Engineering topics

Marschilok, Amy C. [Stony Brook Univ., NY (United States); Brookhaven National Laboratory (BNL), Upton, NY (United States)] (ORCID:0000000191740474)

Publications and source records attributed to Marschilok, Amy C. [Stony Brook Univ., NY (United States); Brookhaven National Laboratory (BNL), Upton, NY (United States)] (ORCID:0000000191740474).

8 records

All sources NASA NTRS DOE OSTI

DOE OSTI2026

The Influence of Mesoscale Particle Structure on the Electrode Degradation and Resultant Electrochemistry of Lithium Ion Cells With Nickel Rich Lithium Nickel Manganese Cobalt Oxide Positive Electrodes

Nickel-rich lithium nickel manganese cobalt oxide, NMC (LiNi x Mn y Co z O 2 ), materials are desirable positive electrodes in lithium ion batteries, providing high capacity and energy density. The mesoscale structure of NMC materials is commonly a polycrystalline aggregate, providing opportunity for short lithium ion transport distance of the small primary particles, yet facile material handling due to the larger secondary particles. On (de)lithiation the NMC unit cell changes volume, where the anisotropic strain can result in secondary particle fracture. This secondary particle fracture process during cycling has been associated with several degradation modes of NMC materials in LIBs. In this work, a milling process was determined whereby the secondary particles could be pre-fractured with retention of the parent primary particle crystallographic structure, crystallite size, and morphology, providing the ability to unambiguously determine the influence of NMC secondary particle size and mesostructure on resultant functional behavior. The bulk and interfacial properties and electrochemistry of as-received commercially obtained polycrystal NMC811 (LiNi 0.8 Mn 0.1 Co 0.1 O 2 , PC NMC) and its milled MPC NMC counterpart were compared. The smaller secondary particle size, higher surface area MPC NMC was found to result in 1) greater cathode tortuosity, 2) reduced surface Ni on the cycled MPC cathodes consistent with surface reconstruction, and 3) increased Ni deposition on the anodes from cathode-anode crosstalk. These factors manifested in unfavorable electrochemical behavior of MPC with lower functional capacity at both 1C and C/10 rates and higher impedance over extended moderate voltage (dis)charge cycling.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Reaction Mechanism of Electrodeposited ε-MnO 2 : A Proton-Centered Pathway in Aqueous Zn-Ion Systems

Aqueous Zn/MnO 2 batteries have garnered significant interests owing to their abundance, high theoretical specific capacity, safety, and low cost. However, large-scale application of these systems is limited by the incomplete understanding of the MnO 2 reaction chemistry. The different crystal lattice structures among MnO 2 polymorphs contribute to the variations in reported reaction mechanisms. Among them, ε-MnO 2 polymorph, the dominant phase in electrolytic manganese dioxide (EMD), is notably observed during the charge cycles of aqueous Zn/MnO 2 batteries. Here, in this work, we investigate the electrochemical behavior of an ε-MnO 2 cathode synthesized via electrodeposition from a ZnSO 4 and MnSO 4 electrolyte, onto a 3-dimensional carbon cloth substrate. Proton intercalation emerges as the dominant charge storage mechanism, critically enabling the reversibility of ε-MnO 2 during cycling, as revealed by operando synchrotron X-ray diffraction and X-ray absorption spectroscopy. Additionally, a proton-coupled dissolution/redeposition pathway operates alongside minor Zn 2+ intercalation, as quantified by Rietveld refinement. Morphological and chemical heterogeneities are studied by transmission X-ray microscopy further validates this reaction mechanism. These mechanistic insights provide the foundation for rationally designing Zn/MnO 2 batteries with optimized proton dynamics and charge transfer, advancing these systems as a viable solution for safe, cost-effective grid-scale energy storage.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Deciphering the Solvation Structure of Aqueous ZnCl 2 Solutions from X-ray Absorption Spectra Using the Interpretable Graph Neural Network

