Engineering Papers⌕ Search

Engineering topics

Macconochie, I. O.

Publications and source records attributed to Macconochie, I. O..

32 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

A towing concept for orbital transfer of large space structures

Many studies are being made to determine the most efficient method for the transfer of large space structures from low earth orbits (LEO) to higher altitudes, principally geosynchronous orbits. In this paper, towing is proposed as a possible means of orbital transfer of large space structures. A potential towing arrangement is identified and some of the systems sized for the transfer of a 2460-ft (750 meter) diameter antenna weighing approximately 154,000 lbs (70 metric tons). A savings of approximately 23 metric tons in propellants and structure resulted from the use of a towing arrangement using six towlines in parallel when compared to the use of a single tug hard mounted to the structure being towed. The towing concept appears practical and affords a means of applying loads using multiple towlines to a wide variety of structures without special adaptors.

Macconochie, I. O.↗
NASA NTRS1981

Miniature personal UV solar dosimeter

Small light-powered meter measures accumulated radiation in ultraviolet or other selected regions. Practical advantages are device's low cost, small size, accuracy, and adaptability to specific wave-band measurements. Medical applications include detection of skin cancer, vitamin D production, and jaundice. Dosimeter also measures sunlight for solar energy designs, agriculture and meteorology, and monitors stability of materials and environmental and occupational lighting.

Adams, R. R.↗
NASA NTRS1980

Miniature spectrally selective dosimeter

A miniature spectrally selective dosimeter capable of measuring selected bandwidths of radiation exposure on small mobile areas is described. This is achieved by the combination of photovoltaic detectors, electrochemical integrators (E-cells) and filters in a small compact case which can be easily attached in close proximity to and substantially parallel to the surface being measured. In one embodiment two photovoltaic detectors, two E-cells, and three filters are packaged in a small case with attaching means consisting of a safety pin. In another embodiment, two detectors, one E-cell, three filters are packaged in a small case with attaching means consisting of a clip to clip over a side piece of an eye glass frame.

Adams, R. R.↗
NASA NTRS1980

Technologies involved in configuring an advanced earth-to-orbit transport for low structural mass

A tradeoff study for a single-stage, earth-to-orbit transport spacecraft configured with low structural mass as the prime objective is presented. Among the major design elements affecting vehicle mass are: maneuverability and re-entry heating, the compatibility of an irregular cargo bay geometry to future mission requirements, the fabrication and assembly of large honeycomb structure fuselage sections, and the development of LOX/LH2 engine extendable nozzles and dual-propulsion schemes. It is shown that vehicle geometry and materials and structural technologies will be the critical areas in the development of such a system.

Macconochie, I. O.↗
NASA NTRS1979

Mass estimating techniques for earth-to-orbit transports with various configuration factors and technologies applied

A study of an array of advanced earth-to-orbit space transportation systems with a focus on mass properties and technology requirements is presented. Methods of estimating weights of these vehicles differ from those used for commercial and military aircraft; the new techniques emphasizing winged horizontal and vertical takeoff advanced systems are described utilizing the space shuttle subsystem data base for the weight estimating equations. The weight equations require information on mission profile, the structural materials, the thermal protection system, and the ascent propulsion system, allowing for the type of construction and various propellant tank shapes. The overall system weights are calculated using this information and incorporated into the Systems Engineering Mass Properties Computer Program.

Klich, P. J.↗
NASA NTRS1979

Configuration considerations in the design of earth-to-orbit transports

The various configuration options for earth-to-orbit transports are discussed with specific attention given to: ballistic vs. winged vehicles; horizontal takeoff vs. vertical takeoff; two stage vs. single stage; rocket propulsion system options; structure and thermal protection systems options; and weight growth vs. size. It is suggested that the single-stage system has many attractive features such as the elimination of booster-to-orbiter mating problems and the elimination of the need for the development of a cruise system. From the standpoint of weight reduction, it appears desirable to combine as many functions as possible in the outer shell of the transport system.

