Engineering topics
Mahadevan, Sankaran
Publications and source records attributed to Mahadevan, Sankaran.
Vibration-Based Techniques for Concrete Structural Health Monitoring. Light Water Reactor Sustainability Program report
The objectives of this ongoing research project focus on health monitoring and data analytics of concrete slabs containing reactive aggregates and thus subjected to degradation due to alkali-silica reaction (ASR). A controlled concrete slab with four pockets of reactive aggregates (pure silica, and reactive aggregates from three different quarries) was cast at Vanderbilt University and cured in representative conditions to accelerate degradation due to ASR. A set of four concrete samples were also cast and cured at the University of Alabama for ASR testing. Of these four samples, two slabs contained reactive aggregates while the other two had the non-reactive aggregate counterparts mixed throughout the samples. Four additional slabs were cast and cured at the University of Nebraska- Lincoln. Of these four samples; one contained non-reactive aggregates and no reinforcement, one contained reactive aggregates and no reinforcement, one contained reactive aggregates and rebar reinforcement in one direction, and the last contained reactive aggregates and reinforcement in two directions. Single frequency and dual frequency tests were used on these slabs to locate ASR damage within the specimens containing reactive aggregates. The vibration tests were conducted with different sensor and actuator configurations to facilitate damage detection and localization. The results from the data analysis of the dynamic testing on concrete slabs are discussed in detail in this report. Results for damage localization are dependent on multiple parameters used in the tests. This report investigates different methods of data fusion including voting, raw averaging, damage index averaging, and Bayesian fusion.
Uncertainty Quantification in Thermal Battery Performance Using a Roll-up Methodology.
Abstract not provided.
Uncertainty Quantification in Vibro-Acoustics Diagnosis of Alkali-Silica Reaction Degradation in Medium-Sized Concrete Samples
The objectives of this ongoing research project focus on health monitoring and data analytics of concrete slabs containing reactive aggregates and thus subjected to degradation due to alkali-silica reaction (ASR). A controlled concrete slab with four pockets of reactive aggregates (pure silica, wells, placitas, and spratt) was cast at Vanderbilt University and cured in representative conditions to accelerate degradation due to ASR. A set of four concrete samples were also cast and cured at the University of Alabama for ASR testing. Of these four samples, two slabs contained reactive aggregates while the other two had the non-reactive aggregate counterparts mixed throughout the samples. Vibro-acoustic testing was used on these slabs to locate ASR damage within the reactive samples. Vibro-acoustic modulation (VAM) is a vibration-based NDE method that utilizes signatures of nonlinear dynamic interactions on contact surfaces of crack or delamination damage to detect and localize the damage. VAM analysis was conducted on both the Vanderbilt and Alabama samples using multiple variables for damage detection and localization. The results from the data analysis of the vibro-acoustic testing on concrete slabs cured at Vanderbilt University and the University of Alabama are discussed in detail in this report. Results for damage localization are dependent on multiple variables used in the vibro-acoustic modulation experiments. A major focus of this report is to quantify the uncertainty in the diagnosis due to multiple factors and uncertainty sources. The uncertainty quantification methodology presented in this report was applied to VAM-based diagnosis and prognosis. However, the methodology is general, and is capable of being applied to multiple technique that collect spatially distributed data. Future work needs to investigate the incorporation of uncertainty quantification in developing a robust Prognostics and Health Management framework. Digital image correlation is a three-dimensional, full-field, optical NDE technique to measure contour, deformation, vibration, and strain. The application of the digital image correlation technique to study ASR-related degradation on a large concrete specimen at the University of Tennessee is discussed and observations are presented in this report.
Casting of Reinforced Concrete Beam: Project Progress
Aging concrete structures in nuclear power plants undergo mechanical, physical, chemical, and radioactive degradation. One of the chemical degradation mechanisms that is investigated in the research project under the Plant Modernization Pathway of the Light Water Reactor Sustainability Program is the alkali-silica reaction (ASR). The ASR is a chemical process that over time, causes expansion of calcium silicate hydrate gel. To date, the research project has studied the ASR gel formation and expansion in non-reinforced concrete specimens using vibro-acoustic modulation (VAM) technique. However, nuclear plant concrete structures are reinforced, and it might influence the application of VAM technique on reinforced concrete specimens compared to non-reinforced specimens. A research activity is initiated between Idaho National Laboratory, Vanderbilt University, and University of Nebraska - Lincoln to study the impact of reinforcement in concrete structures on the application of the VAM technique. To support this activity, University of Nebraska - Lincoln is casting and curing four reinforced concrete samples that at the end of the curing period will be transferred to Vanderbilt University to perform experimental VAM study. Vanderbilt University and Idaho National Laboratory will perform the data analysis and enhance the developed structural health monitoring framework. In this report, a progress on casting and curing of reinforced concrete samples at University of Nebraska – Lincoln is provided.
