS1982

Origin of desert loess from some experimental observations

The aeolian attrition of angular quartz grains previously produced by weathering in deserts has been simulated, yielding abrasion products which show that both coarse and fine silt sizes are produced by this process. These results suggest that desert aeolian processes can produce loess, and it is speculated that while much of this material from many deserts has been deposited in the sea, the Chinese loess could have been produced in the Gobi desert. The finest of the particles produced by such attrition may serve as a source of silica for silcrete formation.

Whalley, W. B.↗

NASA NTRS1982

Rate of wind abrasion on Mars

A brief description is given of the experiments performed to obtain data on windblown particles and abrasion of rocks in a simulated Martian environment. Preliminary results are presented and combined with Viking meteorological data in estimating rates of wind abrasion at the VL-1 site on Mars. Attention is also given to the implications that the results have for Martian surface history. Calculations of the present rates of abrasion by windblown particles on Mars yield values ranging from 0.021 cm/yr to nearly zero, depending on the target, the agent of abrasion, and the availability of windblown particles.

Greeley, R.↗

NASA NTRS1974

Vortex age as a wake turbulence scaling parameter

Tests were conducted in the Virginia Tech Stability Wind Tunnel to determine the significance of vortex age as a scaling parameter in wake turbulence development and dissipation. Vortex structure was measured over a range of three angles of attack, three free-stream speeds, and seven downstream positions from 2 to 30 chordlengths using an NACA 0012 wing and a five hole yawhead probe. The resulting data indicates that vortex age is not a self-sufficient scaling parameter but a free-stream velocity influence also exists at higher angles of attack which cannot be explained in terms of Re or M.

Marchman, J. F., III↗