Macconochie, I. O.↗
NASA NTRS1979

Preliminary design and analysis of large delta wings for earth-to-orbit transports

Two studies are described in which CAD methods are used for preliminary design of advanced earth-to-orbit transport wings. The first structural concept was a multilayer honeycomb wing composed of diffusion-bonded Inconel 718; the second concept (in which structural simplicity was sought) involved a honeycomb sandwich wing, for which only a leading edge and trailing edge spar were used. Some new technologies applicable to advanced wing designs are briefly discussed.

Lemessurier, R. W.↗
NASA NTRS1979

Two priority cargo earth-to-orbit transports

Two priority cargo earth-to-orbit transports are described. One of the vehicles is powered by all-LOX/hydrogen rocket engines. The vehicle is launched vertically but is equipped with aero-surfaces (delta wings and canards) for horizontal landing. The second vehicle is powered by engines utilizing dual fuels (hydrogen and hydrocarbon), the latter concept giving a more compact vehicle. The vehicle is designed for horizontal takeoff and horizontal landing. Both vehicle concepts are used for identification of possible future technology needs.

Macconochie, I. O.↗
NASA NTRS1979

Preliminary design for a space based orbital transfer vehicle

A space-based orbital transfer vehicle has been sized for a 50-metric-ton payload delivery from low-earth-orbit to a geosynchronous orbit. Space basing effected substantial reductions in cryogenic insulation, tank, and body structure. The tank and body structural masses are shown to be lower for space basing because of the larger difference in acceleration loads between the on-orbit case (0.2 g's) and delivery (3.0 g's), the latter applying to ground-based vehicles which are delivered to orbit fully loaded with propellants. Insulation masses are lower because of the absence of an atmosphere and the attendant heat transfer losses. Insulation systems masses are also reduced because of the elimination of the problem of liquefaction and freezing of moisture on the tanks.

Macconochie, I. O.↗
NASA NTRS1979

Several preliminary designs for heavy-lift earth-to-orbit transport

Several design concepts are identified for earth-to-orbit delivery of payloads in the 200 Mg range. The concept include winged vehicles which take-off vertically and land horizontally and ballistic shapes similar to the Gemini or Mercury vehicles which take-off and land vertically. Major technology issues include stability problems for the winged vehicle with large base mounted engines and heat shield design problems for the ballistic vehicle, the latter requiring doors in the heat shield for the main engines.

Brien, E. P.↗
NASA NTRS1978

Space shuttle orbiter trimmed center-of-gravity extension study. Volume 6: System design studies

System studies were made to determine the required changes in shuttle orbiter mass for various changes in aerodynamic shape. These changes are designed to extend the current shuttle orbiter trimmed c.g. envelope to accommodate a greater range of payloads. One of the apparently most viable changes for the amount of c.g. extension obtained involves the removal of the present wing/body fillet and the replacement of this structural element with a forward located fixed canard.

Macconochie, I. O.↗
NASA NTRS1978

Propulsion options for space-based orbital transfer vehicles

A concept for a lightweight space-based orbital transfer vehicle (OTV) featuring thin, spherical, pressure-designed aluminum liquid-oxygen and liquid-hydrogen tanks and a truss structure of composite materials is used as a baseline design for a large-cargo OTV. Vehicle sizing, fleet analysis, and parametric cost analysis are used to evaluate the effects of engine technology, vehicle staging, and high-thrust versus low-thrust transfer. Results indicate that Earth-to-orbit launch costs and OTV engine performance are strong drivers in orbital transportation cost and that there is no significant benefit in staging vehicles. At the low values of Earth-to-orbit cost representative of advanced launch vehicles, low-thrust and high-thrust OTV's are competitive.

Rehder, J. J.↗
NASA NTRS1978

Techniques for the determination of mass properties of earth-to-orbit transportation systems

One estimating technique involves trending whereby projections of overall mass properties of vehicles are determined with few inputs. The second technique involves trending of individual subsystems using equations of the form KXN to the nth power or KX. Some constants and exponentials are provided for sample subsystems. Mass properties are reported in a format recommended by mil spec - 38310.

Macconochie, I. O.↗