Engineering topics

Majumdar, Ashabari

Publications and source records attributed to Majumdar, Ashabari.

5 records

DOE OSTI2023

UO 2 target preparation with spin coating assisted solution combustion synthesis

A simple and efficient target preparation method is developed combining spin coating and solution combustion synthesis. Multiple smooth and uniform UO 2 targets have been prepared using this method on a variety of backings (aluminium, carbon, silicon) used in nuclear physics experiments. The thicknesses of the targets can be precisely tuned by changing the number of coatings within the range of ~50-1000 µm/cm 2 . These targets are highly uniform (<5% deviation), robust, and remain strongly adherent to their backings even after being irradiated by high doses (10 17 ions/ cm 2 ) of 1.7 MeV Ar 2+ ions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Neutron capture of UO 2 targets prepared by spin-coating assisted combustion synthesis

Two uranium dioxide (UO 2 ) targets of (414 ± 23) nm and (1092 ± 93) nm thicknesses were prepared on 6061 aluminum alloy and puratronic grade aluminum backing materials. The targets were deposited with a novel method combining spin coating and solution combustion synthesis (SCS). The target layers consisted of small (3–7 nm) UO 2 grains and uniformly distributed ultra-small (1–3 nm) pores. The prepared targets were tested at the Los Alamos National Laboratory’s LANSCE facility for neutron irradiation damage and suitability for neutron capture experiments. The samples showed no signs of target material loss after the irradiation. However, irradiation caused a significant increase in the grain size (4–10 nm), as well as upward mass diffusion and coalescence of the pores due to the thermal spikes. The magnesium in the aluminum 6061 alloy backing also diffused into the UO 2 layer during neutron irradiation. The structural changes in the target after the irradiation do not affect the data from neutron capture. As a result, the new method can be used more broadly to prepare other actinide targets for nuclear physics experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2022

Irradiation-induced amorphization of UO 2 films prepared by spraying-assisted combustion synthesis

Spraying-assisted combustion synthesis with uranyl nitrate – acetylacetone – 2-methoxyethanol solutions was used to prepare UO 2 films on an aluminum alloy substrate. The tuning of the spraying parameters and annealing temperatures allowed the preparation of UO 2 films with thicknesses varying from 10–300 nm and 5–10 nm UO 2 grain size. High-resolution electron microscopy and X-ray photoelectron spectroscopy showed that increasing the annealing temperature promotes Mg diffusion from the substrate into the films. The incorporation of Mg reduced the overall crystallinity of the films. The irradiation with Ar 2+ ions (1.7 MeV energy and a fluence of 2 × 10 16 ions/cm 2 ) did not degrade the quality of the films. However, the Mg content significantly influenced the irradiation-induced restructuring of the UO 2 films. Irradiated films with low or no Mg content exhibit high crystallinity, and the UO 2 /Al interfacial layer becomes highly porous. Films with higher Mg content are mostly amorphized after irradiation. The origin of irradiation-induced amorphization was related to the formation of Mg y U 1-y O 2±x solid solutions. Chemically complex, pore-free, and amorphous Mg-Al-O film/substrate interfacial layers enable continuous Mg diffusion during irradiation. As a result, the gradual increase in Mg amounts triggers irradiation-induced precipitation of a crystalline MgO-rich phase within the amorphous films.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2021

Hyperstoichiometric Uranium Dioxides: Rapid Synthesis and Irradiation-Induced Structural Changes

Uranium dioxide (UO 2 ), the primary fuel for commercial nuclear reactors, incorporates excess oxygen forming a series of hyperstoichiometric oxides. Thin layers of these oxides, such as UO 2.12 , form readily on the fuel surface and influence its properties, performance, and potentially geologic disposal. This work reports a rapid and straightforward combustion process in uranyl nitrate–glycine–water solutions to prepare UO 2.12 nanomaterials and thin films. We also report on the investigation of the structural changes induced in the material by irradiation. Despite the simple processing aspects, the combustion synthesis of UO 2.12 has a sophisticated chemical mechanism involving several exothermic steps. Raman spectroscopy and single-crystal X-ray diffraction (XRD) measurements reveal the formation of a complex compound containing the uranyl moiety, glycine, H 2 O, and NO 3 – groups in reactive solutions and dried combustion precursors. Combustion diagnostic methods, gas-phase mass spectroscopy, differential scanning calorimetry (DSC), and extracted activation energies from DSC measurements show that the rate-limiting step of the process is the reaction of ammonia with nitrogen oxides formed from the decomposition of glycine and uranyl nitrate, respectively. However, the exothermic decomposition of the complex compound determines the maximum temperature of the process. In situ transmission electron microscopy (TEM) imaging and electron diffraction measurements show that the decomposition of the complex compound directly produces UO 2 . The incorporation of oxygen at the cooling stage of the combustion process is responsible for the formation of UO 2.12 . Spin coating of the solutions and brief annealing at 670 K allow the deposition of uniform films of UO 2.12 with thicknesses up to 300 nm on an aluminum substrate. Irradiation of films with Ar 2+ ions (1.7 MeV energy, a fluence of up to 1 × 10 17 ions/cm 2 ) shows unusual defect-simulated grain growth and enhanced chemical mixing of UO 2.12 with the substrate due to the high uranium ion diffusion in films. As a result, the method described in this work allows the preparation of actinide oxide targets for fundamental nuclear science research and studies associated with stockpile stewardship.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2021

Irradiation-Driven Restructuring of UO 2 Thin Films: Amorphization and Crystallization

Combustion synthesis in uranyl nitrate–acetylacetone–2-methoxyethanol solutions was used to deposit thin UO 2 films on aluminum substrates to investigate the irradiation-induced restructuring processes. Thermal analysis revealed that the combustion reactions in these solutions are initiated at ~160 °C. The heat released during the process and the subsequent brief annealing at 400 °C allow the deposition of polycrystalline films with 5–10 nm UO 2 grains. The use of multiple deposition cycles enables tuning of the film thicknesses in the 35–260 nm range. Irradiation with Ar 2+ ions (1.7 MeV energy and a fluence of up to 1 × 10 17 ions/cm 2 ) is utilized to generate a uniform distribution of atomic displacements within the films. X-ray fluorescence (XRF) and alpha-particle emission spectroscopy showed that the films were stable under irradiation and did not undergo sputtering degradation. X-ray photoelectron spectroscopy (XPS) showed that the stoichiometry and uranium ionic concentrations remain stable during irradiation. The high-resolution electron microscopy imaging and electron diffraction analysis demonstrated that at the early stages of irradiation (below 1 × 10 16 ion/cm 2 ) UO 2 films show complete amorphization and beam-induced densification (sintering), resulting in a pore-free disordered film. Prolonged irradiation (5 × 10 16 ion/cm 2 ) is shown to trigger a crystallization process at the surface of the films that moves toward the UO 2 /Al interface, converting the entire amorphous material into a highly crystalline film. This work reports on an entirely different radiation-induced restructuring of the nanoscale UO 2 compared to the coarse-grained counterpart. The preparation of thin UO 2 films deposited on Al substrates fills an area of national need within the stockpile stewardship program of the National Nuclear Security Administration and fundamental research with actinides. Here, the method reported in this work produces pure, robust, and uniform thin-film actinide targets for nuclear science measurements

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