Uncertainty Quantification in Thermal Battery Performance Using a Roll-up Methodology.
Abstract not provided.
Enhancement of Structural Health Monitoring Framework by Optimizing Vibro-Acoustic Modulation Technique to Localize Alkali-Silica Reaction Degradation in Medium-Sized Concrete Samples
Assessment and management of aging concrete structures in nuclear power plants require a more systematic approach than simple reliance on existing code margins of safety. Health monitoring of concrete structures is performed to understand the current condition of a structure based on heterogeneous measurements and then produce high confidence actionable information regarding structural integrity. This information can then be used to support operational and maintenance decisions. The objectives of this ongoing research project focus on health monitoring and data analytics of concrete slabs containing reactive aggregates and thus subjected to degradation due to alkali-silica reaction (ASR). A controlled concrete slab with four pockets of reactive aggregates (pure silica, wells, placitas, and spratt) was cast at Vanderbilt University and cured in representative conditions to accelerate degradation due to ASR. A set of four concrete samples were also cast and cured at the University of Alabama for ASR testing. Of these four samples, two slabs contained reactive aggregates while the other two had the non-reactive aggregate counterparts mixed throughout the samples. Vibro-acoustic methods were used on these slabs to locate large pockets of ASR within the reactive samples and determine the effects of rebar using the non-reactive slabs. Vibro-acoustic modulation (VAM) is a vibration-based NDE method that utilizes signatures of nonlinear dynamic interactions on contact surfaces of crack or delamination damage to detect and localize the damage. VAM analysis was conducted on both Vanderbilt and Alabama’s samples using multiple variables for damage detection and localization. The results from the data analysis of the NDE vibro-acoustic techniques on concrete slabs cured at Vanderbilt University and the University of Alabama are discussed in detail in this report. The major outcome of the analysis suggests that the VAM method can be used to detect damage within the concrete samples by comparing the results found in different sections of the samples. Results for damage localization are dependent on multiple variables used in the vibro-acoustic modulation experiments. Digital image correlation (DIC) is a three-dimensional, full-field, optical NDE technique to measure contour, deformation, vibration, and strain. The application of the digital image correlation technique to study ASR-related degradation on a large concrete sample at the University of Tennessee Knoxville is discussed and observations are presented in this report.
Concrete structural health monitoring in nuclear power plants - 212
Assessment and management of aging concrete structures in nuclear power plants require a more systematic approach than simple reliance on existing code margins of safety. Health monitoring of concrete structures is performed in order to understand the current condition of a structure based on heterogeneous measurements and produce high-confidence actionable information regarding structural integrity. This information can be used to support operational and maintenance decisions. This paper describes a framework of research activities for health monitoring of nuclear power plant concrete structures. The proposed framework consists of four elements: (1) health monitoring, (2) data analytics, (3) uncertainty quantification, and (4) prognosis. The goal of this framework is to enable plant operators to make risk-informed decisions about structural integrity, remaining useful life, and performance of concrete structures across the nuclear fleet. Among several concrete degradations, research focuses on degradation caused by the alkali-silica reaction (ASR). ASR is a chemical reaction that, in the presence of sufficient moisture, forms a gel that increases in volume and exerts an expansive pressure inside the material, thus causing micro to macro-cracks. This paper also presents development of controlled concrete samples with reactive aggregates to cause ASR degradation and application of different non-destructive evaluation techniques to detect the damage caused by ASR. Initial results are presented in the paper along with a potential path forward. (authors)
Calibration experimental design considering field response and model uncertainty
Not Available
Light Water Reactor Sustainability Program Interrogation of Alkali-Silica Reaction Degraded Concrete Samples using Acoustic and Thermal Techniques to Support Development of a Structural Health Monitoring Framework
Assessment and management of aging concrete structures in nuclear power plants require a more systematic approach than simple reliance on existing code margins of safety. Health monitoring of concrete structures is performed to understand the current condition of a structure based on heterogeneous measurements and then produce high-confidence actionable information regarding structural integrity. This information can then be used to support operational and maintenance decisions. The proposed diagnosis and prognosis framework consists of four elements: health monitoring, data analytics, uncertainty quantification, and prognosis. The objectives of this ongoing research project focuses on health monitoring and data analytics of concrete slab cast, which is cured using four pockets of reactive aggregates: pure silica, wells, placitas, and spratt. A controlled concrete slab with four aggregates is cast at Vanderbilt University in representative conditions to accelerate degradation due to alkali-silica reaction (ASR). Four nondestructive evaluation (NDE) techniques (thermography, mechanical deformation measurements, nonlinear impact resonance-acoustic spectroscopy, and vibro-acoustic modulation) are used to examine the degraded concrete slab. Heterogeneous data from these techniques are analyzed for assessing ASRrelated degradation in concrete samples. In addition, this report discusses thermography assessment of three cement bricks cured under different conditions to accelerate ASR-related degradation. The application of the digital image correlation technique to study ASR-related degradation on a large concrete sample at the University of Tennessee Knoxville is discussed and initial observations are presented in this report. The results from the data analysis of the NDE techniques on concrete slab cured at Vanderbilt University are discussed in detail in this report. The major outcome of the analysis suggests that the nonlinear impact resonance acoustic spectroscopy is able to detect potential degradation in a concrete slab but is unable to locate or isolate the degradation. Alternatively, the vibro-acoustic technique is able to detect degradation and locate the damage in the concrete slab cast. The outcomes supports development of a structural health monitoring framework.