Machine learning (ML) provides powerful pathways for predicting spectroscopic observables from atomic structures, but its broader impact depends on making model predictions interpretable in terms of physical and chemical principles. Here, we introduce a physics-guided graph neural network (GNN) model that predicts Zn K-edge X-ray spectroscopy (XAS) spectra of aqueous ZnCl 2 solutions. Training data are generated from ab initio XAS calculations on molecular dynamics snapshots obtained using a machine learning interatomic potential. The GNN reproduces experimental spectra across concentrations from dilute (<0.1 m) to highly concentrated (30 m, “water-in-salt”) regimes and scales efficiently to large, disordered liquid systems beyond the reach of conventional ab initio approaches. Gradient-based attribution analysis reveals that the model learns physically meaningful structure-spectrum relationships. Ligand-specific attributions reflect orbital hybridization patterns and the origin of the excitations derived from the density functional theory. Bond-length attributions recover spectral shifts consistent with multiple-scattering theory. Finally, this work bridges data-driven prediction with electronic-structure theory, establishing a general paradigm for interpretable ML that links atomic structure, electronic structure, and spectroscopic observables.

25 ENERGY STORAGE↗

DOE OSTI2025

Tuning effect of vanadium substitution on the structural and electronic properties of potassium hollandite surfaces

Metal oxide surfaces possess unique properties that are crucial for a wide variety of applications. Herein, density functional theory calculations are performed to study surfaces of potassium hollandite, KMn 8 O 16 , a promising cathode material for electrochemical energy storage, and the vanadium-substituted analog KMn 7 VO 16 . The results show that there is a clear increase in the stability of KMn 8 O 16 with (001) < (110) < (100) or (010), apt to adopt an elongated rod-like morphology. The vanadium (V)-substitution lowers the crystal symmetry and prefers to occupy the surface sites, resulting in electron redistribution and selective tuning of surface energy depending on the surface structures. In particular, the higher stability of substituted V 4+ compared with Mn 4+ ions leads to stabilization of the (001) surface due to the direct interaction of reduced Mn δ+ ions on the surface, while such tuning effect decreases with the increase in surface stability, (110) > (100) and (010). As a result, the KMnO 16 rod is shortened upon V-substitution as observed experimentally, effectively facilitating the ion transport during discharge. The V substituents also introduce stabilization to the defect surfaces resulting from Mn 2+ dissolution during cycling, thereby hindering further structural decay. In conclusion, our study demonstrates the potential tuning effect of V-substitution to promote the ion transport and mitigate the capacity degradation of α-MnO 2 -based materials.

25 ENERGY STORAGE↗

DOE OSTI2025

Understanding Electrochemical Sulfur-Based Phase Evolution via Complementary Insight from Operando Spatially Resolved X-ray Diffraction and X-ray Absorption Spectroscopy

Lithium/sulfur batteries are emerging as promising candidates for use in large-scale energy storage, but practical challenges, including insufficient power density and polysulfide shuttling, remain. Here, this work presents the first use of operando energy dispersive X-ray diffraction (EDXRD) to monitor Li/S electrochemistry within a liquid electrolyte. Complementary operando synchrotron-based EDXRD, X-ray absorption spectroscopy (XAS), X-ray powder diffraction (XPD), and ex situ laboratory Raman analysis provide evidence for α-S 8 conversion upon discharge into Li 2 S x polysulfide phases and conversion into β-S 8 during charge. Understanding the underlying mechanisms of sulfur reduction and oxidation within thick electrodes will enable advances in next-generation Li/S batteries and material design.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Polyethylene Glycol Surface Modification and Polythiophene Side-Chain Chemistry: A Combined Strategy toward High-Capacity Lithium-Ion Battery Anodes

