Engineering topics
Publications and source records attributed to Macie, T. W..
The interface issues between the intermediate-size Power Conditioning Subsystem (PCS) and the utility are considered. A literature review yielded facts about the status of identified issues.
The enabling legislation of 1976 for improvement of service in the Northeast corridor (NEC) requires a schedule of 2 h 40 min between Washington and New York City by 1981 and 3 h 40 min between NYC and Boston, when the electrification is completed. Various options of the NEC operation that may satisfy the legislation were investigated, particularly in terms of travel time and energy consumption. NEC operations were compared with overseas systems and practices. The emerging new technology of AC traction was also evaluated.
An investigation has been conducted in order to assess the impact of magnetic fields generated by the propulsion module upon the scientific instrumentation of the spacecraft as proposed for the mission to comet Encke. It was found that dc magnetic fields could potentially be a threat to the magnetometer experiment, whereas ac fields could affect the plasma wave experiment instrumentation. Studies included a set of measurements, computer simulation, and mathematical analyses. Ways for achieving the compatibility of the propulsion module with science are studied and recommendations advanced.
A concept for automatic control of the thrust subsystem has been developed by JPL and participating NASA Centers. This paper reports on progress in implementing the concept at JPL. Control of the Thrust Subsystem (TSS) is performed by the spacecraft computer command subsystem, and telemetry data is extracted by the spacecraft flight data subsystem. The Data and Control Interface Unit, an element of the TSS, provides the interface with the individual elements of the TSS. The control philosophy and implementation guidelines are presented. Control requirements are listed, and the control mechanism, including the serial digital data intercommunication system, is outlined. The paper summarizes progress to Fall 1974.
A study to define the power processing equipment required between a thermionic reactor and an array of mercury-ion thrusters for a nuclear electric propulsion system is reported. Observations and recommendations that resulted from this study were: (1) the preferred thermionic-fuel-element source voltages are 23 V or higher; (2) transistor characteristics exert a strong effect on power processor mass; (3) the power processor mass could be considerably reduced should the magnetic materials that exhibit low losses at high frequencies, that have a high Curie point, and that can operate at 15 to 20 kG become avaliable; (4) electrical component packaging on the radiator could reduce the area that is sensitive to meteoroid penetration, thereby reducing the meteoroid shielding mass requirement; (5) an experimental model of the power processor design should be built and tested to verify the efficiencies, masses, and all the automatic operational aspects of the design.
Electric and magnetic interference generated by a power conditioner and ion thruster were measured at JPL. Test results were judged by comparing the measured levels to the levels defined by the solar electric propulsion (SEP) specification that was derived from the existing mission oriented Viking-Orbiter 1975 and Mariner-Jupiter-Saturn 1977 electromagnetic compatibility specifications. In many areas the measured interference was excessive. In some cases, the cause of interference was identified. It was concluded that it should be possible on future designs to improve the EMI characteristics greatly at a modest penalty to weight and efficiency.
Electrical, multikilowatt power conditioning (PC) equipment needed on board a spacecraft utilizing solar electric propulsion creates an electromagnetic environment that is potentially deterimental to the science, navigation, and radio communication hardware. Within the scope of the solar electric propulsion system technology program, three lightweight, 2.5-kW PCs were evaluated in terms of their electromagnetic characteristics. It was found that the levels of radiated and conducted interference exceeded the levels anticipated for a solar electric propulsion mission. These noise emissions, however, were the result of deficient interference design in these models, rather than a basic inability to control interference in this type of PC.
Achievements in the solar electric propulsion system technology program (SEPST 3) are reported and certain propulsion system-spacecraft interaction problems are discussed. The basic solar electric propulsion system concept and elements are reviewed. Hardware is discussed only briefly, relying on detailed fabrication or assembly descriptions reported elsewhere. Emphasis is placed on recent performance data, which are presented to show the relationship between spacecraft requirements and present technology.
Oxide hollow cathode ion thruster power conditioner, evaluating electrical efficiency, weight, reliability integration and testing
The successful integration of a light-weight, high-efficiency power conditioning (PC) unit with an electron bombardment ion thruster using a hollow cathode at JPL has been reported recently. This paper summarizes the presently conceived requirements by which the next generation of PCs should be judged and evaluated. The requirements are formulated in terms of a deep space mission, which implies that the characteristics of the solar source will vary in terms of output power and output voltage. The requirements identified by practical experience during long-term evaluation between 1968-1970 are described and explained.
Solid state switching matrix for solar electric propulsion
Design and performance of solar-powered electric propulsion system for interplanetary space exploration
Solar electric propulsion system performance consisting of thrustors with thrust vector aligning actuators, switching network and flight type power conditioner
Solar electric propulsion systems technology development at JPL, discussing performance data and relationship to spacecraft requirements
Solar electric propulsion system performance consisting of thrustors with thrust vector aligning actuators, switching network and flight type power conditioner