Concrete Structural Health Monitoring in Nuclear Power Plants
Assessment and management of aging concrete structures in nuclear power plants require a more systematic approach than simple reliance on existing code margins of safety. Health monitoring of concrete structures is performed in order to understand the current condition of a structure based on heterogeneous measurements and then produce high confidence actionable information regarding structural integrity; this information can then be used to support operational and maintenance decisions. The paper describes a framework of research activities for the health monitoring of nuclear power plant concrete structures. The proposed framework consists of four elements: health monitoring, data analytics, uncertainty quantification, and prognosis. The goal of this framework is to enable plant operators to make risk-informed decisions on structural integrity, remaining useful life, and performance of concrete structures across the nuclear fleet. Among several concrete degradations, the research focuses on the degradation caused by the Alkali-Silica Reaction (ASR). ASR is a chemical reaction that in presence of sufficient moisture forms a gel that increases in volume and exerts an expansive pressure inside the material causing micro- to macro-cracks. The paper also presents development of controlled concrete samples with reactive aggregates to cause ASR degradation and application of different non-destructive evaluation techniques to detect the damage caused by ASR. Initial results are presented in the paper along with potential path forward.
Optimal test selection for prediction uncertainty reduction
Economic factors and experimental limitations often lead to sparse and/or imprecise data used for the calibration and validation of computational models. This paper addresses resource allocation for calibration and validation experiments, in order to maximize their effectiveness within given resource constraints. When observation data are used for model calibration, the quality of the inferred parameter descriptions is directly affected by the quality and quantity of the data. This paper characterizes parameter uncertainty within a probabilistic framework, which enables the uncertainty to be systematically reduced with additional data. The validation assessment is also uncertain in the presence of sparse and imprecise data; therefore, this paper proposes an approach for quantifying the resulting validation uncertainty. Since calibration and validation uncertainty affect the prediction of interest, the proposed framework explores the decision of cost versus importance of data in terms of the impact on the prediction uncertainty. Often, calibration and validation tests may be performed for different input scenarios, and this paper shows how the calibration and validation results from different conditions may be integrated into the prediction. Then, a constrained discrete optimization formulation that selects the number of tests of each type (calibration or validation at given input conditions) is proposed. Furthermore, the proposed test selection methodology is demonstrated on a microelectromechanical system (MEMS) example.
An efficient modularized sample-based method to estimate the first-order Sobol׳ index
Not Available
Digital Image Correlation of Concrete Slab at University of Tennessee, Knoxville
Assessment and management of aging concrete structures in nuclear power plants require a more systematic approach than simple reliance on existing code margins of safety. Some degradation mechanisms of concrete manifest themselves via swelling or by other shape deformation of the concrete. Specifically, degradation of concrete structure damaged by ASR is viewed as one of the dominant factors impacting the structural integrity of aging nuclear power plants. Structural health monitoring of concrete structures aims to understand the current health condition of a structure based on heterogeneous measurements to produce high-confidence actionable information regarding structural integrity that supports operational and maintenance decisions. Number of nondestructive examination techniques (i.e., thermography, digital image correlation, mechanical deformation measurements, nonlinear impact resonance (DIC) acoustic spectroscopy, and vibro-acoustic modulation) is used to detect the damage caused by ASR. DIC techniques have been increasing in popularity, especially in micro- and nano-scale mechanical testing applications due to its relative ease of implementation and use. Advances in computer technology and digital cameras help this method moving forward. To ensure the best outcome of the DIC system, important factors in the experiment are identified. They include standoff distance, speckle size, speckle pattern, and durable paint. These optimal experimental options are selected basing on a thorough investigation. The resulting DIC deformation map indicates that this technique can be used to generate data related to degradation assessment of concrete structure damaged by the impact of ASR.
Role of calibration, validation, and relevance in multi-level uncertainty integration
Not Available