In the development of high-capacity lithium-ion batteries (LIBs), the combined optimization of active material interfaces and polymer binder chemistry plays a critical role in improving electrode performance and longevity. This work explores a dual design strategy incorporating polyethylene glycol (PEG) surface modification and carboxylated polythiophene side-chain tailoring to enhance the electrochemical behavior of magnetite (Fe 3 O 4 )-based anodes. PEG is employed to improve interfacial stability, while carboxylated polythiophene binders with varying alkyl side-chain lengths─poly[3-(potassium-4-butanoate)thiophene-2,5-diyl] (P3KBT), poly[3-(potassium-5-pentanoate)thiophene-2,5-diyl] (P3KPT), and poly[3-(potassium-6-hexanoate)thiophene-2,5-diyl] (P3KHT)─are used to modulate molecular interactions and ion transport. Among these three analogs, the PEG–Fe 3 O 4 –P3KHT electrode exhibits superior ion-transfer kinetics, the highest capacity retention, and the lowest charge-transfer resistance after extended cycling. Compared to their non-PEG analogs, PEG-coated electrodes demonstrate enhanced structural integrity and electrochemical behavior, emphasizing the synergistic effects of surface modification and side-chain chemistry. These findings highlight the importance of interfacial interactions and molecular design in achieving robust and high-performance composite anodes for next-generation LIBs.

Fe3O4↗

DOE OSTI2025

Understanding the Benefit of Hybrid Electrolytes towards Vanadium Dissolution Suppression and Improved Capacity Retention in Zinc‐Aqueous Batteries Using NaV 3 O 8 Cathodes

Vanadate cathodes used in aqueous Zn-ion batteries with ZnSO 4 are hindered by capacity loss from V dissolution into the electrolyte. However, studies pinpointing the onset of dissolution as a function of electrochemical redox state and quantifying the amount of associated active material are lacking. To prevent dissolution of the NaV 3 O 8 active material, Na + ions are introduced into the electrolyte. Specifically, a hybrid ZnSO 4 + Na 2 SO 4 electrolyte is investigated in concert with NaV 3 O 8 (NVO) cathodes of varied crystallinity to determine the resulting impacts on cathode dissolution and functional electrochemistry. The use of Na + -containing hybrid electrolyte shows no significant change in Zn 2+ diffusion coefficients yet improved capacity retention. Time-resolved quantitative optical emission spectroscopy demonstrates the suppression of V dissolution with the hybrid electrolyte in both pristine and cycled electrodes. Operando synchrotron X-ray diffraction and absorption provide mechanistic insights. Hydrated NVO with wider interplanar spacing exhibits much higher H + /Zn 2+ capacity, while the Na 2 SO 4 mitigates the formation of irreversible side products. Furthermore, this study demonstrates that the use of hybrid electrolytes and control of crystallite size in the parent material can significantly improve electrochemical behavior of layered V-based cathodes in Zn-ion batteries, providing a general strategy toward safe and resilient aqueous battery systems.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Deciphering the Evolution of Current Distribution in Hybrid Silver Vanadium Oxide / Carbon Monofluoride Cathodes within Lithium Primary Batteries

For batteries to function effectively all active material must be accessible requiring both electron and ion transport to each particle. A common approach to generating the needed conductive network is the addition of carbon to create a composite electrode. An alternative approach is the electrochemically induced formation of conductive reaction products where the electrochemically generated materials are in intimate contact with the active material contributing to effective connection of each active particle. Furthermore, this study probes silver vanadium oxide (Ag 2 V 4 O 11 , SVO), carbon monofluoride (CF x ), and hybrid SVO/CF x electrodes in lithium batteries. Ex situ XRD identifies Ag 0 as a reduction product from SVO and LiF from CF x that can be followed as a function of depth-of-discharge (DOD). Spatially-resolved operando energy dispersive x-ray diffraction reveals that the presence of SVO alleviates reaction heterogeneity in the electrodes which are electron transfer limited in the absence of sufficient Ag 0 . Synchrotron X-ray tomography on discharged cathodes reveals the distribution of silver particles where the particles are more closely spaced near the current collector indicating multiple nucleation sites for their formation. Finally, operando isothermal microcalorimetry is used to determine the heat dissipation of the parent and hybrid battery types. Using material enthalpy potentials, we determine the current distribution between the two active materials for the discharging hybrid cathode adding further insight to the diffraction analysis. Taken together, these results provide a comprehensive understanding of hybrid SVO/CF x cathodes and give guidance on optimal compositions that balance power and energy density considerations.

36 MATERIALS SCIENCE↗